Carbenes reaction with ethers

If chiral catalysts are used to generate the intermediate oxonium ylides, non-racemic C-O bond insertion products can be obtained [1265,1266]. Reactions of electrophilic carbene complexes with ethers can also lead to the formation of radical-derived products [1135,1259], an observation consistent with a homolysis-recombination mechanism for 1,2-alkyl shifts. Carbene C-H insertion and hydride abstraction can efficiently compete with oxonium ylide formation. Unlike free car-benes [1267,1268] acceptor-substituted carbene complexes react intermolecularly with aliphatic ethers, mainly yielding products resulting from C-H insertion into the oxygen-bound methylene groups [1071,1093]. 

Similar carbene insertion reactions with ethers are also very well known. Apart from direct C-H insertion, attack on oxygen can occur to form a very reactive dialkyloxonium methylide. ... 

Contents Introduction and Principles. - The Reaction of Dichlorocarbene With Olefins. - Reactions of Dichlorocarbene With Non-Olefinic Substrates. -Dibromocarbene and Other Carbenes. - Synthesis of Ethers. - Synthesis of Esters. - Reactions of Cyanide Ion. - Reactions of Superoxide Ions. - Reactions of Other Nucleophiles. - Alkylation Reactions. - Oxidation Reactions. - Reduction Techniques. - Preparation and Reactions of Sulfur Containing Substrates. -Ylids. - Altered Reactivity. - Addendum Recent Developments in Phase Transfer Catalysis. 

Intermolecular [4C+2S] cycloaddition reactions where the diene moiety is contained in the carbene complex are less frequent than the [4S+2C] cycloadditions summarised in the previous section. However, 2-butadienylcarbene complexes, generated by a [2+2]/cyclobutene ring opening sequence, undergo Diels-Alder reactions with typical dienophiles [34,35] (Scheme 59). Also, Wulff et al. have described the application of pyranylidene complexes, obtained by a [3+3] cycloaddition reaction (see Sect. 2.8.1), in the inverse-electron-demand Diels-Alder reaction with enol ethers and enamines [87a]. Later, this strategy was applied to the synthesis of steroid-like ring skeletons [87b] (Scheme 59). 

Sulfur-stabilized ylides underwent photodriven reaction with chromium alkoxy-carbenes to produce 2-acyl vinyl ethers as E/Z mixtures with the E isomer predominating (Table 22) [ 121-123]. The reaction is thought to proceed by nucleophilic attack of the ylide carbon at the chromium carbene carbon followed by elimination of (CO)5CrSMe2. The same reaction occurred thermally, but at a reduced rate. Sulfilimines underwent a similar addition/elimination process to produce imidates or their hydrolysis products (Table 23) [ 124,125]. Again the reaction also proceeded thermally but much more slowly. Less basic sulfilimines having acyl or sulfonyl groups on nitrogen failed to react. 

Given the zwitterionic natnre of single carbenes, the possibility exists for coordinating solvents such as ethers or aromatic compounds to associate weakly with the empty p-orbital of the carbene. Several experimental stndies have revealed dramatic effects of dioxane or aromatic solvents on prodnct distribntions of carbene reactions. Computational evidence has also been reported for carbene-benzene complexes. Indeed, picosecond optical grating calorimetry stndies have indicated that singlet methylene and benzene form a weak complex with a dissociation energy of 8.7kcal/mol. ... 

In either neat dioxane or THF, carbene-ether ylides are observed as a broad IR absorption band between 1560 and 1610 cm , distinct from the IR bands of the free carbenes. With discrete spectroscopic signatures for the free carbene and its corresponding ether ylides, TRIR spectroscopy was used to confirm that the effects described above with dilute ether in Freon-113 were due to specific solvation of the carbene (Scheme 4.6, Reaction 2) rather than a pre-equilibration with the coordinating solvent (Scheme 4.6, Reaction 3) or reactivity of the ylide itself (Scheme 6, Reaction 4). In Freon-113 containing 0.095M THF simultaneous TRIR observation of both the free carbene (x = ca. 500 ns) and the carbene-THF ylide (x = ca. 5ps) was possible7 The observation that lifetimes of these species were observed to be so different conclusively demonstrates that the free carbene and the carbene-THF ylide are not in rapid equilibrium and that Reaction 3 of Scheme 4.6 is not operative. By examining the kinetics of the carbene 34 at 1635 cm directly in Freon-113 with small amounts of added dioxane, it was observed that the rate of reaction with TME was reduced, consistent with Reaction 2 (and not Reaction 4) of Scheme 4.6. 

Alkenes are scavengers that are able to differentiate between carbenes (cycloaddition) and carbocations (electrophilic addition). The reactions of phenyl-carbene (117) with equimolar mixtures of methanol and alkenes afforded phenylcyclopropanes (120) and benzyl methyl ether (121) as the major products (Scheme 24).51 Electrophilic addition of the benzyl cation (118) to alkenes, leading to 122 and 123 by way of 119, was a minor route (ca. 6%). Isobutene and enol ethers gave similar results. The overall contribution of 118 must be more than 6% as (part of) the ether 121 also originates from 118. Alcohols and enol ethers react with diarylcarbenium ions at about the same rates (ca. 109 M-1 s-1), somewhat faster than alkenes (ca. 108 M-1 s-1).52 By extrapolation, diffusion-controlled rates and indiscriminate reactions are expected for the free (solvated) benzyl cation (118). In support of this notion, the product distributions in Scheme 24 only respond slightly to the nature of the n bond (alkene vs. enol ether). The formation of free benzyl cations from phenylcarbene and methanol is thus estimated to be in the range of 10-15%. However, the major route to the benzyl ether 121, whether by ion-pair collapse or by way of an ylide, cannot be identified. 

If the reaction rates of a specific carbene with various quenchers are studied in the same solvent, and with small concentrations of Q, K will be constant. Relative reactivities for the singlet state of a spin-equilibrated carbene can thus be derived. However, few researchers have varied the acidity of ROH, estimated kinetic isotope effects, and compared alcohols with ethers (Table 4). The data indicate proton transfer to diarylcarbenes (139d, 139k, 205, 206)112-117 and diadamantylcarbene (207).118... 

The difference in reactivity between isoprenol and isoprenyloxide, methal-lyl methyl ether and methallyloxide were investigated in the reaction with (phenylthio)carbene generated under phase-transfer conditions. With isoprenol, (phenylthio)methyl ether (41%) was the major product, whereas with methyl ether cyclopropanation (36%) was the sole reaction.1519 With alkoxides, in contrast, the major product was the C-H insertion product (45%) and (phenyl-... 

Vinylidenecarbene or allenylidene3 (R)2C=C=C has a lance-shaped, unsubstituted and sp-hybridized carbene center and, therefore, will not be easily subject to steric hindrance in its insertion reactions. On this assumption, (2-methyljpropenylidenecarbene or its carbenoid was chosen as a prototype of typical vinylidenecarbenes and its insertion reaction with several different types of alkoxides was investigated by employing two methods (A and B, Scheme 10) for carbene generation.20 The insertion products 20 were obtained almost exclusively except lithium allyloxide (Table 4, entry 10).21 By-products such as propargyl ether and allenyl ether were not formed at all. To be noted here, in... 

Whichever mechanism operates, it appears to be generally true that singlet aromatic carbenes react with the lower alcohols to form ethers at rates approaching the diffusion limit. On the other hand, aromatic carbenes that are clearly triplets do not give any ether at all from reaction with alcohols. Instead, these triplets behave as is expected of biradicals and abstract a hydrogen atom from the oxygen bearing carbon of the alcohol. The stable products of this reaction are those due to the combination and disproportionation (10) of the pair of radicals (Lapin et al., 1984). The more com-... 

Cyclopropanation of l,3-dienes. a,0-Unsaturated carbenes can undergo [4 + 2]cycloaddition with 1,3-dienes (12, 134), but they can also transfer the carbene ligand to an isolated double bond to form cyclopropanes. Exclusive cyclopropanation of a 1,3-diene is observed in the reaction of the a,(3-unsaturated chromium carbene 1 with the diene 2, which results in a frans-divinylcyclopropane (3) and a seven-membered silyl enol ether (4), which can be formed from 3 by a Cope rearrangement. However, the tungsten carbene corresponding to 1 undergoes exclusive [4 + 2]cycIoaddition with the diene 2. 

The catalytic activity of rhodium diacetate compounds in the decomposition of diazo compounds was discovered by Teyssie in 1973 [12] for a reaction of ethyl diazoacetate with water, alcohols, and weak acids to give the carbene inserted alcohol, ether, or ester product. This was soon followed by cyclopropanation. Rhodium(II) acetates form stable dimeric complexes containing four bridging carboxylates and a rhodium-rhodium bond (Figure 17.8). 

The reaction of acceptor-substituted carbene complexes with alcohols to yield ethers is a valuable alternative to other etherification reactions [1152,1209-1211], This reaction generally proceeds faster than cyclopropanation [1176], As in other transformations with electrophilic carbene complexes, the reaction conditions are mild and well-suited to base- or acid-sensitive substrates [1212], As an illustrative example, Experimental Procedure 4.2.4 describes the carbene-mediated etherification of a serine derivative. This type of substrate is very difficult to etherify under basic conditions (e.g. NaH, alkyl halide [1213]), because of an intramolecular hydrogen-bond between the nitrogen-bound hydrogen and the hydroxy group. Further, upon treatment with bases serine ethers readily eliminate alkoxide to give acrylates. With the aid of electrophilic carbene complexes, however, acceptable yields of 0-alkylated serine derivatives can be obtained. 

In 1985, Dbtz et al. reported during a study on the reaction of Fischer-type carbene complexes with alkynes [10] that 2-oxacyclopentylidene chromium complex 24 was obtained as a side product. Thus, treatment ofmethyl(methoxy)carbene complex with 3-butynol at 70 °C in dibutyl ether gave the cyclic carbene complex 24 in 23% yield along with the desired metathesis product 23. The authors briefly commented that the cyclic carbene complex 24 might be obtained through the vinylidene complex 25, generated by the reaction of the alkyne with the liberated pentacarbonylchromium species (Scheme 5.7). 

The oxygen as heteroatom in ethers or carbonyl compounds is weak to moderate Lewis base. Nevertheless, a highly reactive metal carbene complex can interact with the oxygen to generate oxygen ylide. The interaction between ether and metal carbene functional groups is believed to be rather weak as demonstrated by the facts that other metal carbene reactions, such as G-H insertion and cyclopropanation, can proceed in ethereal solvents." These experiments demonstrate that the formation of the metal ylide is much less favored in the equilibrium shown in Equation (1). ... 

However, difluoromethylation occurs when nucleophiles intercept difluoro-carbene generated under basic conditions, providing a route to difluoromethyl-ethers of phenols [33] and thiophenols [34]. The reaction with phosphite anion leads to the corresponding difluoromethyl phosphonate (see Sect. 2.3.2) while nucleophilic carbanions such as alkynes [35] also undergo formal alkylation, as do malonates [36,37]. An -difluoromethylaziridine was reported in a reaction with a glycine imine [38]. The scope of the established chemistry is summarised in Fig. 1. Bromodifluoromethylation occurs with a similar range of nucleophiles [39,40], and also with carbonyl-stabilised carbanions such as malonates [41,42]. 

Aldol reactions.1 The anion generated (BuLi) from chromium carbene complexes undergoes aldol reactions with aldehydes or ketones activated by a Lewis acid. Best results are obtained with ketones in the presence of BF3 etherate, whereas TiCl4 is the preferred catalyst for aldehydes and acetals. 

Cyclopropane formation occurs from reactions between diazo compounds and alkenes, catalyzed by a wide variety of transition-metal compounds [7-9], that involve the addition of a carbene entity to a C-C double bond. This transformation is stereospecific and generally occurs with electron-rich alkenes, including substituted olefins, dienes, and vinyl ethers, but not a,(J-unsaturated carbonyl compounds or nitriles [23,24], Relative reactivities portray a highly electrophilic intermediate and an early transition state for cyclopropanation reactions [15,25], accounting in part for the relative difficulty in controlling selectivity. For intermolecular reactions, the formation of geometrical isomers, regioisomers from reactions with dienes, and enantiomers must all be taken into account. 

Dioximato-cobalt(II) catalysts are unusual in their ability to catalyze cyclopropanation reactions that occur with conjugated olefins (e.g., styrene, 1,3-butadiene, and 1-phenyl-1,3-butadiene) and, also, certain a, 3-unsaturated esters (e.g., methyl a-phenylacrylate, Eq. 5.13), but not with simple olefins and vinyl ethers. In this regard they do not behave like metal carbenes formed with Cu or Rh catalysts that are characteristically electrophilic in their reactions towards alkenes (vinyl ethers > dienes > simple olefins a,p-unsaturated esters) [7], and this divergence has not been adequately explained. However, despite their ability to attain high enantioselectivities in cyclopropanation reactions with ethyl diazoacetate and other diazo esters, no additional details concerning these Co(II) catalysts have been published since the initial reports by Nakamura and Otsuka. 

Transition-metal mediated carbene transfer from 205 to benzaldehyde generates carbonyl ylides 211 which are transformed into oxiranes 216 by 1,3-cyclization, into tetrahydrofurans 212, 213 or dihydrofurans 214 by [3 + 2] cycloaddition with electron-deficient alkenes or alkynes, and 1,3-dioxolanes 215 by [3 + 2] cycloaddition with excess carbonyl compound120 (equation 67). Related carbonyl ylide reactions have been performed with crotonaldehyde, acetone and cyclohexanone (equation 68). However, the ylide generated from cyclohexanone could not be trapped with dimethyl fumarate. Rather, the enol ether 217, probably formed by 1,4-proton shift in the ylide intermediate, was isolated in low yield120. In this respect, the carbene transfer reaction with 205 is not different from that with ethyl diazoacetate121, whereas a close analogy to diazomalonates is observed for the other carbonyl ylide reactions. 

---