Basic technical characteristics

The main interfaces and boundaries between on-site equipment and systems provided by different design organizations should be described, together with interfaces with equipment and systems external to the plant (including, for example, the electricity grid), with sufficient detail of the way in which plant operation is co-ordinated. 

This section may, if required, also include or refer to confidential information on the provisions made for the physical protection of the plant. In some States this may also include coverage of the steps taken to provide protection in the event of malicious action on or off the site. 

---

The basic technical characteristics of the wiistite-based catalyst (A301 and ZA-5) for ammonia synthesis are high activity at low-temperatme, and easy reduction. The following results could be obtained by comparison with the magnetite-based catalyst under the same conditions. 

Basic element of a sorber is metal hydride. Beside physicochemical characteristics, it has technical characteristics (fine or coarse powder, compound or composite). Freely filled powder has the certain bulk density and is characterized by porosity in the limits of e - 0.259 - 0.476 [1],... 

Other compounds that can be produced directly from biomass in good yields, but which do not retain the basic structural characteristics of biomass, are also classified as commodity chemicals. Examples are acetic acid, methane, and synthesis gas. They are not manufactured in large volumes from biomass because fossil fuels are the preferred feedstocks in commercial production systems. Technically, biomass can serve as a feedstock for production of the entire range of commodity organic chemicals presently manufactured from fossil fuels. The various routes to large-volume chemicals from biomass will be examined later. Consider first some of the existing biomass-based chemicals, most of which are specialty chemicals that are manufactured for commercial markets. 

Indirectly heated, horizontally arranged, rotary kiln for Thermal Desorption and low temperature carbonisation of the 0 5 mm input basic material, containing the following technical characteristics ... 

P. Cognard Technical Characteristics and Testing Methods for Adhesives and Sealants. Adhesives and Sealants Basic Concepts and High Tech Bonding Vol. 1, Elsevier (2005). 

Different cryolite ratios and additives in different ways influence the basic technical and economic characteristics of the reduction process, improving one characteristic and decreasing another. Currently, it is impossible to describe the optimal composition of electrolyte, and the situation with smelters depends on various local circumstances, including raw materials, energy costs, and design of cells, among other factors. 

All readers should read the several general chapters such as Technical characteristics of adhesives and sealants , Application equipment , Physics and chemistry of adhesives and sealants , as these will provide the basic information required in order to understand other chapters. 

The basic condition of the Standard application - the availability of stable coupled probabilistic or the multiple probabilistic relations between then controlled quality indexes and magnetic characteristics of steel. All the probabilistic estimates, used in the Standard, are applied at confidence level not less than 0,95. General requirements to the means of control and procedure of its performance are also stipulated. Engineers of standard development endeavoured take into consideration the existed practice of technical control performance and test at the enterprises that is why the preparation of object control for the performance of nondestructive test can be done during the process of ordinary acceptance test. It is suggested that every enterprise is operated in correspondence with direct and non-destructive tests, obtained exactly at it, for detailed process chart and definite product type, however the tests have long since been performed after development of the Standard displayed that process gives way to unification. 

The purpose of this subsection is to familiarize the reader with some of the basic characteristics and problems of composite laminate joints. The specific design of a joint is much too complex for an introductory textbook such as this. The published state-of-the-art of laminate joint design is summarized in the Structural Design Guide for Advanced Composite Applications [7-5] and Military Handbook 17A, Plastics for Aerospace Vehicles, Part 1, Reinforced Plastics [7-6]. Further developments can be found in the technical literature and revisions of the two preceding references. 

Research (on medicines). Numerous definitions of research are used both in the literature and among scientists. In the broadest sense, research in the pharmaceutical industry includes all processes of medicine discovery, preclinical and clinical evaluation, and technical development. In a more restricted sense, research concentrates on the preclinical discovery phase, where the basic characteristics of a new medicine are determined. Once a decision is reached to study the medicine in humans to evaluate its therapeutic potential, the compound passes from the research to the development phase. 

Support for the evaluation of the non-technical make up of a candidate is very commonly sought by carrying out some form of psychometric tests on the candidates. Psychometric tests are designed to assess either ability (cognitive tests) or personality characteristics and there are three basic types ones to assess a specific ability, e.g. numeracy, verbal and spatial perception ones to test general mental ability, e.g. an-... 

The methods used in predicting these thermodynamic properties employ (a) an equation of state, relating the pressure-volume-temperature characteristics of the fluids (b) ideal gas state heat capacities of the individual components and (c) binary interaction coefficients between the components. The development of these basic relationships is not within the scope of this paper. Technical literature sources of the thermodynamic equations and data are given in the references. 

The Technical Services function of AOCS establishes, revises, and annually updates AOCS Methods, the Official Methods and Recommenced Practices of the American Oil Chemists Society22 for fats, oils, and soap technology Spanish AOCS Methods, a Spanish translation of the more commonly used AOCS Methods and Physical and Chemical Characteristics of Oils, Fats and Waxes. Leaders of the methods development committees coordinate closely with AOAC International (formerly the Association of Official Analytical Chemists). AOCS Methods are recognized as Official Methods in US FDA activities and when litigation becomes necessary in industry trade. Additionally, the Technical Services function operates a Laboratory Proficiency Program (formerly the Smalley Check Sample Program) and oversees distribution and statistical analysis of 30 different series of basic laboratory quality assur-ance/quality control test samples. Certification as AOCS Approved Chemists, or as AOCS... 

Cancer is a type of neoplasm or tumor. While technically a tumor is defined as only a tissue swelling, it is now used as a synonym for a neoplasm. A neoplasm is an abnormal mass of tissue, the growth of which exceeds and is uncoordinated with the normal tissue, and persists after cessation of the stimuli which evoked it. There are two basic types of neoplasms, termed benign and malignant. The general characteristics of these tumors are defined in Table 24.1. Cancer is the common name for a malignant neoplasm. Neoplasms are composed of two main components ... 

---