Basic condition

The basic condition of the Standard application - the availability of stable coupled probabilistic or the multiple probabilistic relations between then controlled quality indexes and magnetic characteristics of steel. All the probabilistic estimates, used in the Standard, are applied at confidence level not less than 0,95. General requirements to the means of control and procedure of its performance are also stipulated. Engineers of standard development endeavoured take into consideration the existed practice of technical control performance and test at the enterprises that is why the preparation of object control for the performance of nondestructive test can be done during the process of ordinary acceptance test. It is suggested that every enterprise is operated in correspondence with direct and non-destructive tests, obtained exactly at it, for detailed process chart and definite product type, however the tests have long since been performed after development of the Standard displayed that process gives way to unification. 

Taft showed that LEER can also be established for aHphatic systems [8]. Taft compared the hydrolysis of substituted aliphatic methyl esters under basic conditions with the corresponding add-catalyzed reactions. 

As an example, experimental kinetic data on the hydrolysis of amides under basic conditions as well as under acid catalysis were correlated with quantitative data on charge distribution and the resonance effect [13]. Thus, the values on the free energy of activation, AG , for the acid catalyzed hydrolysis of amides could be modeled quite well by Eq. (5)... 

The Claisen condensation is initiated by deprotonation of an ester molecule by sodium ethanolate to give a carbanion that is stabilized, mostly by resonance, as an enolate. This carbanion makes a nucleophilic attack at the partially positively charged carbon atom of the e.ster group, leading to the formation of a C-C bond and the elimination ofan ethanolate ion, This Claisen condensation only proceeds in strongly basic conditions with a pH of about 14. 

Finally, in the last step, the chelating auxiliary had to be removed Ideally, one would like to convert 4.54 into ketone 4.55 via a retro Mannich reaction. Unfortunately, repeated attempts to accomplish this failed. These attempts included refluxing in aqueous ethanol under acidic and basic conditions and refluxing in a 1 1 acetone - water mixture in the presence of excess paraformaldehyde under acidic conditions, in order to trap any liberated diamine. Tliese procedures were repeated under neutral conditions in the presence of copper(II)nitrate, but without success. 

Torgov introduced an important variation of the Michael addition allylic alcohols are used as vinylogous a -synthons and 1,3-dioxo compounds as d -reagents (S.N. Ananchenko, 1962, 1963 H. Smith, 1964 C. Rufer) 1967). Mild reaction conditions have been successful in the addition of ],3-dioxo compounds to vinyl ketones. Potassium fluoride can act as weakly basic, non-nudeophilic catalyst in such Michael additions under essentially non-acidic and non-basic conditions (Y. Kitabara, 1964). 

Amines are powerful nucleophiles which react under neutral or slightly basic conditions with several electron-accepting carbon reagents. The reaction of alkyl halides with amines is useful for the preparation of tertiary amines or quaternary ammonium salts. The conversion of primary amines into secondary amines is usually not feasible since the secondary amine tends towards further alkylation. 

Carboxylic adds are obtained from aryl iodides by the reaction of chloroform under basic conditions without using CO[336],... 

Another method for the hydrogenoiysis of aryl bromides and iodides is to use MeONa[696], The removal of chlorine and bromine from benzene rings is possible with MeOH under basic conditions by use of dippp as a ligand[697]. The reduction is explained by the formation of the phenylpalladium methoxide 812, which undergoes elimination of /i-hydrogen to form benzene, and MeOH is oxidized to formaldehyde. Based on this mechanistic consideration, reaction of alcohols with aryl halides has another application. For example, cyclohex-anol (813) is oxidized smoothly to cyclohexanone with bromobenzene under basic conditions[698]. 

Allylation under basic conditions. Allylation can be carried out under basic conditions with allylic acetates and phosphates, and under neutral conditions with carbonates and vinyloxiranes. The allylations under neutral conditions are treated separately in Section 2.2.2.1 from those under basic conditions. However, in some cases, allylations of the same substrates are carried out under both basic and neutral conditions to give similar results. These reactions are treated together in this section for convenience. Allylic acetates are widely used for Pd-catalyzed allylation in the presence of bases tertiary amines or NaH are commonly used[6,7,4l]. As a base, basic alumina or ICF on alumina is conveniently used, because it is easy to remove by filtration after the reaction[42]. Allyl phosphates are more reactive than acetates. The allylation with 40 proceeds stepwise. At first allylic phosphate reacts with malonate and then allylic acetate reacts with amine to give 41(43]. 

Wylation under neutral conditions. Reactions which proceed under neutral conditions are highly desirable, Allylation with allylic acetates and phosphates is carried out under basic conditions. Almost no reaction of these allylic Compounds takes place in the absence of bases. The useful allylation under neutral conditions is possible with some allylic compounds. Among them, allylic carbonates 218 are the most reactive and their reactions proceed under neutral conditions[13,14,134], In the mechanism shown, the oxidative addition of the allyl carbonates 218 is followed by decarboxylation as an irreversible process to afford the 7r-allylpalladium alkoxide 219. and the generated alkoxide is sufficiently basic to pick up a proton from active methylene compounds, yielding 220. This in situ formation of the alkoxide. which is a... 

Oxindoles can be prepared from Af,p-acylphenylhydrazines by a reaction which is analogous to the Fischer cyclization. This is known as the Brunner reaction. The reaction is typically conducted under strongly basic conditions. For example, heating Af-phenylcyclopentanecarbonylhydrazide with CaO gives a 70% yield of spiro-cyclopentane oxindole[l]. 

Alkylation can also be accomplished with electrophilic alkenes. There is a dichotomy between basic and acidic conditions. Under basic conditions, where the indole anion is the reactive nucleophile, A-alkylation occurs. Under acidic conditions C-alkylation is observed. The reaction of indole with 4-vinylpyri-dine is an interesting illustration. Good yields of the 3-alkylation product are obtained in refluxing acetic acid[18] whereas if the reaction is done in ethanol containing sodium ethoxide 1-alkylation occurs[19]. Table 11.2 gives some examples of 3-alkylation using electrophilic alkenes. 

Mercury and tin in complexes (68 or 69) (Scheme 32 (154 mav behave as electrophilic centers (155. 156). Under basic conditions, the reactive species is an ambident anion (70) (Scheme 33). 

The formation of trisubstituted A-4 thiazoline-2-ones from the corresponding thiones analogs can be performed by oxidation with hydrogen peroxide under basic conditions. This reaction is strongly dependent on the pH of the medium. Higher yields are obtained in strongly alkaline solution (883). 

For example, 2-phenyl-5-fonnylthiazole treated with AgjO in water and dioxane under basic conditions gives 2-phenyI-5-thia201ecarboxylic acid (29). 

Usually no difficulties are encountered in the esterification of thiazole acids. Direct esterification with alcohol and add in the presence of an acid catalyst (7, 61, 62), or prior conversion to the add chloride (6, 63, 64) followed by reaction with an alcohol in basic conditions give good yields. 

As we ve just seen nucleophilic ring opening of ethylene oxide yields 2 substituted derivatives of ethanol Those reactions involved nucleophilic attack on the carbon of the ring under neutral or basic conditions Other nucleophilic ring openings of epoxides like wise give 2 substituted derivatives of ethanol but either involve an acid as a reactant or occur under conditions of acid catalysis... 

It looks as though all that is needed is to prepare the acetylenic anion then alkylate it with methyl iodide (Section 9 6) There is a complication however The carbonyl group m the starting alkyne will neither tolerate the strongly basic conditions required for anion formation nor survive m a solution containing carbanions Acetyhde ions add to carbonyl... 

Under basic conditions, Mn04 can be used as a titrant for the analysis of Mn +, with both the analyte and the titrant ending up as Mn02. fn the analysis of a mineral sample for... 

Furfural reacts with ketones to form strong, crosslinked resins of technical interest in the former Soviet Union the U.S. Air Force has also shown some interest (42,43). The so-called furfurylidene acetone monomer, a mixture of 2-furfurylidene methyl ketone [623-15-4] (1 )> bis-(2-furfurylidene) ketone [886-77-1] (14), mesityl oxide, and other oligomers, is obtained by condensation of furfural and acetone under basic conditions (44,45). Treatment of the "monomer" with an acidic catalyst leads initially to polymer of low molecular weight and ultimately to cross-linked, black, insoluble, heat-resistant resin (46). 

Phenolic Resins. Phenohc resins (qv) are formed by the reaction of phenol [108-95-2] C H O, and formaldehyde [50-00-0] CH2O. If basic conditions and an excess of formaldehyde are used, the result is a resole phenohc resin, which will cure by itself Hberating water. If an acid catalyst and an excess of phenol are used, the result is a novolac phenohc resin, which is not self-curing. Novolac phenohc resins are typically formulated to contain a curing agent which is most often a material known as hexamethylenetetraamine [100-97-0] C H22N4. Phenohc resin adhesives are found in film or solution... 

Chemical Properties. Under slightly acidic or basic conditions at room temperature, acetate and triacetate fibers are resistant to chlorine bleach at the concentrations normally used in laundering. 

Chemically, 2,2,2-trifluoroethanol behaves as a typical alcohol. It can be converted to trifluoroacetaldehyde [75-90-1] or trifluoroacetic acid [76-05-1] by various oxidi2iag agents such as aqueous chlorine solutions (51) or oxygen ia the preseace of a vanadium pentoxide catalyst (52). Under basic conditions, it adds to tetrafluoroethylene and acetylene to give, respectively, 1,1,2,2-tetrafluoroethyl 2/2/2 -trifluoroethyl ether [406-78-0] (53) and... 

The vinyl ether in the latter part of the equation is copolymetized with tetrafluoroethylene, and then the sulfonyl fluoride group is hydrolyzed under basic conditions in order to produce the ion-exchange membrane (44—46). 

PVDF-based microporous filters are in use at wineries, dairies, and electrocoating plants, as well as in water purification, biochemistry, and medical devices. Recently developed nanoselective filtration using PVDF membranes is 10 times more effective than conventional ultrafiltration (UF) for removing vimses from protein products of human or animal cell fermentations (218). PVDF protein-sequencing membranes are suitable for electroblotting procedures in protein research, or for analyzing the phosphoamino content in proteins under acidic and basic conditions or in solvents (219). 

Eor the purpose of quantitative analysis, formamide can be hydrolyzed under basic conditions to alkaU formate and ammonia that can be deterruined by conventional methods. 

Anionic Surfactants. In terms of general usage in cosmetic products, the anionics are by far the most widely used and are chiefly found in shampoo systems. They provide the formulator with the basic conditions for preparing these products, ie, foaming, cleansing, and solubiHty. 

Carbonyl deductions. The classical Wolff-Kishner reduction of ketones (qv) and aldehydes (qv) involves the intermediate formation of a hydrazone, which is then decomposed at high temperatures under basic conditions to give the methylene group, although sometimes alcohols may form (40). 

In general, hydroboration—protonolysis is a stereoselective noncatalytic method of cis-hydrogenation providing access to alkanes, alkenes, dienes, and enynes from olefinic and acetylenic precursors (108,212). Procedures for the protonolysis of alkenylboranes containing acid-sensitive functional groups under neutral or basic conditions have been developed (213,214). 

---