With cyclohexanone

Acetone in conjunction with benzene as a solvent is widely employed. With cyclohexanone as the hydrogen acceptor, coupled with toluene or xylene as solvent, the use of higher reaction temperatures is possible and consequently the reaction time is considerably reduced furthermore, the excess of cyclohexanone can be easily separated from the reaction product by steam distillation. At least 0 25 mol of alkoxide per mol of alcohol is used however, since an excess of alkoxide has no detrimental effect 1 to 3 mols of aluminium alkoxide is recommended, particularly as water, either present in the reagents or formed during secondary reactions, will remove an equivalent quantity of the reagent. In the oxidation of steroids 50-200 mols of acetone or 10-20 mols of cyclohexanone are generally employed. 

Furfuryl alcohol alone, or in combination with other cross-linkable binders such as phenoHc reins, chemical by-products and pitch, catalyzed with acid, gives carbon yields of 35—56%. Furfural together with cyclohexanone, pitch, or phenoHc resins gives, under acid catalysis, yields of 35—55% carbon under basic catalysis yields of 5—50% are achieved. FurfuryHdeneacetone resins (13 and 14), catalyzed by acid or base, give carbon yields of 48—56 and... 

The precautions usually observed when handling volatile solvents should be observed as a matter of course with cyclohexanone. These include adequate and proper ventilation, avoidance of prolonged breathing of vapor or contact of the Hquid with the skin, avoidance of internal consumption, and protection of the eyes against splashing Hquids. 

Mn Inhalation Teratology Study in Rats with Cyclohexanone, a study performed by Bio/dynamics, Inc., East Millstone, N.J., for The Industrial Health Foundation, Aug. 1984. 

The type of synthesis in which the two-atom fragment supplies C-5 + C-6 is uncommon but useful in preparing pyrimidine- and 5,6,7,8-tetrahydroquinazoline-2,4-diamines. Thus, dicyandiamide (S78) with benzyl methyl ketone (S77) yields 6-methyl-5-phenylpyrimidine-2,4-diamine (S79), or with acetophenone it yields 6-phenylpyrimidine-2,4-diamine (62JOC2708). Likewise, with cyclohexanone it yields the tetrahydroquinazolinediamine (SSO) and by using N- substituted dicyandiamides, 2- and/or 4-alkylamino groups may be introduced (65JOC1837). 

Formation of a 1,2-disubstituted hydrazine by acid hydrolysis of an appropriately substituted pyrazolidine has been noted (67HC(22)l), but the most interesting ring fission of pyrazolidines involves the N(l)—N(2) bond of 1-phenylpyrazolidines (421). If, instead of phenylhydrazone, compound (421) is used in the Fischer indole synthesis, N- aminopropylin-doles are formed (73T4045). Scheme 39 shows the reaction with cyclohexanone. 

A direct attack on the diazirine ring was observed only by use of almost concentrated sulfuric acid or strong Lewis acids, e.g. aluminum chloride in the case of (208). Some hydrazine was found together with cyclohexanone and cyclohexanol after decomposition of the spirodiazirine (189) with 80% sulfuric acid (B-67MI50800). 

This synthesis works especially well with cyclohexanone giving 80% oxaziridines with either chloramine (77JPR195) or (V-chloromethylamine. Simple aliphatic ketones and ortho substituted aromatic aldehydes yield 30-50% oxaziridines with N-chloromethylamine (65CB2516). 

The intermediacy of an aminal in the formation of enamines from ketones and secondary amines is not usually proposed. The only direct evidence for this is the infrared spectra of the reaction mixtures produced when dimethyl-or diethylamine was allowed to react with cyclohexanone or cyclopentanone... 

The only kinetic data reported are in a Ph.D. thesis (41). Integral order kinetics were usually not obtained for the reaction of a number of ketones with piperidine and a number of secondary amines with cyclohexanone. A few of the combinations studied (cyclopentanone plus piperidine, pyrrolidine, and 4-methylpiperidine, and N-methylpiperazine plus cyclohexanone) gave reactions which were close to first-order in each reactant. Relative rates were based on the time at which a 50% yield of water was evolved. For the cyclohexanone-piperidine system the half-time (txn) for the 3 1 ratio was 124 min and for the 1 3 ratio 121 min. It appears that an... 

Methyl vinyl sulfone forms 1,2-cycloaddition adducts with aldehydic enamines, both with and without 3 hydrogens (37). Simple alkylation was reported to take place when phenyl vinyl sulfone was allowed to react with cyclohexanone enamines (58,60), but it has recently been shown that phenyl vinyl sulfone also forms cyclobutane adducts (60a). 

Common reagents such as lithium diisopropylamide (LDA see Chapter 11, Problem 5) react with carbonyl compounds to yield lithium enolate salts and diisopropylamine, e.g., for reaction with cyclohexanone. 

A synthesis of an indolo[3,2-fl]carbazole (2) was reported in 1951—the first preparation of a compound belonging to this class (Scheme 13). This was accomplished commencing with cyclohexanone, via conversion to the bishydrazone 108, which underwent Fischer indolization in glacial acetic acid to furnish the octahy-dro derivative 109. After a final dehydrogenation step, the desired product 2 was obtained (51JCS809). 

Reaction of hydroxylamine-0-sulfonic acid with cyclohexanone in alkaline solution can be shown to give pentamethyleneoxazirane (16). Compound 16 is an isomer of cyclohexanone oxime. It decomposes even at room temperature and thus cannot be prepared in a pure state. 

A -Chloromethylamine attacks ketones in alkaline solution with formation of oxaziranes with cyclohexanone, compound 17 is produced in 50% yield. The reaction with aldehydes with zV-chloromethyl-amine yields predominantly acid amides. However, oxaziranes are also produced here as by-products. From benzaldehyde and A -chloro-methylamine, 2-raethyl-3-phenyloxazirane (15) was obtained in 10% yield. 

In an analogous sequence, reductive alkylation of aminoalcohol, 46, with cyclohexanone affords the secondary amine (47). Acylation with benzoyl chloride affords hexylcaine (48) in a reaction that may again involve acyl migration. 

Aldol condensation of the methoxymethyl ether of m-methoxybenzaldehyde (83) with cyclohexanone affords the conjugated ketone 84. Michael addition of dimethyl amine leads to the ami noketone Reduction of the ketone... 

Changing the functionality on the alicyclic ring from an amine to a carboxylic acid leads to a compound that shows antiallergic activity, acting possibly by means of inhibition of the release of allergic mediators. Thus, condensation of acylated indole with cyclohexanone carboxylic acid affords directly oxarbazole (29). ... 

Grignard reagents undergo a general and very useful reaction with ketones. Melhylmagnesium bromide, for example, reacts with cyclohexanone to yield a product with the formula C7HuO. What is the structure of this product if it has an IR absorption at 3400 cm-1 ... 

Triethyl phosphonoacetate, reaction of sodium derivative with cyclohexanone to yield ethyl cvclo hexy lideneacetate, 46, 45 1 nfluoroacetic anhydride, 46, 98 p,0 0 Trifluorostyrene, 47, 52 Trusopropvl phosphite as reagent in dechlorination of decachlorobi 2,4 cyclopentadienyl, 46, 93 1,3,5-Tnketones, from aroylationof 1,3-diketones, 46, 59 from 4-pyrones, 46, 59 Tnmethylamine oxide, reaction with x-octyl iodide to yield octanal, 47, 96... 

As observed with cyclohexanones, the diastereoselectivity of the addition reaction of trimeth-ylaluminum to 2-methylcyclopentanone depends on the stoichiometry of the reactants. Thus, addition of one equivalent of trimcthylaluminum proceeds via preferential tram attack whereas, due to the "compression effect , addition of an excess of the reagent leads to the formation of the equatorial alcohol via predominant attack from the cis side (Table 3)6. In contrast to the addition reactions with trimethylaluniinum, no reversal of the diastereoselectivity upon change of reagent stoichiometry was observed in the addition of triphenylaluminum to 2-methylcyclopentanone6. Even with an excess of the aluminum reagent trans attack predominates. However, the diastereoselectivity is lower than with the use of an equimolar amount of the reactants. 

Addition of BuLi to a 0.3 M solution of chloromethyl phenyl sulfoxide in THF at — 78 "C yields an immediate bright-yellow solution containing the lithio derivative which is stable for at least 2 h at —78 rC. Decomposition occurs rapidly above —20 C with the solution becoming turbid and the color changing to dark brown. Reaction of the lithiated solution of chloromethyl phenyl sulfoxide with cyclohexanone, acetone, or ben/ophenone for 10 min at —78 °C followed by 30 min at —20 rC yields one diastereomeT in 79, 75 and 68 % yields, respectively, after hydrolysis of the corresponding adducts. 

Monofekphthalic acid, 42, 77 Morpholine, condensation with cyclohexanone, 41, 65... 

Triazidochlorosilane ClSi(N3)3 708, which is readily prepared in situ by reaction of three equivalents of NaN3 with SiCU 57 in acetonitrile, reacts with acetophenone to give the tetrazoles 709 and 710 and with cyclohexanone to 6,7,8,9-tetrahy-dro-5H-tetrazolo[l,5-a]azepine 711, Si02, and HCl [210] (Scheme 5.70). 

On using Barton-oxidation procedures cyclohexane is oxidized by 1949, in the presence of FeCb and the Fe "-picolinate complex, to give cyclohexanone and cyclohexanol [166] whereas with FeCl2 1-chlorocyclohexane is the mayor product, with cyclohexanone and a small amount of cyclohexanol [167] (Scheme 12.47). 

Phenyl vinyl sulfones reacted with cyclohexanone enamines 332 to afford adducts which, upon hydrolysis, gave 2-(2-phenylsulfonyl)alkylcyclohexanone 333a . However, in the reaction with phenyl styryl sulfone, two products 333b and 334 were obtained by the nucleophilic attack at the and a-carbon atoms . Steric effects, electrostatic interactions between the nitrogen atom of the enamine and the oxygen atoms of the sulfone group, and medium effects contribute to the regioselectivity of the reaction. ... 

Since the amine by-product formation was essentially derived from the reaction of an enamine or a ketone with iodoaniline, the direct use of a ketone as the substrate instead of an amine, would also be expected to yield the indole (Scheme 4.21). Indeed, we were gratified to find that direct condensation of o-iodoaniline 24 (77, R, = H) with cyclohexanone (in the presence of 5mol% Pd(OAc)2 and 3 equiv DAB CO as a base at 0.3 M and 105 °C afforded the tetrahydrocarbazole 81a in 77% yield with no other major impurities (Figure 4.4) [5], The use of DMF as a solvent is crucial to the success of this reaction other solvents such as acetonitrile and toluene were ineffective. 

---