Shampoos ammonium lauryl sulfate

Anionic Walling and Dabney (1986) Sodium lauryl sulfate ammonium lauryl sulfate Shampoo NIR... [Pg.296]

Ammonium lauryl sulfate [2235-54-3] is available as an approximately 28% active, clear, Hquid form. It has greater solubiHty than the sodium salt and is more likely to be used in formulating clear shampoos. Systems using this detergent show their best stabiHty at pH between 6 and 7. Lower pH would tend to hydrolyze the detergent, eventually releasing ammonia. [Pg.449]

Ammonium lauryl sulfate is used in many shampoos, toothpastes, and skin cleansers. Unlike soap, it can be used in hard water. [Pg.200]

The most common ingredient in shampoos is also the most common detergent in use in other products a class of surfactants known as straight-chain alkyl benzene sulfonates. Examples are ammonium lauryl sulfate, its sodium relative, and the slightly larger but related molecule ammonium lauryl ether sulfate (sometimes abbreviated as ammonium laureth sulfate). [Pg.201]

Sodium and ammonium lauryl sulfate, sodium lauryl ethoxysulfate, and several shampoos containing these sulfates have been analyzed directly by Fourier transform IR spectroscopy (FTIR) with a special sample cell, called... [Pg.284]

Aqueous solution (28.5%) of ammonium lauryl sulfate Uses Primary active ingredient in shampoos and shower products. [Pg.17]

Shampoo bodywash Detergents Sodium lauryl sulfate, Cocamidopropyl betaine. Ammonium lauryl sulfate, Cocamide DEA, Cocamide MEIA Skin irritation. Can promote the formation of cancer-causing substances known as nitrosamines in products during storage. Also found in bubble bath and liquid hand soaps. [Pg.85]

The principle primary surfactant used in the United States for shampoos is ammonium lauryl sulfate however, in many other countries, sodium or ammonium laureth sulfate (with an average of 2 or 3 moles of ethylene oxide) is the current leader. These two surfactants are used alone or blended together for shampoos because of their fine ability to clean sebaceous soil... [Pg.199]

Calcium-bridged fatty acid may be deposited onto hair even in shampoos containing anionic surfactant such as ammonium lauryl sulfate. It is also well known that acid rinses may be used to remove calcium-bridged fatty acid from hair, and anionic sulfate surfactants appear to remove fatty acid deposits from hair. However, copper (cupric ion) adsorbs strongly to hair and is reported to be resistant to removal by anionic surfactant [11]. [Pg.220]

Shampoo 11 21% ammonium lauryl sulfate,4% cocamide DEA,2% 20-40 alcohols,2% dime-thicone, colors, preservative, and fragrance. [Pg.303]

Shampoo III 10% ammonium lauryl sulfate, 3% cocamide DEA,2% cocamidopropylbetaine,... [Pg.303]

Sodium cocoyl isethionate TEA-lauryl sulfate foam builder, bubble baths cosmetics Disodium oleamido MIPA-sulfosuccinate foam builder, bubble baths personal care Disodium oleamido MIPA-sulfosuccinate foam builder, car wash compounds TEA-dodecylbenzenesulfonate foam builder, car washes Sodium nonoxynol-4 sulfate foam builder, carbonated beverages Quillaja (Quillaja saponaria) foam builder, carpet cleaners Disodium lauryl sulfosuccinate foam builder, carpet shampoo Ammonium lauryl sulfate foam builder, carpet/upholstery cleaners Disodium myristamido MEA-sulfosuccinate foam builder, carpetbacking C12-14 alkyl dimethyl betaine Disodium cocoyl sulfosuccinamate Disodium N-oleyl sulfosuccinamate... [Pg.5302]

Ammonium decyl sulfate Ammonium lauryl sulfate Cocamidopropylamine oxide Cocodimethylammonium-3-sulfopropylbetaine Cocoyl sarcosine C10-12 pareth-5 C12-14 pareth-9 C12-16 pareth-1 C12-16 pareth-2 C12-16 pareth-3 C12-16 pareth-5 C12-16 pareth-6 C12-16 pareth-7 C12-16 pareth-8 C12-16 pareth-11 DEA-lauryl sulfate Disodium deceth-6 sulfosuccinate Disodium myristamido MEA-sulfosuccinate lsodeceth-6 Lauramidopropyl PEG-dimonium chloride phosphate Lauroampho PEG-glycinate phosphate Magnesium lauryl sulfate Myristoyl sarcosine Sodium cocoamphoacetate Sodium cocoyl sarcosinate Sodium Cl2-15 pareth sulfate Sodium diisopropyl naphthalene sulfonate Sodium myristyl sulfate Sodium trideceth sulfate Stearoyl sarcosine TEA-lauryl sulfate Trideceth-10 foam builder, thickeners N,N-Dimethyl-N-lauric acid-amidopropyl-N-(3-sulfopropyl)-ammonium betaine N,N-Dimethyl-N-myristyl-N-(3-sulfopropyl)-ammonium betaine N,N-Dimethyl-N-palmityl-N-(3-sulfopropyl)-ammonium betaine N,N-Dimethyl-N-stearyl-N-(3-sulfopropyl)-ammonium betaine N,N-Dimethyl-N-tallow-N-(3-sulfopropyl)-ammonium betaine N,N-Distearyl-N-methyl-N-(3-sulfopropyl)-ammonium betaine foam builder, toothpaste Magnesium lauryl sulfate TEA-lauryl sulfate foam builder, topical cleansers Trideceth-7 carboxylic acid foam builder, upholstery shampoo DEA-lauryl sulfate Magnesium lauryl sulfate Sodium caproamphoacetate Sodium cocoamphoacetate TEA-lauryl sulfate... [Pg.5310]

Shampoo compositions generally comprise one or more anionic cleansing surfactants, which are cosmetically acceptable and suitable for topical application to hair. Anionic surfactants (negatively charged molecules) provide a lot of lather and detergency in the shampoo. The most commonly used anionic surfactants are sodium lauryl ether sulfate (SLES), ammonium lauryl sulfate (ALS), and ammonium lauryl ether sulfate (ALES), and sodium lauryl sulfate is also occasionally used. [Pg.154]

Suave Originals Salon Formula Shampoo Daily Cocodiethanolamide Cocamidopropyl betaine Ammonium lauryl sulfate... [Pg.167]

Shampoo Hydrating Curls Ammonium lauryl sulfate... [Pg.167]

Chem. Descrip. Ammonium lauryl sulfate, ammonium laureth sulfate, glycol distearate, and ammonium xylene sulfonate Uses Surfactant cone, in shampoos, hand soap, body washes, etc,... [Pg.293]

Uses Surfactant, foaming agent, vise, builder for acid-type shampoos, bath prods., skin cleaners, high-foaming acid cleaners, liq. hand soaps, cosmetics Features Mild primary surfactant high-foaming exc. flash foam in hard and soft water replaces ammonium lauryl sulfate in cosmetic applies, where mildness is req. [Pg.326]

Uses Emulsifier in shampoos and cream rinses and leave-in conditioners Features Monoalkyl amidoamine quat. more polar than most quats due to presence of hydroxy group, giving material water dispersibility and compat. with anionics exceptionally mild due to sat. C22 long chain Properties Off-wh. soft solid mild fatty char, odor water-disp. sol. in SD40 alcohol, ammonium lauryl sulfate, triethanolamine lauryl sulfate, propylene glycol insol. in min. oil and almond oil pH 6.0-7.5 (5%) 50-55% act. [Pg.578]

Dehypon Cone. Rhodasurf LA-790 dispersant, carpet shampoos Ammonium lauryl sulfate dispersant, carpet/upholstery cleaners... [Pg.2607]

The most widely used alkyl sulfate in shampoo preparation is lauryl sulfate. The alkyl component of this sulfate ranges from C-10 to C-18 with a predominance of the C-12 (lauryl) component. By distillation of the fatty alcohol, certain cuts can be obtained which offer the best effects in foaming, cleansing, and rinsing properties for the alkyl sulfate preparation. The range which appears to be most desirable is between C-12 and C-16. Lauryl sulfate detergents are available in various salt forms with the sodium, ammonium, and triethanolamine types being used most frequently in shampoos. [Pg.449]

Sodium chloride (table salt) is used to thicken the mixture if the main surfactants are sodium lauryl sulfates. If the surfactants are ammonium-based, then ammonium chloride is used instead. Salt can make the shampoo harsh, which can sting the eyes, so more expensive thickeners are used to keep the salt levels low. [Pg.202]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...