Acid Glass Cleaner

Consumer Acid Glass Cleaner Acid Anionic Non-Streaking Glass Cleaner 

Charge under agitation most of the water, the 2-butoxyethanol, and the Avanel S-70 into the mixing vessel. In a separate vessel, under agitation, dissolve the dye in the balance of the water. Add the dye solution to the batch. Adjust pH to 3.5-4.0 with Acetic Acid. 

This formulation is particularly effective at removing oil, greases and other atmospheric contaminants from glass surfaces. 

On prolonged storage, glycol ethers have been shown to form peroxy compounds which can adversely affect the dyes normally used in glass cleaners. Dyes should be thoroughly screened for shelf stability in the finished product prior to adoption into the finished formulation. 

---

Ammonia is a pungent gas at room temperature. Its main use is in the production of fertilizers and explosives. It is very soluble in water. It forms a basic solution that is used in common products, such as glass cleaners. Identify the conjugate acid-base pairs in the reaction between aqueous ammonia and water. 

Early chemists called any compound that tasted sour an acid (from acidus, Latin for sour ). Some familiar acids are citric acid (found in lemons and other citms fmits), acetic acid (found in vinegar), and hydrochloric acid (found in stomach acid— the sour taste associated with vomiting). Compounds that neutralize acids, such as wood ashes and other plant ashes, were called bases, or alkaline compounds ( ash in Arabic is al kalai). Glass cleaners and solutions designed to unclog drains are alkaline solutions. 

With regard to household products, the application of sulfosuccinic acid dialkyl esters is restricted to specific glass cleaners, for example, spectacle lenses or windscreens as well as carpet shampoos. 

Compounds that neutralize acids, thereby destroying their acidic properties, were called bases, or alkaline compounds. Glass cleaners and solutions designed to unclog drains are familiar alkaline solutions. 

One of the most diverse consumer and industrial product categories is hard-surface cleaning. These products can contain from <1% surfactant, as found in glass cleaners, to > 70% surfactants, as found in some concentrated industrial cleaners. They can be highly acidic toilet bowl cleaners or highly alkaline floor wax strippers. Unlike dishwash and laundry products, surfactants may not be the majority of the composition. They are certainly key ingredients. While some work has been published on the use of SMEs in hard-surface cleaners, no references on use of sulfonated fatty acids in hard surface were found. 

Uses Detergent, wetting agent for rinse aids, acid cleaners, glass cleaners, alkaline metal degreasers Features Low foaming Properties Liq. cloud pt. 30 C 100% cone. 

Uses Hydrotrope, solubilizer, and detergent for hand dishwashing liqs., fine fabric liqs., metal cleaners, glass cleaners, concrete wall cleaners Features Compat. with cone, eledrolyte sol ns., strong alkaline medium, and acidic sol ns. no cloud pt. so its surf, props, not affected by high temps. stable foaming props. 

Boron phosphate is used as an acid catalyst for dehydration of alcohols to olefins isomemization of olefins nitration of aromatic hydrocarbons polymerization of aldehydes and other synthetic reactions. It also is used as a flux in silica-based porcelain and ceramics special glasses and acid cleaners. 

Phosphoric acid is used as an intermediate in the production of animal feed supplements, water treatment chemicals, metal surface treatments, etching agent, and personal care products such as toothpaste. It is used as a catalyst in the petroleum and polymer industry. Phosphoric acid is used in food as a preservative, an acidulant, and flavor enhancer it acidifies carbonated drinks such as Coca Cola and Pepsi, giving them a tangy flavor. Phosphoric acid is used as a rust remover and metal cleaner. Naval Jelly is approximately 25% phosphoric acid. Other uses for phosphoric acid include opacity control in glass production, textile dyeing, rubber latex coagulation, and dental cements. 

Third-degree burns can occur if skin comes into contact for more than 4 s with water that is hotter than 60°C (140°F). Suppose someone accidentally poured hydrochloric acid into a glass-disposal container that already contained the drain cleaner NaOH and the container shattered. The solution in the container was approximately 55 g of NaOH and 450 mL of hydrochloric acid solution containing 1.35 mol of HCl (a 3.0 M HCl solution). K the initial temperature of the solutions was 25 °C, could a mixture hot enough to cause burns have resulted ... 

Use Special glasses, ceramics, acid cleaner, dehydration catalyst. 

---