Acetone properties

Solvent X Acetone Properties of solvent pairs 315 UNI FAC contributions CH3 1 CH3CO 1 ... 

Physical properties. Above members all colourless. Acetone, CH3COCH3, b.p. 56 soluble in water, characteristic odour. Ethyl methyl ketone, b.p. 80°, and diethyl ketone, b.p. 102 , are moderately and sparingly soluble in water respectively. Acetophenone,C6H5COCH3, m.p. 20, sparingly soluble, and benzophenone, m.p.48 ,... 

Pinacol possesses the unusual property of forming a crystalline hexahydrate, m.p. 45°, and the pinacol is separated in this form from the unreacted acetone and the tsopropyl alcohol. The magnciaium is conveniently amalgamated by dissolving mercuric chloride in a portion of the acetone mercury is then liberated by the reaction ... 

The ability of various selenium heterocycles to check the loss of orthophosphate caused by irradiation of ATP has been studied by Brucker and Bulka (92). They found that only 2-amino-4,5-dimethyiselenazole shows radioprotective properties, while other 2-aminoselenazoles, selenosemicarbazides, and acetone selenosemicar-bazones possess no such activity but are in addition very sensitive to radiation (93). 

Furfural—acetone resins have been used to form resin-aggregate mixtures referred to as organic concretes. Despite the reportedly excellent properties, there has been virtually no commercial use of such resins outside the former Soviet Union. The stmctures and polymerization mechanisms of these furfural—aldehyde—ketone polymers are discussed in a review (6). 

Physical Properties. Furfuryl alcohol (2-furanmethanol) [98-00-0] is aHquid, colorless, primary alcohol with a mild odor. On exposure to air, it gradually darkens in color. Furfuryl alcohol is completely miscible with water, alcohol, ether, acetone, and ethyl acetate, and most other organic solvents with the exception of paraffinic hydrocarbons. It is an exceUent, highly polar solvent, and dissolves many resins. 

Ben2onitri1e [100-47-0] C H CN, is a colorless Hquid with a characteristic almondlike odor. Its physical properties are Hsted in Table 10. It is miscible with acetone, ben2ene, chloroform, ethyl acetate, ethylene chloride, and other common organic solvents but is immiscible with water at ambient temperatures and soluble to ca 1 wt% at 100°C. It distills at atmospheric pressure without decomposition, but slowly discolors in the presence of light. 

Chloroacetyl chloride [79-04-9] (CICH2COCI) is the corresponding acid chloride of chloroacetic acid (see Acetyl chloride). Physical properties include mol wt 112.94, C2H2CI2O, mp —21.8 C, bp 106°C, vapor pressure 3.3 kPa (25 mm Hg) at 25°C, 12 kPa (90 mm Hg) at 50°C, and density 1.4202 g/mL and refractive index 1.4530, both at 20°C. Chloroacetyl chloride has a sharp, pungent, irritating odor. It is miscible with acetone and bensene and is initially insoluble in water. A slow reaction at the water—chloroactyl chloride interface, however, produces chloroacetic acid. When sufficient acid is formed to solubilize the two phases, a violent reaction forming chloroacetic acid and HCl occurs. 

Containers less than bulk must bear the red diamond-shaped "FLAMMABLE LIQUID" label. Bulk containers must display the red "FLAMMABLE" placard in association with the UN1090 identification. Fire is the main ha2ard in emergencies resulting from spills. Some manufacturers provide transportation emergency response information. A listing of properties and ha2ard response information for acetone is pubHshed by the U.S. 

Physical properties are Hsted in Table 2. Butenediol is very soluble in water, lower alcohols, and acetone. It is nearly insoluble in aUphatic or aromatic hydrocarbons. 

Acrolein is a highly toxic material with extreme lacrimatory properties. At room temperature acrolein is a Hquid with volatiUty and flammabiUty somewhat similar to acetone but unlike acetone, its solubiUty in water is limited. Commercially, acrolein is always stored with hydroquinone and acetic acid as inhibitors. Special care in handling is required because of the flammabiUty, reactivity, and toxicity of acrolein. 

Polyesters. Polyesters containing carbonate groups have been prepared from this diol (see Polycarbonates) (99). Films of this polymer, formed from an acetone or ethyl acetate solution, exhibit exceUent adhesive properties. 

Isoprene [78-79-5] (2-methyl-1,3-butadiene) is a colorless, volatile Hquid that is soluble in most hydrocarbons but is practically insoluble in water. Isoprene forms binary azeotropes with water, methanol, methylamine, acetonitrile, methyl formate, bromoethane, ethyl alcohol, methyl sulfide, acetone, propylene oxide, ethyl formate, isopropyl nitrate, methyla1 (dimethoxymethane), ethyl ether, and / -pentane. Ternary azeotropes form with water—acetone, water—acetonitrile, and methyl formate—ethyl bromide (8). Typical properties of isoprene are Hsted in Table 1. 

The physical properties of some common ketones are Hsted in Table 1. Ketones are commonly separated by fractional distillation, and vapor—Hquid equihbria and vapor pressure data are readily available for common ketones. A number of other temperature dependent physical properties for acetone, methyl ethyl ketone, methyl isobutyl ketone, and diethyl ketone have been pubHshed (3). 

Health and Safety Factors. MEK is slightly more toxic than acetone, but is not considered highly toxic, and nor does it exhibit cumulative toxicological properties. The OSHA time weighted average iu air is 200 ppm other measured toxicity values are shown iu Table 3. Methyl ethyl ketone is highly flammable. 

Isophorone. Isophorone (3,5,5-trimethyl-2-cyclohexen-l-one) is a cycHc a,P-unsaturated ketone derived from the trimeri2ation of acetone. It has a light yellow color and a disagreeable camphoraceous odor. It has the tendency to discolor and form residues on prolonged storage. Isophorone is completely miscible with organic solvents, and other physical properties are Hsted ia Table 1. 

Lead Fluoride. Lead difluoiide, Pbp2, is a white oithorhombic salt to about 220°C where it is transformed into the cubic form some physical properties ate given in Table 1. Lead fluoride is soluble in nitric acid and insoluble in acetone and ammonia. It is formed by the action of hydrofluoric acid on lead hydroxide or carbonate, or by the reaction between potassium fluoride and lead nitrate. 

Solution Properties. Lignin in wood behaves as an insoluble, three-dimensional network. Isolated lignins (milled wood, kraft, or organosolv lignins) exhibit maximum solubiUty in solvents having a Hildebrand s solubiUty parameter, 5, of 20.5 — 22.5(J/cm ) (10 — ll(cal/cm ) > and A// in excess of 0.14 micrometer where A]1 is the infrared shift in the O—D bond when the solvents are mixed with CH OD. Solvents meeting these requirements include dioxane, acetone, methyl ceUosolve, pyridine, and dimethyl sulfoxide. 

The selectivity of pervaporation membranes varies considerably and has a critical effect on the overall separation obtained. The range of results that can be obtained for the same solutions and different membranes is illustrated in Figure 41 for the separation of acetone from water using two types of membrane (89). The figure shows the concentration of acetone in the permeate as a function of the concentration in the feed. The two membranes shown have dramatically different properties. The siUcone mbber membrane removes acetone selectively, whereas the cross-linked poly(vinyl alcohol) (PVA) membrane removes water selectively. This difference occurs because siUcone mbber is hydrophobic and mbbery, thus permeates the acetone preferentially. PVA, on the other hand, is hydrophilic and glassy, thus permeates the small hydrophilic water molecules preferentially. 

Selected physical properties of various methacrylate esters, amides, and derivatives are given in Tables 1—4. Tables 3 and 4 describe more commercially available methacrylic acid derivatives. A2eotrope data for MMA are shown in Table 5 (8). The solubiUty of MMA in water at 25°C is 1.5%. Water solubiUty of longer alkyl methacrylates ranges from slight to insoluble. Some functionalized esters such as 2-dimethylaniinoethyl methacrylate are miscible and/or hydrolyze. The solubiUty of 2-hydroxypropyl methacrylate in water at 25°C is 13%. Vapor—Hquid equiUbrium (VLE) data have been pubHshed on methanol, methyl methacrylate, and methacrylic acid pairs (9), as have solubiUty data for this ternary system (10). VLE data are also available for methyl methacrylate, methacrylic acid, methyl a-hydroxyisobutyrate, methanol, and water, which are the critical components obtained in the commercially important acetone cyanohydrin route to methyl methacrylate (11). 

Nitrotoluene [99-99-0] crystallizes in colorless rhombic crystals. It is only slightly soluble in water, 0.044 g/100 g of water at 30°C moderately soluble in methanol and ethanol and readily soluble in acetone, diethyl ether, and benzene. The physical properties of -nitrotoluene are Hsted in Table 11. 

Structure and Crystallinity. The mechanical—optical properties of polycarbonates are those common to amorphous polymers. The polymer may be crystallized to some degree by prolonged heating at elevated temperature (8 d at 180°C) (16), or by immersion ia acetone (qv). Powdered amorphous powder appears to dissolve partially ia acetone, initially becoming sticky, then hardening and becoming much less soluble as it crystallizes. Enhanced crystallization of polycarbonate can also be caused by the presence of sodium phenoxide end groups (17). 

Physical properties of isopropyl alcohol are characteristic of polar compounds because of the presence of the polar hydroxyl, —OH, group. Isopropyl alcohol is completely miscible ia water and readily soluble ia a number of common organic solvents such as acids, esters, and ketones. It has solubiUty properties similar to those of ethyl alcohol (qv). There is a competition between these two products for many solvent appHcations. Isopropyl alcohol has a slight, pleasant odor resembling a mixture of ethyl alcohol and acetone, but unlike ethyl alcohol, isopropyl alcohol has a bitter, unpotable taste. 

Chemical properties of isopropyl alcohol are determined by its functional hydroxyl group in the secondary position. Except for the production of acetone, most isopropyl alcohol chemistry involves the introduction of the isopropyl or isopropoxy group into other organic molecules by the breaking of the C—OH or the O—H bond in the isopropyl alcohol molecule. 

Sodium iodide crystallizes ia the cubic system. Physical properties are given ia Table 1 (1). Sodium iodide is soluble ia methanol, ethanol, acetone, glycerol, and several other organic solvents. SolubiUty ia water is given ia Table 2. 

---