Acetal synthesis

The autotropic pathway for acetate synthesis among the acetogenic bacteria has been examined (67). Quantitative fermentation of one mole of glucose [50-99-7] yields three moles of acetic acid, while two moles of xylose [58-86-6] C H qO, yields five moles. The glucose reaction is... 

Acidic Cation-Exchange Resins. Brmnsted acid catalytic activity is responsible for the successful use of acidic cation-exchange resins, which are also soHd acids. Cation-exchange catalysts are used in esterification, acetal synthesis, ester alcoholysis, acetal alcoholysis, alcohol dehydration, ester hydrolysis, and sucrose inversion. The soHd acid type permits simplified procedures when high boiling and viscous compounds are involved because the catalyst can be separated from the products by simple filtration. Unsaturated acids and alcohols that can polymerise in the presence of proton acids can thus be esterified directiy and without polymerisation. 

The poly(vinyl alcohol) made for commercial acetalization processes is atactic and a mixture of cis- and /n j -l,3-dioxane stereoisomers is formed during acetalization. The precise cis/trans ratio depends strongly on process kinetics (16,17) and small quantities of other system components (23). During formylation of poly(vinyl alcohol), for example, i j -acetalization is more rapid than /ra/ j -acetalization (24). In addition, the rate of hydrolysis of the trans-2iQ. -A is faster than for the <7 -acetal (25). Because hydrolysis competes with acetalization during acetal synthesis, a high cis/trans ratio is favored. The stereochemistry of PVF and PVB resins has been studied by proton and carbon nmr spectroscopy (26—29). 

The chemical inertness of the three-membered ring permitted many conversions of functional groups in diazirines. Esterifications, cleavage of esters and acetals, synthesis of acid chlorides, oxidation of hydroxy groups to carboxyl groups as well as Hofmann alkenation all left the three-membered ring intact (79AHC(24)63). 

The third reason for favoring a non-radical pathway is based on studies of a mutant version of the CFeSP. This mutant was generated by changing a cysteine residue to an alanine, which converts the 4Fe-4S cluster of the CFeSP into a 3Fe-4S cluster (14). This mutation causes the redox potential of the 3Fe-4S cluster to increase by about 500 mV. The mutant is incapable of coupling the reduction of the cobalt center to the oxidation of CO by CODH. Correspondingly, it is unable to participate in acetate synthesis from CH3-H4 folate, CO, and CoA unless chemical reductants are present. If mechanism 3 (discussed earlier) is correct, then the methyl transfer from the methylated corrinoid protein to CODH should be crippled. However, this reaction occurred at equal rates with the wild-type protein and the CFeSP variant. We feel that this result rules out the possibility of a radical methyl transfer mechanics and offers strong support for mechanism 1. 

Table 3.1 Measuring the environmental efficiency of butyl acetate synthesis...

Jautze S, Peters R (2010) Catalytic asymmetric Michael additions of a-cyano acetates. Synthesis 365-388... 

Discovering the Role of Au and KOAc in the Catalysis of Vinyl Acetate Synthesis... 

The chemistry of vinyl acetate synthesis from the gas-phase oxidative coupling of acetic acid with ethylene has been shown to be facilitated by many co-catalysts. Since the inception of the ethylene-based homogeneous liquid-phase process by Moiseev et al. (1960), the active c ytic species in both the liquid and gas-phase process has always been seen to be some form of palladium acetate [Nakamura et al, 1971 Augustine and Blitz, 1993]. Many co-catalysts which help to enhance the productivity or selectivity of the catalyst have appeared in the literature over the years. The most notable promoters being gold (Au) [Sennewald et al., 1971 Bissot, 1977], cadmium acetate (Cd(OAc)j) [Hoechst, 1967], and potassium acetate (KOAc) [Sennewald et al., 1971 Bissot, 1977]. 

In order to probe the influence of Au and KOAc on the vinyl acetate synthesis chemistry, four different catalysts were synthesized. All of these catalysts were prepared in a manner exemplified in prior patent technology [Bissot, 1977], and each contained the same palladium loading in an egg-shell layer on the surface of a spherical silica support. The palladium content in the catalyst was easily controlled by adjusting the solution strength of palladium chloride (PdClj) added to the porous silica beads prior to its precipitation onto the support by reaction with sodium metasilicate (Na SiOj). The other two catalyst components (Au and KOAc) were either present or absent in order to complete the independent evaluation of their effect on the process chemistry, e.g., (1) Pd-i-Au-hKOAc, (2) Pd-i-KOAc, (3) Pd-hAu, and (4) Pd only. 

The effect of the catalyst composition upon the catalyst activity, selectivity, and reaction pathways was examined using a conventional high pressure fixed reactor and a TAP reactor. Particular emphasis was placed upon the effect of Au and KOAc on the acceleration or impedance of the pathways associated with vinyl acetate synthesis. A summary of the key findings is given below ... 

Ketene acetal synthesis by /1-elimination of haloacids from halogenated acetals under well controlled conditions using thermal activation (A), ultrasound (US) or micro-wave irradiation [92] (MW) has been described. From a mechanistic point of view, as the TS is more charge delocalized than the GS and the polarity is enhanced during the course of the reaction, a favorable microwave effect can therefore be observed (Eqs. (37) and (38) and Scheme 3.13). 

Kudzin, Z.H., Phosphocysteine derivatives thioureidoalkanephosphonates via acetals, Synthesis, 643, 1981. 

Ljungdahl LG. 1986. The autotrophic pathway of acetate synthesis in acetogenic bacteria. Annu Rev Microbiol 40 415-50. 

Cyclic acetals are useful and common protecting groups for aldehydes and ketones, especially during the course of a total synthesis [8]. The successful synthesis of acetals frequently relies on the removal of water, a by-product of the reaction between the carbonyl compound and the corresponding diol. A Dean-Stark trap is often used for the removal of water as an azeotrope with benzene, but this method is not suitable for small-scale reactions. In addition, the highly carcinogenic nature of benzene makes it an undesirable solvent. Many of the reported catalysts for acetal synthesis such as p-toluenesulfonic acid and boron trifluoride etherate are toxic and corrosive. 

Coppola GM (1984) Amberlyst-15, a superior acid catalyst for the cleavage of acetal. Synthesis 1021-1023... 

Todoroki, T., Saito, A., and Tanaka, A., Lipase-catalyzed kinetic resolution of ( )-cw-flavan-4-ol and its acetate synthesis of chiral 3-hydroxyflavanones, Bioscl Biotechnol Biochem., 66, 1172, 2002. 

Deacetoxyalcyonin acetate synthesis 76 Dendrobatid alkaloid 25 IF synthesis 112, 168... 

---