A-platforms

As in the construction industry, piling of the conductor is done by dropping weights onto the pipe or using a hydraulic hammer until no further penetration occurs. In an offshore environment the conductor is either piled (e.g. on a platform) or a large diameter hole is actually drilled, into which the conductor is lowered and cemented. Once the drill bit has drilled below the conductor the well is said to have been spudded. 

One of the main surface equipment items typically required for gas fields is compression, which is installed to allow a low reservoir pressure to be attained. Gas compression takes up a large space and is expensive. If gas compression is not initially required on a platform, then its installation is usually delayed until it becomes necessary. This reduces the initial capital investment and capital exposure. Figure 8.12 indicates when gas compression is typically installed ... 

Bench scales are small and light enough to be placed on a bench or table. They generally have a platform on which small quantities can be placed by hand. Alternatively, some have a roUer conveyor platform on which the item is moved across the scale. Capacities range from 5 kg to 250 kg. 

Portable scales generally have a platform near the floor with the indicator mounted on a column for ease of operation. These scales may be on wheels, and many are battery-powered. Capacities are generally less than 600 kg. Bench scales can be placed on a wheeled table for similar use. 

Process industries frequently need to weigh and control the flow rate of bulk material for optimum performance of such devices as grinders or pulverizers, or for controlling additives, eg, to water suppHes. A scale can be installed in a belt conveyor, or a short belt feeder can be mounted on a platform scale. Either can be equipped with controls to maintain the feed rate within limits by controlling the operation of the device feeding the material to the conveyor. Direct mass measurement with a nuclear scale can also be used to measure and control such a continuous stream of material. 

As illustrated in Figure 4, the model is created on a platform submerged in a bath that is mounted on a turntable and contains a suitable monomer including a photoinitiator responsive to a laser line. The laser is modulated by the design computer and scaimed radially while the turntable rotates to write... 

When the furnace is tilted toward the charging floor, which is on a platform above ground level, soHd scrap is dumped by an overhead crane into the mouth of the furnace. Scrap can form up to 30% of the charge unless it is preheated, when up to 45% may be used. The crane then moves away from the furnace and another crane carries a transfer ladle of molten pig iron to the furnace and pours the molten pig iron on top of the scrap. 

Personal Computer Controller Because of its high performance at low cost and its unexcelled ease of use, apphcation of the personal computer (PC) as a platform for process controllers is growing. When configured to perform scan, control, alarm, and data acquisition (SCADA) functions and combined with a spreadsheet or database management apphcation, the PC controller can be a low-cost, basic alternative to the DCS or PLC. 

Fiber drums are also made with a removable fiber top and a fiber bottom that is either removable or permanently fastened to the body. This drrtm has limited reuse, brrt it costs less than the lever-locked metal-top type. Filling equipment consists most commonly of an operator-controlled spout connected to a supply bin resting on a platform scale. Table 21-26 shows the labor productivity of several systems. 

Plant Type. The determination to have an aero-derivative type gas turbine or a frame-type gas turbine is the plant location. In most cases if the plant is located off-shore on a platform then an aero-derivative plant is required. On most on-shore applications, if the size of the plant exceeds 100 MW then the frame type is best suited for the gas turbine. In smaller plants between 2-20 MW, the industrial type small turbines best suit the application, and in plants between 20-100 MW, both aero-derivative or frame types can apply. Aero-derivatives have lower maintenance and have high heat-recovery capabilities. In many cases, the type of fuel and service facilities may be the determination. Natural gas or diesel no. 2 would be suited for aero-derivative gas turbines, but heavy fuels would require a frame type gas turbine. 

Note that the wetted surface A used to calculate heat absoiption for a practical fire situation is normally taken to be the total wetted surface within 7.5 m of grade. "Grade" usually refers to ground level, but any other level at which a major fire could be sustained, such as a platform, should also be considered. In the case of vessels containing a variable level of liquid, the average level is considered. Specific inteipretations of A to be used for various vessels are as... 

Inherently safer principles also apply to mechanical integrity requirements. Design plant modifications for ease and reduced risk in inspections, code compliance, and maintenance. For example, if one can check the pipe thickness from a platform, it is more likely to be done than if a crane is required. 

In Figure 9-11 two workers in level D proteetion are pietured overseeing work aetivity on a platform. One appears to be a supervisor, the other a worker. Both are wearing level D, but the whole body proteetion and hand and head proteetion are different. 

A platform was being constructed from one storage tank to another, without the workers knowing that mixture of benzoic acid and air in the open storage tank could explode. DSM is the largest European producer of benzoic acid which is used in a range of applications from a pla.sttcizcf to food preservative. DSM s capacity here is 440 million lb per year. 

Work platform A platform provided around a plant item for safe maintenance of the unit. 

Pipe lean The angle between the vertical and a typical stand of pipie with the setback. Racking platform A platform located at a distance above the working floor for laterally supporting the upper end of racked pipe. 

Rod board A platform located at a distance above the working floor for supporting rods. 

A Mac version of StarLogo (as well as a platform-independent StarLogo written in Java) can be downloaded from http // starlogo.www.media.mit.edu/ people/ star logo/. 

The versatility of poly(phenylcne) chemistry can also be seen in that it constitutes a platform for the design of other conjugated polymers with aromatic building blocks. Thus, one can proceed from 1,4- to 1,3-, and 1,2-phenylene compounds, and the benzene block can also be replaced by other aromatic cores such as naphthalene or anthracene, helerocyclcs such as thiophene or pyridine as well as by their substituted or bridged derivatives. Conceptually, poly(pheny ene)s can also be regarded as the parent structure of a series of related polymers which arc obtained not by linking the phenylene units directly, but by incorporation of other conjugated, e.g. olefinic or acetylenic, moieties. 

The radical-based functionalization of silicon surfaces is a growing area because of the potential practical applications. Although further knowledge is needed, the scope, limitations, and mechanism of these reachons are sufficiently well understood that they can be used predictably and reliably in the modification of hydrogen-terminated silicon surfaces. The radical chemistry of (TMSlsSiH has frequently served as a model in reactions of both hydrogen-terminated porous and flat silicon surfaces. We trust that the survey presented here will serve as a platform to expand silicon radical chemistry with new and exciting discoveries. 

The (pentamethylcyclopentadienyl)zirconium amidinate unit also served as a platform for the synthesis and characterization of remarkable cationic and zwitterionic allyl zirconium complexes derived from trimethylenemethane (TMM). A direct synthetic route to the neutral precursors was found in the... 

Pharmacotherapy studies typically use one of the psychotherapies reviewed earlier as a platform for evaluation of one or more pharmacotherapies. Rela-... 

The discovery of the potent in vitro sialidase inhibitory activity and in vivo efficacy of zanamivir 12, and the increasing availability of 3D structural data for influenza virus sialidases in the 1990s, particularly with Neu5Ac and various inhibitors bound into the active site, provided a platform for further drug discovery efforts targeting... 

Wood chips can also be utilized as such to produce bioethanol. The cellulose and hemicellulose material is hydrolyzed in the presence of acids (H2SO4, HCl, or HCOOH) or enzymes to yield glucose and other monosaccharides [16]. Lignin is separated by filtration as a solid residue and the monosaccharides are fermented to ethanol, which, in turn, is separated from water and catalyst by distillation. Ethanol can be used not only as energy source but also as a platform component to make various chemicals, such as ethene and polyethene. Today green acetaldehyde and acetic acid from wood-derived bioethanol is manufactured by SEKAB Ab, at the Ornskoldsvik Biorefinery of the Future industrial park. 

Raw data is almost always incomplete, being highly dependent on the data production platform and often localized to a platform or regional database. Applications (and processes) generate data. However, applications often use proprietary data types and cannot parse data types from other third-party applications. It is important to consider that there are translation issues plus the host of reasons stated below in the requirements for data standards. 

---