Zinc Chloride Oxide

It was first described in 1608 when it was sublimed out of gum benzoin. It also occurs in many other natural resins. Benzoic acid is manufactured by the air oxidation of toluene in the liquid phase at 150°C and 4-6 atm. in the presence of a cobalt catalyst by the partial decarboxylation of phthalic anhydride in either the liquid or vapour phase in the presence of water by the hydrolysis of benzotrichloride (from the chlorination of toluene) in the presence of zinc chloride at 100°C. 

Resorcinol Derivatives. Aminophenols (qv) are important intermediates for the syntheses of dyes or active molecules for agrochemistry and pharmacy. Syntheses have been described involving resorcinol reacting with amines (91). For these reactions, a number of catalysts have been used / -toluene sulfonic acid (92), zinc chloride (93), zeoHtes and clays (94), and oxides supported on siUca (95). In particular, catalysts performing the condensation of ammonia with resorcinol have been described gadolinium oxide on siUca (96), nickel, or zinc phosphates (97), and iron phosphate (98). 

Dinitrotoluene is oxidized to 2,4-dinitrobenzoic acid [610-30-0] by potassium permanganate or chromic acid, and is reduced to 2,4-diaminotoluene by iron and acetic acid. It is reduced partially by zinc chloride and hydrochloric acid to 2-amino-4-nitrotoluene [99-55-8] and by ammonium sulfide to 4-amino-2-nitrotoluene [119-32-4],... 

Smoke-Generating Devices. Smoke generators are used by the military for daytime obscuration and signaling. For field use where portable stable systems ate requited, pyrotechnic devices are often employed. The primary composition since the 1940s has been HC smoke, which generates a cloud of zinc chloride, ZnCl, smoke by a series of reactions between hexachloroethane, C2Clg(HC), zinc oxide, and aluminum (3) (eq. 4—6). The zinc regenerated in... 

Alkyl Isoquinolines. Coal tar contains small amounts of l-methylisoquinoline [1721-93-3] 3-methylisoquinoline [1125-80-0] and 1,3-dimetliylisoquinoline [1721-94-4J. The 1- and 3-methyl groups are more reactive than others in the isoquinoline nucleus and readily oxidize with selenium dioxide to form the corresponding isoquinoline aldehydes (174). These compounds can also be obtained by the hydrolysis of the dihalomethyl group. The 1- and 3-methyhsoquinolines condense with benzaldehyde in the presence of zinc chloride or acetic anhydride to produce 1- and 3-styryhsoquinolines. Radicals formed by decarboxylation of carboxyUc acids react to produce 1-aIkyhsoquinolines. 

Oxidation of saligenin with chromic acid or silver oxide yields saUcyladehyde as the first product. Further oxidation results in the formation of sahcyhc acid, which is also obtained when saligenin is heated with sodium hydroxide at 200—240°C. Chlorination of an aqueous solution of the alcohol gives 2,4,6-trichlorophenol, and bromination in an alkaline medium yields 2,4,6-tribromophenol and tribromosaligenin. When saligenin is heated with one mole of resorcinol in the presence of anhydrous zinc chloride, 3-hydroxyxanthene forms. 

The central carbon atom is derived from an aromatic aldehyde or a substance capable of generating an aldehyde during the course of the condensation. Malachite green is prepared by heating benzaldehyde under reflux with a slight excess of dimethyl aniline in aqueous acid (Fig. 2). The reaction mass is made alkaline and the excess dimethylaniline is removed by steam distillation. The resulting leuco base is oxidized with freshly prepared lead dioxide to the carbinol base, and the lead is removed by precipitation as the sulfate. Subsequent treatment of the carbinol base with acid produces the dye, which can be isolated as the chloride, the oxalate [2437-29-8] or the zinc chloride double salt [79118-82-4]. 

In the ketone method, the central carbon atom is derived from phosgene (qv). A diarylketone is prepared from phosgene and a tertiary arylamine and then condenses with another mole of a tertiary arylamine (same or different) in the presence of phosphoms oxychloride or zinc chloride. The dye is produced directly without an oxidation step. Thus, ethyl violet [2390-59-2] Cl Basic Violet 4 (15), is prepared from 4,4 -bis(diethylamino)benzophenone with diethylaruline in the presence of phosphoms oxychloride. This reaction is very useful for the preparation of unsymmetrical dyes. Condensation of 4,4 -bis(dimethylamino)benzophenone [90-94-8] (Michler s ketone) with AJ-phenjl-l-naphthylamine gives the Victoria Blue B [2580-56-5] Cl Basic Blue 26, which is used for coloring paper and producing ballpoint pen pastes and inks. 

Anhydrous zinc chloride can be made from the reaction of the metal with chlorine or hydrogen chloride. It is usually made commercially by the reaction of aqueous hydrochloric acid with scrap zinc materials or roasted ore, ie, cmde zinc oxide. The solution is purified in various ways depending upon the impurities present. For example, iron and manganese precipitate after partial neutralization with zinc oxide or other alkah and oxidation with chlorine or sodium hypochlorite. Heavy metals are removed with zinc powder. The solution is concentrated by boiling, and hydrochloric acid is added to prevent the formation of basic chlorides. Zinc chloride is usually sold as a 47.4 wt % (sp gr 1.53) solution, but is also produced in soHd form by further evaporation until, upon cooling, an almost anhydrous salt crystallizes. The soHd is sometimes sold in fused form. 

Halobutyl Cures. Halogenated butyls cure faster in sulfur-accelerator systems than butyl bromobutyl is generally faster than chlorobutyl. Zinc oxide-based cure systems result in C—C bonds formed by alkylation through dehydrohalogenation of the halobutyl to form a zinc chloride catalyst (94,95). Cure rate is increased by stearic acid, but there is a competitive reaction of substitution at the halogen site. Because of this, stearic acid can reduce the overall state of cure (number of cross-links). Water is a strong retarder because it forms complexes with the reactive intermediates. Amine cure may be represented as follows ... 

A number of basic materials such as hydroxides, hydrides and amides of alkaline and alkaline earth metals and metal oxides such as zinc oxide and antimony oxide are useful catalysts for the reaction. Acid ester-exchange catalysts such as boric acid, p-toluene sulphonic acid and zinc chloride are less... 

A stream of ethylene oxide is passed through a solution of 107 g of 2-(p-chlorophenoxy)-2-methylpropionic acid and 2 g of zinc chloride in 200 ml of toluene, previously heated to between 55°C and 60°C, until 24 g of the gas have been dissolved. The reaction is allowed to continue for five hours, with gentle stirring. After this time has elapsed, the solution is cooled and washed successively with water, dilute ammonia and water until its pH becomes neutral. It is dried over anhydrous sodium sulfate, the solvent Is separated off under vacuum, and the resulting liquid is the monoglycol ester of 2-(p-chlorophenoxv)-2-methylpropionlc acid. 

Salt solutions When a zinc sheet is immersed in a solution of a salt, such as potassium chloride or potassium sulphate, corrosion usually starts at a number of points on the surface of the metal, probably where there are defects or impurities present. From these it spreads downwards in streams, if the plate is vertical. Corrosion will start at a scratch or abrasion made on the surface but it is observed that it does not necessarily occur at all such places. In the case of potassium chloride (or sodium chloride) the corrosion spreads downwards and outwards to cover a parabolic area. Evans explains this in terms of the dissolution of the protective layer of zinc oxide by zinc chloride to form a basic zinc chloride which remains in solution. 

Feitknecht has examined the corrosion products of zinc in sodium chloride solutions in detail. The compound on the inactive areas was found to be mainly zinc oxide. When the concentration of sodium chloride was greater than 0-1 M, basic zinc chlorides were found on the corroded parts. At lower concentrations a loose powdery form of a crystalline zinc hydroxide appeared. A close examination of the corroded areas revealed craters which appeared to contain alternate layers and concentric rings of basic chlorides and hydroxides. Two basic zinc chlorides were identified, namely 6Zn(OH)2 -ZnClj and 4Zn(OH)2 ZnCl. These basic salts, and the crystalline zinc hydroxides, were found to have layer structures similar in general to the layer structure attributed to the basic zinc carbonate which forms dense adherent films and appears to play such an important role in the corrosion resistance of zinc against the atmosphere. The presence of different reaction products in the actual corroded areas leads to the view that, in addition to action between the major anodic and cathodic areas as a whole, there is also a local interaction between smaller anodic and cathodic elements. 

Diisopropylamino(dimethyl)silyl]-2-propenyl]lithium adds to aromatic and x-branched aldehydes in the presence of anhydrous zinc chloride with essentially complete anti stereoselectiv-ity3s. as expected from the chair-like pericyclic transition state formed by the ( -intermediate. The addition products are not isolated, but after O-silylation, oxidative desilylation with retention of configuration forms the rmft-diols. 

The anode residues must be chemically processed to recover the plutonium remaining in the residues. This may amount to about 10% of the feed mass if delta alloy is the feed metal. Either aqueous or pyrochemical processes may be used for anode recovery. One pyrochemical process used for recovery utilizes oxidation of the plutonium with zinc chloride to form plutonium chloride salt, followed by calcium reduction of the PUCI3 contained in the salt phase to produce pure plutonium metal (the impurities follow the zinc metal obtained from the oxidation reaction and are discarded to waste). Impurities more stable than calcium chloride remain in the salt phase and are also... 

Generally, such a remarkable restriction of metal dissolution results not only from the formation of a thin surface oxide film but also from the formation of a comparatively thick film such as silver chloride or zinc chloride. In this chapter, however, we use the term passive film only for compact and thin oxide films. 

The cementition reaction between zinc oxide powder and aqueous zinc chloride was found to be both rapid and extremely exothermic. Although at least four days equilibration was allowed before examining any of the cements in detail, Sorrell found evidence that reaction was complete within 20 to 30 minutes and occurred without observable development of intermediate phases. He also found that, as the concentration of reactants was increased, so reaction rate increased until, at sufficiently high concentrations, reaction occurred too quickly to allow proper mixing of the reactants. Preheating the zinc oxide at 900 °C for 16 hours was found to slow the reaction down, but only slightly. 

Holland, H. C. (1930). The ternary system zinc oxide-zinc chloride-water. Journal of the Chemical Society, 643-8. 

---