Sulfate of lime

Synonyms Anhydrous calcium sulfate anhydrous sulfate of lime gypsum (CaS04-2H20 plaster of paris (CaS04-l/2H20)... 

Synonyms anhydrous calcium sulfate-anhydrite muriacite karstenite anhydrous gypsum anhydrous sulfate of lime hemihydrate-plaster of Paris annalin dried gypsum dried calcium sulfate dihydrate-gypsum alabaster satin spar mineral white terra alha satinite light spar selenite precipitated calcium sulfate native calcium sulfate... 

Calcium sulfate anhydrous anhydrite anhydrous gypsum anhydrous sulfate of lime Destab-, Drierite-, E516 karste-nite muriacite Snow White. 

Synonyms annalin calcii sulfas hemihydricus calcined gypsum dried calcium sulfate dried gypsum E516 exsiccated calcium sulfate plaster of Paris sulfate of lime yeso bianco. Appearance a white or almost white, odorless, crystalline, hygroscopic powder. 

Also known as anhydrous sulfate of lime, anhydrous gypsum is having somewhat pinkish colour. 

SYNONYMS anhydrite, anhydrous calcium sulfate, anhydrous gypsum, anhydrous sulfate of lime, calcium salt of sulfuric acid. 

Synonyms/Trade Names Anhydrous calcium sulfate, Anhydrous gypsum, Anhydrous sulfate of lime. Calcium salt of sulfuric acid [Note Gypsum is the dihydrate form Plaster of Paris is the hemihydrate form.]... 

Brine Preparation. Sodium chloride solutions are occasionally available naturally but they are more often obtained by solution mining of salt deposits. Raw, near-saturated brines containing low concentrations of impurities such as magnesium and calcium salts, are purified to prevent scaling of processing equipment and contamination of the product. Some brines also contain significant amounts of sulfates (see Chemicals FROMBRINe). Brine is usually purified by a lime—soda treatment where the magnesium is precipitated with milk of lime (Ca(OH)2) and the calcium precipitated with soda ash. After separation from the precipitated impurities, the brine is sent to the ammonia absorbers. 

The key difference between the brine process and seawater process is the precipitation step. In the latter process (Fig. 6) the seawater is first softened by a dding small amounts of lime to remove bicarbonate and sulfates, present as MgSO. Bicarbonate must be removed prior to the precipitation step to prevent formation of insoluble calcium carbonate. Removal of sulfates prevents formation of gypsum, CaS02 2H20. Once formed, calcium carbonate and gypsum cannot be separated from the product. 

Naphthalenesulfonic Acid. The sulfonation of naphthalene with excess 96 wt % sulfuric acid at < 80°C gives > 85 wt % 1-naphthalenesulfonic acid (a-acid) the balance is mainly the 2-isomer (P-acid). An older German commercial process is based on the reaction of naphthalene with 96 wt % sulfuric acid at 20—50°C (13). The product can be used unpurifted to make dyestuff intermediates by nitration or can be sulfonated further. The sodium salt of 1-naphthalenesulfonic acid is required, for example, for the conversion of 1-naphthalenol (1-naphthol) by caustic fusion. In this case, the excess sulfuric acid first is separated by the addition of lime and is filtered to remove the insoluble calcium sulfate the filtrate is treated with sodium carbonate to precipitate calcium carbonate and leave the sodium l-naphthalenesulfonate/7J(9-/4-J7 in solution. The dry salt then is recovered, typically, by spray-drying the solution. 

Recovering ammonia as a by-product from other processes accounted for less than 1% of the total U.S. ammonia production in 1987. The principal source of by-product ammonia is from the coking of coal. In the coking operation, about 15—20% of the nitrogen present in the coal is Hberated as ammonia and is recovered from the coke oven gas as ammonium sulfate, ammonia Hquor, and ammonium phosphates. The recovery product depends on the scmbbing medium employed, sulfuric acid, milk of lime, and phosphoric acid, respectively. Ammonium sulfate recovery by the so-called semidirect process, is most widely employed. 

The anaerobic reaction of sulfur dioxide with aqueous ammonia produces a solution of ammonium sulfite [10192-30-0]. This reaction proceeds efficientiy, even with a gas stream containing as Httie as 1 wt % sulfur dioxide. The sulfur dioxide can be regenerated at a high concentration by acidulation or by stream stripping of the ammonium sulfite solution, or the sulfite can be made to precipitate and the ammonia recovered by addition of lime (243). The process can also be modified to produce ammonium sulfate for use as fertili2er (244) (see Fertilizers). In a variant of this process, the use of electron-beam radiation cataly2es the oxidation of sulfur dioxide in the presence of ammonia to form ammonium sulfate (245). 

Sulfated Acids, Amides, and Esters. Reaction with sulfuric acid may be carried out on fatty acids, alkanolamides, and short-chain esters of fatty acids. The disodium salt of sulfated oleic acid is a textile additive and an effective lime soap dispersant. A typical sulfated alkanolamide stmcture is CiiH23C0NHCH2CH20S03Na. Others include the sulfates of mono and diethanolamides of fatty acids in the detergent range. The presence of... 

The metal salts reduce the alkalinity in the water therefore, it may be necessary to add base in the form of lime or soda ash. One part of technical aluminum sulfate (AI2 (804)3-141120) reduces the alkalinity as CaCO by 0.55 parts and one part of technical ferric sulfate, Fe2 (SO4 )3-H2 0, by 0.68 parts. The reaction is... 

Other Applications. Among other industrial uses of lime are causticizing agent in kraft (sulfate) paper (qv) plants recovery of ammonia (qv) from NH4CI (Solvay process) recovery of magnesium (qv) from seawater and brines via precipitation of Mg(OH)2 production of pesticides such as... 

The expansive component C A SI in Type K expansive cements hydrates in the presence of excess sulfate and lime to form ettringite is... 

Foliar Fungicides and Bactericides. Of the - 70,000 t/yr as copper in compounds used in agriculture, almost 75% is used in the control of fungi (see Fungicides, agricultural). The first reference to the use of copper as a fungicide dates to 1761 (83) where copper sulfate was used on wheat seed for the control of bunt. In 1807 (84) the discovery of copper as a fungicide was made and the discovery of Bourdeaux mixture (copper sulfate plus lime) followed in 1882. 

Aeration of ferric sulfate should be held to a minimum because of the hygroscopic nature of the material, particularly in damp atmospheres. Mixing of ferric sulfate and quicklime in conveying and dust vent systems should be avoided as caking and excessive heating can result. The presence of ferric sulfate and lime in combination has been known to destroy cloth bags in pneumatic unloading devices. Because ferric sulfate in the presence of moisture will stain, precautions similar to those discussed for ferric chloride should be observed. 

The paper and pulp industries consume taif/e quantities of Ca(OH)2 and precipitated (as distinct from naturally occurring) CaCOs. The largest application of lime in pulp manufacture is as a causlicizing agent in sulfate (kraft) plants (p. 89). Here the waste NajC solution is reacted with lime to regenerate the caustic soda used in the process ... 

It should be noted that if sodium hydroxide is used instead of lime, the chemical cost will be higher, less sludge will be produced, and effluent sulfate concentration will be higher.15... 

The lime application and settling process treatment consists of adding a milk of lime slurry to the wastewater to precipitate the hydroxide of the heavy metals and reduce dissolved sulfate concentrations through the formation of gypsum. Sufficient lime is needed to adjust the pH to between 10 and 11.5. Also, settling may have to be aided by adding small quantities of organic polyelectrolytes. 

---