Sodium ammonium chlorate

Ammonia, hydrochloric acid, and sodium perchlorate are mixed and the reaction mixture crystallised in a vacuum-cooled crystalliser. Ammonium perchlorate crystals are centrifuged, reslurried, recentrifuged, and then dried and blended for shipment. Mother Hquor is evaporated to precipitate sodium chloride and the depleted mother Hquor is recycled to the reactor. The AP product made by this method is 99% pure and meets the specifications for propeUant-grade ammonium perchlorate. The impurities are ammonium chloride, sodium perchlorate, ammonium chlorate, and water insolubles. 

MRH values Ammonium bromate 4.52/82, ammonium chlorate 6.36/76, ammonium perchlorate 6.53/70, barium bromate 3.97/76, barium chlorate 4.85/72, calcium bromate 5.02/70, calcium chlorate 6.53/62, potassium bromate 4.56/73, potassium chlorate 5.81/56, potassium perchlorate 6.07/63, silver chlorate 4.60/73, sodium bromate 4.85/70, sodium chlorate 6.90/63, sodium perchlorate 6.69/60... 

The converse obviously applies to ammonium nitrate explosives, which must not contain any chlorates, since during storage a double exchange reaction may occur resulting in the formation of ammonium chlorate (p. 476, Vol. II), an unstable substance which decomposes spontaneously. A number of patents were taken out between 1880 and 1895, for explosives based on the use of ammonium chlorate or mixtures of ammonium nitrate with potassium or sodium chlorate. Many accidents which occurred through the spontaneous decomposition of these explosives proved the impossibility of using mixtures containing both chlorates and ammonium salts (Hantke [79]). 

Pure sodium and potassium chlorates do not possess explosive properties, but in earlier times were important components of the most widely used explosive mixtures (Vol. III). Also some complex salts of chloric acid possess initiating properties (Vol. III). Chlorates of nitrogen bases are explosives and deserve some attention. In particular, ammonium chlorate should be mentioned owing to the part it has played in the history of explosives. 

Other ingredients that may be found in smokeless powders include camphor, carbazole, cresol, diethyleneglycoldinitrate (DEGDN), dimethylse-bacate, dinitrocresol, di-normal-propyl adipate, 2.4-dinitrodiphenylamine, PETN, TNT, RDX, acaroid resin, gum arabic, synthetic resins, aluminum, ammonium chlorate/oxalate/perchlorate, pentaerythritol dioleate, oxamide, lead carbonate/salicylate/stearate, magnesium oxide, sodium aluminum fluoride, sodium carbonate/bicarbonate, petrolatum, dioctylphthalate, stannic oxide, potassium cyrolate, triphenyl bismuth. 

Sodium chlorate forms colorless, odorless crystals or white granules. The melting point of the crystals is 248 Celsius, but it begins to decompose into oxygen and sodium perchlorate when heated to 300 Celsius. The crystals are highly soluble in water, but relatively insoluble in alcohol, and most common organic solvents. Sodium chlorate is widely used in pyrotechnic compositions, and in the preparation of ammonium chlorate, and perchlorate, which are used in powerful solid rocket fuels. 

Summary Ammonium chlorate is prepared in a similar manner as other inorganic ammonium salts, by the precipitation of metal ions with carbon dioxide. In thiscase, sodium chlorate istreated with ammonia, and carbon dioxide isthen passed there into. The carbon dioxide reacts with the water forming carbonic add. The carbonic add reacts with the sodium chlorate forming the water insoluble sodium bicarbonate. The ammonia molecules in solution take up an addic hydrogen from the carbonic add, and then unite with the chi orate ions forming ammonium chlorate in solution. The salt isthen easily recovered by recrystallization. 

Sodium chlorate contains more oxygen than potassium chlorate, but has the disadvantage of being hygroscopic. Neither salt ought to be used in mixtures which contain ammonium nitrate or ammonium perchlorate, for double decomposiUon mi t occur with the formation of dangerous ammonium chlorate. Potassium chlorate is one of the chlorates least soluble in water, potassium perchlorate one of the least soluble of the perchlorates. The latter salt is practically insoluble in alcohol. The perchlorates are in-... 

Approximate sensitivity of chlorate compositions Potassium < Barium < Sodium < Ammonium... 

Amitrole Ammonium thiocyanate But-2-yne-1,4-diol Cacodylic acid Calcium cyanamide 2,4-D Endothall Endothall sodium Magnesium chlorate Methyl mercury hydroxide... 

Plants can also be pests that need to be controlled, particulady noxious weeds infesting food crops. Prior to 1900, inorganic compounds such as sulfuric acid, copper nitrate, sodium nitrate, ammonium sulfate, and potassium salts were used to selectively control mustards and other broadleaved weeds in cereal grains. By the early 1900s, Kainite and calcium cyanamid were also used in monocotyledenous crops, as well as iron sulfate, copper sulfate, and sodium arsenate. Prom 1915 to 1925, acid arsenical sprays, carbon bisulfate, sodium chlorate, and others were introduced for weed control use. Total or nonselective herbicides kill all vegetation, whereas selective compounds control weeds without adversely affecting the growth of the crop (see Herbicides). 

For vanadium solvent extraction, Hon powder can be added to reduce pentavalent vanadium to quadrivalent and trivalent Hon to divalent at a redox potential of —150 mV. The pH is adjusted to 2 by addition of NH, and an oxyvanadium cation is extracted in four countercurrent stages of mixer—settlers by a diesel oil solution of EHPA. Vanadium is stripped from the organic solvent with a 15 wt % sulfuric acid solution in four countercurrent stages. Addition of NH, steam, and sodium chlorate to the strip Hquor results in the precipitation of vanadium oxides, which are filtered, dried, fused, and flaked (22). Vanadium can also be extracted from oxidized uranium raffinate by solvent extraction with a tertiary amine, and ammonium metavanadate is produced from the soda-ash strip Hquor. Fused and flaked pentoxide is made from the ammonium metavanadate (23). 

Oxidation of 2-mercapto-l,2,4-triazolo[l,5-c]pyrimidines (174) with chlorine or bromine in water (64BRP951652 65JCS3369), with hydrogen peroxide and chlorine (95MIP1), as well as with sodium chlorate in hydrochloric acid (94JMC2371) gave the corresponding 2-sulfonyl halide derivatives 175. Oxidation of the 2-alkylmercapto compounds 176 to the 2-alkylsufonyl derivatives 177 was made with ammonium peroxodisulfate and sulfuric acid... 

Procedure. To obtain experience in the method, the purity of analytical-grade potassium chlorate may be determined. Prepare a 0.02M potassium chlorate solution. Into a 250 mL conical flask, place 25.0 mL of the potassium chlorate solution, 25.0mL of 0.2M ammonium iron(II) sulphate solution in 2M sulphuric acid and add cautiously 12 mL concentrated sulphuric acid. Heat the mixture to boiling (in order to ensure completion of the reduction), and cool to room temperature by placing the flask in running tap water. Add 20 mL 1 1 water/phosphoric(V) acid, followed by 0.5 mL sodium diphenyl-amine-sulphonate indicator. Titrate the excess Fe2+ ion with standard 0.02M potassium dichromate to a first tinge of purple coloration which remains on stirring. 

C03-0110. The following pairs of substances are quite different despite having similar names. Write correct formulas for each, (a) sodium chloride and sodium hypochlorite (b) nitrogen oxide and nitrogen dioxide (c) potassium chlorate and potassium perchlorate and (d) ammonia and ammonium ion. 

When hot, ammonia and compounds, which contain nitrogen-hydrogen bonds eg ammonium salts and cyanides react violently with chlorates and alkaline perchlorates. Diammonlum sulphate, ammonium chloride, hydroxyl-amine, hydrazine, sodamide, sodium cyanide and ammonium thiocyanate have been cited. So far as hydrazine is concerned, the danger comes from the formation of a complex with sodium or lithium perchlorate, which is explosive when ground. Many of these interactions are explosive but the factors which determine the seriousness of the accident are not known. 

Ethylene glycol combusted spontaneously when it was added to potassium permanganate at ambient temperature and at 100°C in the presence of ammonium or potassium dichromate, sodium chlorite or silver chlorate. With potassium dichromate, the medium reached 170°C. 

Aluminium borohydride Aluminium chloride Aluminium chlorate Ammonium tetrachloroaluminate Aluminium fluoride Aluminium trihydroxide Aluminium ammonium sulphate Aluminium potassium sulphate Aluminium nitride Aluminium nitrate Sodium aluminate Aluminium sodium aluminate Aluminium phosphate Aluminium phosphide Aluminium borate Aluminium oxychloride Aluminium fluorosilicate Aluminium magnesium silicate Aluminium sulphate... 

The industrial production of Prussian blue is based on the reaction in aqueous solution of sodium hexacyanoferrate(n), Na4Fe(CN)6, with iron(n) sulfate, FeS04-7H20 in the presence of an ammonium salt, which results initially in the formation of the colourless insoluble iron(n) hexa-cyanoferrate(n) (Berlin white). Prussian blue is generated by subsequent oxidation with a dichromate or chlorate. 

MRH Aluminium 10.71/33, iron 4.35/50, magnesium 10.88/40, manganese 5.06/50, sodium 5.56/55, phosphorus 7.32/25, sulfur 4.27/20 Mixtures of the chlorate with ammonium salts, powdered metals, phosphorus, silicon, sulfur or sulfides are readily ignited and potentially explosive [1], Residues of ammonium thiosulfate in a bulk road tanker contaminated the consignment of dry sodium chlorate subsequently loaded, and exothermic reaction occurred with gas evolution during several hours. Laboratory tests showed that such a mixture could be made to decompose explosively. A reaction mechanism is suggested. 

Hydroxylamine is a powerful reducant, particularly when anhydrous, and if exposed to air on a fibrous extended surface (filter paper) it rapidly heats by aerobic oxidation. It explodes in contact with air above 70°C [1]. Barium peroxide will ignite aqueous hydroxylamine, while the solid ignites in dry contact with barium oxide, barium peroxide, lead dioxide and potassium permanganate, but with chlorates, bromates and perchlorates only when moistened with sulfuric acid. Contact of the anhydrous base with potassium dichromate or sodium dichromate is violently explosive, but less so with ammonium dichromate or chromium trioxide. Ignition occurs in gaseous chlorine, and vigorous oxidation occurs with hypochlorites. 

MRH Ammonium nitrate 3.97/84, chromium trioxide 3.01/81, hydrogen peroxide 6.36/68, nitric acid 5.84/61, potassium dichromate 1.59/tr., sodium chlorate 6.07/69, sodium nitrate 3.18/68... 

---