Other Inorganics

In fishes, additive or more-than-additive toxicity occurs with mixtures of salts of copper and mercury, copper-zinc-phenol, and copper-iuckel-zinc. Accumulation of copper in gills of fathead minnows during exposure to 16.0 xg Cu/L is reduced by added ioific calcium, which competes with Cu for gillbinding sites. 

---

Strictly speaking the alkyl halides are esters of the halogen acids, but since they enter into many reactions (t.g., formation of Grignard reagents, reaction with potassium cyanide to yield nitriles, etc.) which cannot be brought about by the other eaters, the alkyl halides are usually distinguished from the esters of the other inorganic acids. The preparation of a number of these is described below. 

Qualitative analysis for the elements. This includes an examination of the effect of heat upon the substance—a test which inter alia will indicate the presence of inorganic elements—and quahtative analysis for nitrogen, halogens and sulphur and, if necessary, other inorganic elements. It is clear that the presence or absence of any or all of these elements would immediately exclude from consideration certain classes of organic compounds. 

FLAMERETARDANTS - ANTIMONYAND OTHER INORGANIC FLAME RETARDANTS] (Vol 10)... 

Acetyl chlotide reacts with aromatic hydrocarbons and olefins in suitably inert solvents, such as carbon disulfide or petroleum ether, to furnish ketones (16). These reactions ate catalyzed by anhydrous aluminum chlotide and by other inorganic chlotides (17). The order of catalytic activity increases in the order... 

Antimony and other inorganic flame retardants, Halogenated flame retardants,... 

Flame letaidancy can be impaited to plastics by incorporating elements such as bromine, chlorine, antimony, tin, molybdenum, phosphoms, aluminum, and magnesium, either duriag the manufacture or when the plastics are compounded iato some useful product. Phosphoms, bromine, and chlorine are usually iacorporated as some organic compound. The other inorganic flame retardants are discussed hereia. 

Inert Gas Dilution. Inert gas dilution involves the use of additives that produce large volumes of noncombustible gases when the polymer is decomposed. These gases dilute the oxygen supply to the flame or dilute the fuel concentration below the flammability limit. Metal hydroxides, metal carbonates, and some nitrogen-producing compounds function in this way as flame retardants (see Flame retardants, antimony and other inorganic compounds). 

Chemical Properties. In addition to the reactions Hsted in Table 3, boron trifluoride reacts with alkali or alkaline-earth metal oxides, as well as other inorganic alkaline materials, at 450°C to yield the trimer trifluoroboroxine [13703-95-2] (BOF), MBF, and MF (29) where M is a univalent metal ion. The trimer is stable below — 135°C but disproportionates to B2O2 and BF at higher temperatures (30). 

Plasmids can be introduced into ceUs by several methods. The most common method is transformation, where the recipient ceUs are made competent to receive DNA by washing with a solution of or other inorganic ions. Then the naked DNA is added direcdy a fraction of the ceUs take... 

Reaction with Other Inorganic Halogen Compounds. Anhydrous HCl forms addition compounds at lower temperatures with halogen acids such as HBr and HI, and also with HCN. These compounds are stable at room temperature. 

Other Inorganics. Inorganic species in solution have been studied very effectively by Raman spectroscopy. Work in this area includes the investigation of coordination compounds (qv) of fluorine (qv) (40), the characterization of low dimensional materials (41) and coordinated ligands (42), and single-crystal studies (43). Several compilations of characteristic vibrational frequencies of main-group elements have been pubflshed to aid in the identification of these species (44,45). 

Ring-Opening Polymerization. As with most other inorganic polymers, ring-opening polymerization of cyclotetrasilanes has been used to make polysilanes (109,110). This method, however, has so far only been used for polymethylphenylsilane (eq. 12). Molecular weights (up to 100,000) are higher than from transition-metal catalyzed polymerization of primary silanes. 

Ion Exchange. Crystalline molecular sieve ion exchangers do not foUow the typical rules and patterns exhibited by organic and other inorganic ion exchangers. Many provide combinations of selectivity, capacity, and stability superior to the more common cation exchangers. Their commercial utilization has been based on these unique properties (59). 

---