Reducing power

A series of experiments can be performed and an order of reducing power established. 

For the equilibrium M(s) M (aq) + 2e, it might then be (correctly) assumed that the equilibrium for copper is further to the left than for zinc, i.e. copper has less tendency to form ions in solution than has zinc. The position of equilibrium (which depends also on temperature and concentration) is related to the relative reducing powers of the metals when two different metals in solutions of their ions are connected (as shown in Figure 4.1 for the copper-zinc cell) a potential difference is noted because of the differing equilibrium positions. 

The alkali metal tetrahydridoborates are salts those of sodium and potassium are stable in aqueous solution, but yield hydrogen in the presence of a catalyst. They are excellent reducing agents, reducing for example ion(III) to iron(II). and silver ions to the metal their reducing power is used in organic chemistry, for example to reduce aldehydes to alcohols. They can undergo metathetic reactions to produce other borohydrides, for example... 

Group V hydrides are reducing agents, the reducing power increasing from NH3 to BiHa, as thermal stability decreases. 

These closely resemble the corresponding sulphides. The alkali metal selenides and tellurides are colourless solids, and are powerful reducing agents in aqueous solution, being oxidised by air to the elements selenium and tellurium respeetively (cf. the reducing power of the hydrides). 

This is done by estimating the reducing power of the sugar after hydrolysis (or inversion ) by acid, the glucose and fructose thus formed having very nearly the same reducing power. 

The highest G-ratios are obtained when grinding with straight oil coolants. Such oils reduce power, increase maximum depth of cut, and produce smoother finishes. Disadvantages include inabiUty to remove heat from the work, oil mist in the work area, fire hazard, and tendency to hold grinding swarf (fine metal chips and abrasive particles produced in the grinding process) in suspension. Reference 51 is an excellent survey article for grinding fluids. 

Fig. 7. Control of fan performance with inlet vane control. SoHd lines marked A and N show normal performance without vanes (vanes wide open). As vanes are progressively closed, static and power curves are modified as indicated by dashed lines. Intersection ( - ) of the system resistance curve with these reduced pressure curves at points B, C, D, and E shows how imparting more spin to the inlet air reduces flow. Projecting points A to E vertically downward to the corresponding power curve locates fan power points A through E7 Power savings achieved over throttling control can be estimated by projecting points B through E vertically downward to the A power curve and comparing the value with that from the proper reduced power curve. To...

Neta.1 Ama.lga.ms. Alkali metal amalgams function in a manner similar to a mercury cathode in an electrochemical reaction (63). However, it is more difficult to control the reducing power of an amalgam. In the reduction of nitro compounds with an NH4(Hg) amalgam, a variety of products are possible. Aliphatic nitro compounds are reduced to the hydroxylamines, whereas aromatic nitro compounds can give amino, hydra2o, a2o, or a2oxy compounds. 

Oligo- and higher saccharides are produced extensively by acid-and/or enzyme-catalyzed hydrolysis of starch, generally in the form of symps of mixtures (12). These products are classified by thek dextrose equivalency (DE), which is an indication of thek molecular size and is a measure of thek reducing power with the DE value of anhydrous D-glucose defined as 100. 

Demethanizer Overhead Expander and Multifeed Fractionation. Incorporation of an expander into the conventional high pressure demethanizer system eliminates bottlenecks in the refrigeration system, the demethanizer condenser, and charge gas compressor. It reduces the cost by lowering the refrigeration power. Multiple feed deethanization and ethylene fractionation debottlenecks the deethanizer, ethylene fractionator, and the refrigeration systems, thereby reducing power consumption. 

Pressure at the pulsing device and the conditions for cavitation and water hammer may be estimated by the methods of Wilhams and Little [Trans. Jnst. Chem. Eng. (London), 32, 174 (1954)] provided the pressure-drop characteristics of the tower internals are known. Jealous and Johnson (loc. cit) have had good success in computing the power required for pulsing. Since power requirement alternates, the use of a flywheel on the pulse mechanism to act as an energy reservoir is suggested as a means of reducing power requirements. Alterna-... 

Gyratories make a product with open-side settings of 5 to 10 in at discharge rates from 600 to 6000 ton/h, depending on size. Most manufacturers offer a throw from 14 to 2 in. The throughput and power draw depend on the throw and the hardness of the ore, and on the amount of undersized material in the feed. Removal of undersize (which can amount to 14 of the feed) by a stationaiy grizzly can reduce power draw... 

The total yield amounts to 260-266 g. (48.5-49.5 per cent of the theoretical amount). The product is contaminated by slight traces of d-glucose and possesses a very faint reducing power towards Fehling s solution. For complete purification it is recrystallized (with practically no loss and practically no change in melting point) from five parts of methyl alcohol with the use, if necessary, of decolorizing carbon. 

Figure 7-4. Reduced power versus reduced flow.

Figure 7-5. Reduced power versus pressure ratio.

As previously mentioned, R, versus jj. is an invariant coordinate system. This means that the reduced power, jj., can be expressed as a function of pressure ratio, R, across the expander (Figure 7-5). Knowing this. Equation 7-5 can be rewritten as ... 

Calculating Pj It is necessary to determine Pi ft to be able to determine the inlet and bypass valve steps. As seen in the invariant coordinate systems, the reduced power, j. is a function of the pressure ratio, R ... 

Loss of cooling pump Loss of cooling Cooling system Pump redundancy, opcr.Hor LiLtiGii. reduce power me... 

Turbochargers use the expansion of exhaust gas to pump combustion air to an engine. Exhaust gas is directed through a set of nozzles to drive a turbine wheel. Directly connected to the exhaust turbine is an air compressor turbine that delivers combustion air to the power cylinders. Thus, back-pressure is put on the engine exhaust, reducing power slightly, but the net effect of the increase in air mass flow available for combustion i.s to increase horsepower. 

---