Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Selective development

Fluid samples will be taken using downhole sample bombs or the MDT tool in selected development wells to confirm the PVT properties assumed in the development plan, and to check for areal and vertical variations in the reservoir. In long hydrocarbon columns (say 1000 ft) it is common to observe vertical variation of fluid properties due to gravity segregation. [Pg.333]

A review of industrial processes that employ homogeneous catalysts is by Jennings, ed. (Selected Developments in Catalysis, Blackwell Scientific, 1985). Some of those processes are ... [Pg.2092]

In the production of crude oil, the greatest part of the crude oil occurs as a water-in-oil emulsion. The composition of the continuous phase depends on the water/oil ratio, the natural emulsifier systems contained in the oil, and the origin of the emulsion. The natural emulsifiers contained in crude oils have a complex chemical structure, so that, to overcome their effect, petroleum-emulsion demulsifiers must be selectively developed. As new oil fields are developed, and as the production conditions change at older fields, there is a constant need for demulsifiers that lead to a rapid separation into water and oil, as well as minimal-residual water and salt mixtures. [Pg.325]

Characterization of the finally-produced material includes final physical characterization along the lines described under interim physical characterization and chemical characterization (homogeneity). The latter includes selection, development, assessment, and validation of methodologies for homogeneity testing includ-... [Pg.25]

This book on bioEPR intends to avoid such misunderstandings from the start. The primary goal of a bioEPR spectroscopist is to contribute to an understanding of life at the molecular level. The theory and practice of the spectroscopy is selectively developed as a means to this goal. [Pg.4]

As a general phenomenon, observed already by Fischer and coworkers, activity and FT synthesis selectivity develop in the initial time of a run in a process of Formierung (formation)16—in modem terms self-organization and catalyst restructuring. In order to achieve high performance of synthesis with cobalt as catalyst, the temperature had to be raised slowly up to the temperature of steady-state conversion. A distinct thermodynamically controlled state of the Co surface, populated with reactants and intermediates, can be assumed. This state depends on temperature and particularly on CO partial pressure, and its catalytic nature changes with changing conditions. [Pg.170]

It is generally agreed that an agent that causes developmental toxicity in laboratory animals at dosage levels that cause no maternal toxicity (i.e., selective develop-... [Pg.281]

Bioassays have been likened to analytical machines insofar as pharmacologists use them to assign biological properties to compounds in the same way a chemist measures the physical-chemical properties of molecules. If the fundamental role of the medicinal chemist is to optimize the pharmaceutical properties of so-called lead compounds by structural modification, then the role of the pharmacologist in the drug discovery process is to select, develop, and apply bioassays to provide relevant robust data that inform the medicinal chemist of the impact of the modifications he makes. [Pg.59]

After introducing the algorithm for strategic bond selection developed in connection with "computer-assisted synthetic analysis" (see Part B), we can now return to the use of radical intermediates in the synthesis of monocyclic (and polycyclic) compounds (see Heading 6.1.3). [Pg.201]

At lead selection, after which typically more chemistry effort is invested, the selected compounds can be profiled in a broader (secondary) panel of assays, hopefully confirming the selective nature of the leads. If this is the case, spot checking in the primary panel through the optimization phase may be sufficient to ensure selectivity is retained while the required potency at the primary target is achieved. If the selected leads are still rather promiscuous, or certain individual unwanted liabilities remain, these should be monitored by testing in the primary panel (or in additional individual assays) and improved upon during lead optimization. Tfie broader panel can then be applied again to the selected development candidates for a final check and these may even be extended further to additional specialized panels for added security. [Pg.288]

Key activities CR Synthesis sequence selection Development of second-generation Regular production... [Pg.128]

Burgess, C (2000), Valid analytical methods and procedures a best practice approach to method selection, development and evaluation (Cambridge Royal Society of Chemistry). [Pg.259]

This chapter focuses on selected developments and applications of mass spectrometry for the analysis of gases and volatile compounds relevant in inorganic mass spectrometry. A brief introduction to isotope ratio measurements by gas source mass spectrometry is presented in Section 8.3. [Pg.215]

After the original publication of this highlight in 1999 more than 300 related papers have appeared in the field. A complete coverage is well beyond the scope of this book. Therefore only an update on some selected developments is given. [Pg.25]

Roth HD (2001) Selected Developments in the 20 Century Photochemistry Historical Sketches, Europ. Photochem. Assoc. Nemslett. No. 71 37-57. [Pg.35]

Batrachotoxin at present remains an important, indeed often essential, tool for mechanistic studies of the function of voltage-dependent sodium channels and for the investigation of the role of depolarization and/or influx of sodium ions on physiological functions. Batrachotoxin has been particularly useful in the study of the function of sodium channels, purified and reconstituted into artificial lipid bilayers. A summary and overview of the extensive studies with batrachotoxin appeared in 1986 (5). Since that time more than 100 articles dealing with the activity of batrachotoxin and/ or the radioligand batrachotoxinin A 20a-[ H]benzoate have appeared, and it is beyond the scope of the present review to summarize this extensive recent literature. A few selected developments are as follows allosteric enhancement of the action of batrachotoxins by pyrethroid insecticides... [Pg.191]

In this article, we will present selected developments in chalcogenide solid-state chemistry of the past decade. We will begin from the simple binary systems and evolve towards more complex systems. [Pg.700]


See other pages where Selective development is mentioned: [Pg.75]    [Pg.129]    [Pg.472]    [Pg.19]    [Pg.20]    [Pg.21]    [Pg.147]    [Pg.493]    [Pg.456]    [Pg.136]    [Pg.8]    [Pg.54]    [Pg.499]    [Pg.216]    [Pg.229]    [Pg.289]    [Pg.367]    [Pg.93]    [Pg.367]    [Pg.204]    [Pg.113]    [Pg.520]    [Pg.116]    [Pg.12]    [Pg.178]    [Pg.472]    [Pg.204]    [Pg.205]    [Pg.73]    [Pg.267]    [Pg.208]   
See also in sourсe #XX -- [ Pg.259 ]




SEARCH



Biocatalytic systems developing more selective

Catalytic reagents developing more selective

Cation-selective electrodes development

Chemisorption selective, method development

Chromatographic mode selection HPLC method development

Clinic development candidate selection

Column selectivity, HPLC development

Developer selectivity

Developer selectivity

Developing countries drug selection

Development of Selective COX-2 Inhibitors

Diastereocontrol in Olefin Metathesis the Development of Z-Selective Ruthenium Catalysts

Drug products, formulation development excipient selection

Drug products, formulation development state selection

Factor selection method development

Full development site selection

HPLC method development column selection

HPLC method development mobile phase selection

HPLC method development solvent selection

Integration of Lead Optimization Data for Candidate Selection and Development

Level selection, method development

Level selection, method development case studies

Material selection developing

Material selection development

Materials development and selection

Method development solvent selectivity

Micro selected developments

Negative resists developer selection

Recent material developments for improved selectivity of SiC gas sensors

Recommendations development cause selection

Reverse phase method development selectivity

Sectoring Strain Selection and Development

Selected Developments in Micro-analytical Technology

Selected New Developments in Catalyst and Adsorbent Manufacture

Selection and Development

Selection of Optimal Form for Development

Selection of Penoxsulam for Development

Selection, natural product drug development

Selective acetylene hydrogenation catalyst development

Selective chemistry development

Selective process development

Selectivity HPLC development

Selectivity determination immunoassay development

Selectivity development

Selectivity development

Selectivity method development

Selectivity, immunoassay development

Shape-selective catalysis development

Sorbent selectivity, HPLC development

Stationary phase selections, HPLC development

The development of organic farming in selected countries

Under development selectivity

© 2024 chempedia.info