Reflection Difference Spectroscopy

Spectroscopies such as UV-visible absorption and phosphorescence and fluorescence detection are routinely used to probe electronic transitions in bulk materials, but they are seldom used to look at the properties of surfaces [72]. As with other optical techniques, one of the main problems here is the lack of surface discrimination, a problem that has sometime been b q)assed by either using thin films of the materials of interest [73, 74], or by using a reflection detection scheme. Modulation of a parameter, such as electric or magnetic fields, stress, or temperature, which affects the optical properties of the sample and detection of the AC component of the signal induced by such periodic changes, can also be used to achieve good surface sensitivity [75]. This latter approach is the basis for techniques such as surface reflectance spectroscopy, reflectance difference spectroscopy/reflectance anisotropy spectroscopy, surface photoadsorption... 

This method is sometimes called reflectance difference spectroscopy (RDS) and, because of considerable overlap, this method is sometimes also considered to be a variation of electroreflectance spectroscopy (see p. 50 for further details). 

Reflection anisotropy spectroscopy (RAS) probes the electronic structure of surfaces and interfaces using visible and near-ultraviolet photons. From its origins in the 1980s as an in situ real-time monitor of semiconductor growth processes, RAS has evolved into a technique that has been applied to surfaces in UHV, surfaces under high pressure of ambient gas and solid/liquid interfaces in the field of electrochemistry, together with more spedaUst applications such as liquid crystal devices. (Note that the technique was also known as reflection difference spectroscopy (RDS) in the early years.) Most optical probes are not surface sensitive... 

Langmuir-Blodged films have been deposited on many different substrates. The substrates used include different types of glass (such as quartz for UV-visible spectroscopy) CaF2 plates for transmission infrared spectroscopy silicon, germanium, and ZnSe plates for internal reflection infrared spectroscopy. For electrochemical applications, LB films... 

Different experimental approaches were applied in the past [6, 45] and in recent years [23, 46] to study the nature of the organic residue. But the results or their interpretation have been contradictory. Even at present, the application of modem analytical techniques and optimized electrochemical instruments have led to different results and all three particles given above, namely HCO, COH and CO, have been recently discussed as possible methanol intermediates [14,15,23,46,47]. We shall present here the results of recent investigations on the electrochemical oxidation of methanol by application of electrochemical thermal desorption mass spectroscopy (ECTDMS) on-line mass spectroscopy, and Fourier Transform IR-reflection-absorption spectroscopy (SNIFTIRS). 

Specular reflection IR spectroscopy has been used by Cole and coworkers to study the orientation and structure in PET films [36,37]. It has allowed characterizing directly very highly absorbing bands in thick samples, in particular the carbonyl band that can show saturation in transmission spectra for thickness as low as 2 pm. The orientation of different conformers could be determined independently. Specular reflection is normally limited to uniaxial samples because the near-normal incident light does not allow measuring Ay. However, it was shown that the orientation parameter along the ND can be indirectly determined for PET by using the ratio of specifically selected bands [38]. This approach was applied to the study of biaxially oriented PET bottles [39]. 

Some characteristics of, and comparisons between, surface-enhanced Raman spectroscopy (SERS) and infrared reflection-absorption spectroscopy (IRRAS) for examining reactive as well as stable electrochemical adsorbates are illustrated by means of selected recent results from our laboratory. The differences in vibrational selection rules for surface Raman and infrared spectroscopy are discussed for the case of azide adsorbed on silver, and used to distinguish between "flat" and "end-on" surface orientations. Vibrational band intensity-coverage relationships are briefly considered for some other systems that are unlikely to involve coverage-induced reorientation. 

In addition to the indirect experimental evidence coming from work function measurements, information about water orientation at metal surfaces is beginning to emerge from recent applications of a number of in situ vibrational spectroscopic techniques. Infrared reflection-absorption spectroscopy, surface-enhanced Raman scattering, and second harmonic generation have been used to investigate the structure of water at different metal surfaces, but the pictures emerging from all these studies are not always consistent, partially because of surface modification and chemical adsorption, which complicate the analysis. 

It is easy to imagine a variety of spectroscopies, as many as the number of possible classifications according to the radiation used and/or the state of the matter (solid, liquid, or gas) interacting with this radiation. The tremendous development of new experimental techniques, as well as the sophistication of those that already exist, is giving rise to the continuous appearance of new spectroscopic techniques. Nevertheless, the different spectroscopies and spectroscopic techniques are rooted in a basic phenomenon the absorption, reflection, emission, or scattering of radiation by matter in a selective range of frequencies and under certain conditions. ... 

Rossi et al. [30] evaluated rheologically mucins of different origin with polyacrylic acid and sodium carboxymethyl cellulose. The same group also reported a novel rheological approach based on a stationary viscoelastic test (creep test) to describe the interaction between mucoadhesive polymers and mucins [31,32]. Jabbari et al. [33] used attenuated total-reflection infrared spectroscopy to investigate the ehain interpenetration of polyaciylic acid in the mucin interface. 

Atomic force microscopy and attenuated total reflection infrared spectroscopy were used to study the changes occurring in the micromorphology of a single strut of flexible polyurethane foam. A mathematical model of the deformation and orientation in the rubbery phase, but which takes account of the harder domains, is presented which may be successfully used to predict the shapes of the stress-strain curves for solid polyurethane elastomers with different hard phase contents. It may also be used for low density polyethylene at different temperatures. Yield and rubber crosslink density are given as explanations of departure from ideal elastic behaviour. 17 refs. 

Most of the above membrane-oriented studies were carried out for peptides in multilayer systems that were collapsed or transferred onto a sample cell surface. An alternative and very interesting way to study membrane systems is by IRRAS (infrared reflection absorption spectroscopy) at the air-water interface. In this way, unilamellar systems can be studied as a function of surface pressure and under the influence of various membrane proteins and peptides added. Mendelsohn et al.[136] have studied a model series of peptides, [K2(LA) ] (n = 6, 8, 10, 12), in nonaqueous (solution), multilamellar (lipid), and unilamellar (peptide-IRRAS) conditions. In the multilamellar vesicles these peptides are predominantly helical in conformation, but as peptide only monolayers on a D20 subphase the conformation is (1-sheet like, at least initially. For different lengths, the peptides show variable surface pressure sensitivity to development of some helical component. These authors further use their IR data to hypothesize the existence of the less-usual parallel (i-sheet conformation in these peptides. A critical comparison is available for different secondary structures as detected using the IRRAS data for peptides on H20 and D20 subphasesJ137 ... 

Figure 5.11 Diffuse Reflectance Absorbance Spectroscopy Taking In Chemometiics (DRASTIC), a FT-IR-based method for rapid screening for metabohtes. Different concentrations of ampicillin (ranging from 0 to 5 mg/mL) were mixed with a constant amount E. coli cells, dried and analyzed by FT-IR (Winson et at, 1997).

Polarisation modulation infrared reflection-absorption spectroscopy (PM-IRRAS or IRRAS). Potential modulation IR studies rely on switching the potential at a reflective electrode between rest and active states, generating difference spectra, However, the EMIRS technique has several drawbacks the relatively fast potential modulation requires that only fast and reversible electrochemical process are investigated the absorption due to irreversibly chemisorbed species would be gradually eliminated by the rapid perturbation. Secondly, there is some concern that rapid modulation between two potentials may, to some extent, in itself induce reactions to occur. 

The mechanism of C02 reduction to methane at Cu electrodes has been proposed by various groups [72-74], most of which involved the splitting of adsorbed CO followed by the hydrogenation of surface C atoms. When DeWulf et al. used X-ray photoelectron spectroscopy (XPS) and Auger electron spectroscopy to study the reaction [72], they observed surface-bound carbenes (Cu CH2) as an intermediate in the system. Likewise, others used both in situ infrared (IR) reflection absorption spectroscopy and surface-enhanced Raman spectroscopy to observe the initial product of C02 reduction on Cu [74]. Typically, two different linearly bound CO species were identified and attributed to adsorption on either surface defect sites or terraces. 

IRES Versus Other Reflection Vibrational Spectroscopies. In order to achieve a sensitivity sufficient to detect absorption due to molecules at submonolayer coverages, some sort of modulation technique is highly desirable. Two candidates for modulation are the wavelength and the polarization state of the incident light. The former has been successfully applied to single crystal studies by Pritchard and co-workers (5j, while the latter is the basis of the Toronto ellipsometric spectrometer and of the technique employed by Bradshaw and coworkers (6) and by Overend and co-workers (7). The two different techniques achieve comparable sensitivities, which for the C-0 stretching mode of adsorbed carbon monoxide amounts to detection of less than 0.01 monolayer. Sensitivity, of course, is very much a function of resolution, scan rate, and surface cleanliness. 

---