Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Properties of Jute

Like all the lignocellulosic fibers, the physical and chemical properties of jute fiber is also dependent on the three chemical components, viz., cellulose, hemicellulose and lignin. The chemical composition and structural parameters of jute fibers are represented in Table 20.3. [Pg.458]

The lignocellulosic fibers reveal substantial deviation in diameter along with the length of individual fibers. The qualities and properties of lignocellulosic fibers are generally dependent on features like size, maturity, as well as processing methods implemented for the extraction of fibers. The modulus of the fiber reduces with proliferation in diameter. [Pg.458]

Tests by Roe et al. [63] with unidirectional jute fiber-reinforced UP resins show a linear relationship (analogous to the linear mixing rule) between the volume content of fiber and Young s modulus and tensile strength of the composite over a range of fiber content of 0-60%. Similar results are attained for the work of fracture and for the interlaminate shear strength (Fig. 20). Chawla et al. [64] found similar results for the flexural properties of jute fiber-UP composites. [Pg.805]

Banbaji [57] has examined the tensile properties of jute fibers before and after alkali treatment and has shown that the tenacity decreases with increasing concentration an initial value of 3.6 g/den falling to 2.5 g/den at 9% alkali and to 1.5 g/den at 24% alkali, at 2°C and 1-h immersion. The extension at break, referred to the fiber length before immersion, increased from 1.2% without alkali treatment to 3.6% at 9% alkali and then fell slightly to 2.4% at 24% alkali. [Pg.433]

Memon, A. and Nakai, A. (2013) Mechanical properties of jute spun yarn/PLA tubular braided composite by pultrusion molding. Energy Procedia,... [Pg.338]

Gassan J, Bledzki A (1997) The influence of fiber-surface treatment mechanical properties of jute-polypropylene composites. Compos Part A 28 1001-1005... [Pg.447]

Table 24.3 Physicomechanical properties of jute fiber-reinforced polymer composites... Table 24.3 Physicomechanical properties of jute fiber-reinforced polymer composites...
Gassan J, Bledzki AK (1999) Possibilities of improving the mechanical properties of jute/ epoxy composites by alkali treatment of fibers. Compos Sci Technol 59 1303-1309 Singh B, Gupta M, Verma A (1998) Studies on adsorptive interaction between natural fiber and coupling agents. J Appl Polym Sci 70 1847-1858... [Pg.719]

Datta C, Basu D (2002) Mechanical and dynamic mechanical properties of jute fibers novolac-epoxy composite laminates. J Appl Polym Sci 85 2800-2807... [Pg.720]

Tripathy SS, Landro LD (2000) Mechanical properties of jute fiber and interface strength with an epoxy resin. J Appl Polym Sci 75 1585-1596... [Pg.720]

Y. Yu, Y. Yang and H. Hamada, Impact Properties of Jute and Jute Hybrid Reinforced Composites, Proceedings of the 18 Inter national Conference On Composite Materials -ICCM18, Jeju Island, South Korea, paper T44-T43 (2012). [Pg.80]

J. Gassan, and A.K. Bledzki, Possibilities for improving the mechanical properties of jute/ epoxy compositesby alkali treatment of fibres. Compos. Sci. Technol. 59,1303-1309 (1999). E.T.N. Bisanda, The effect of alkali treatment on the adhesion characteristics of sisal fibres. Appl. Compos. Mater. 7, 331-339 (2000). [Pg.280]

B. Oztiirk, Hybrid effect in the mechanical properties of jute/rockwool hybrid fibres reinforced phenol formaldehyde composites. Fibers Polym. 11(3), 464-473 (2010). [Pg.323]

O Dell [84] studied the weathering properties of jute fiber/unsaturated polyester composites and compared them with glass fiber/unsaturated polyester composites. Samples were exposed to cycles of continuous UV exposure for 102 min, followed by 18 min of water spray for a total of 1200 hours. It was noted that there were no observable visual differences between weathered glass and jute fiber specimens in color changes or surface erosion effects. [Pg.360]

E. S. Rodriguez, P. M. Stefani, and A. Vazquez, Effects of fibers alkali treatment on the resin transfer molding processing and mechanical properties of jute-vinylester composites, /. Compos. Mater. 41(14),1729-1741 (2007). [Pg.448]

Lignocellulosic Polymer Composites The physical properties of jute are ... [Pg.460]

X. Wang, Y. Cui, Q. Xu, B. Xie, and W.J. Li, Effects of alkali and silane treatment on the mechanical properties of jute-fiber-reinforced recycled polypropylene composites. J. Vinyl Addit Technol. 16,183-188(2010). [Pg.474]

A. Mir, R. Zitoune, F. Collombet, and B. Bezzazi, Study of mechanical and thermomechanical properties of jute/epoxy composite laminate.. Reinf. Plus. Compos. 29, 1669-1680 (2010). [Pg.475]

X. Wang, Y. Cui, H. Zhang, and B. Xie, Effects of methyl methacrylate grafting and polyamide coating on the interfacial behavior and mechanical properties of jute-fiber-reinforced polypropylene composites./. Vinyl Addit. Technol. 18,113-119(2012). [Pg.520]

Sever K, Sarikanat M, Seki Y, Erkan G, Erdogan U H, Erden S (2012) Surface treatments of jute fabric The influence of surface characteristics on jute fabrics and mechanical properties of jute/polyester composites . Industrial Crops and Products, 35, 22-30. [Pg.68]

All natural fibers are hydrophihc and their moisture content ranges from 3 to 13%. This leads to a very poor interface between natural fiber and the hydrophobic matrix and very poor moisture resistance. Several fiber surface treatments are used to improve the interface viz-thermal treatment, chemical treatment, and use of coupling agents (Bledzki and Gassan, 1999). Fillers are added to composites for technical and chemical reasons (Milewski and Katz, 1980). Calcium carbonate has maximum usage as filler in plastics and FRP due to its low cost, non-toxicity and lack of odor. Present work gives effectiveness of jute fabric treatment and addition of filler on properties of jute reinforced polyester composites (JFRP). [Pg.125]

Wang W, Cai Z, Yu J, Xia Z. Changes in composition, structure and properties of jute fibers after chemical treatments. Fibers Polym 2009 10 776-780. [Pg.396]

Roy A, Chakraborty S, Kundu SP, Basak RK, Majumder SB, Adhikari B. Improvement in mechanical properties of jute fibers through mild alkali treatment as demonstrated by utilisation of the Weibull distribution model. BioresourTechnol 2012 107 222-228. [Pg.396]

Other properties of jute fibre started to be noticed in the middle of the last century. The jute fibre and its subsequent processing might find application in new areas of use and also newer products. [Pg.61]

Table 2.13 Physical properties of jute and other fibres... Table 2.13 Physical properties of jute and other fibres...
Chen HT, Gao J, Wang G, Shi SQ, Zhang SB, Cai LP (2004) Effect on temperature on calcium carbonate deposition in situ on bamboo fiber and polymer interfaces. Wood Fiber Sci 46 1-12 Datta C, Basu D, Baneijee AN (2002) Mechanical and dynamical mechanical properties of jute fibers-Novolac-Epoxy composite laminates. J App Polym Sci 85 2800-2807 Garea SA, Nicolescu A, Deleanu C, lovu H (2010) New nanocomposites based on epoxy resins reinforced with modified montmorillonite. Int J Polym Anal Charact 15 497-508 Ghosh P, Mitra PS, Baneijee AN (2003) Photopolymerization of methyl methacrylate with the use of bromine as photoinitiator. J Polym Sci Polym Chem Ed ll(8) 2021-2030 Jia N, Li SM, Ma MG, Sun RC, Zhu L (2011) Green microwave-assisted synthesis of cellulose/ calcium silicate nanocomposites in ionic liquids and recycled ionic liquids. Caibohydr Res 34 2970-2974... [Pg.153]

See other pages where Properties of Jute is mentioned: [Pg.89]    [Pg.21]    [Pg.21]    [Pg.884]    [Pg.896]    [Pg.407]    [Pg.414]    [Pg.499]    [Pg.708]    [Pg.715]    [Pg.313]    [Pg.314]    [Pg.322]    [Pg.360]    [Pg.458]    [Pg.460]    [Pg.466]    [Pg.467]    [Pg.472]    [Pg.279]    [Pg.279]   


SEARCH



Jutes

© 2024 chempedia.info