Proper Security Measures

Another access control measure is controlling the visitor entrance to the facility by having specific procedures for handling visitors. Visitors are required to sign in at specified point(s) and must be accompanied by an authorized escort at all times. They are never to be given the freedom to roam at will within a facility. 

One final means of controlling access to a facility is to ensure 

Another basic security measure is to issue color photo identification cards. The following information should be on the identification badge  

---

Machines must not be used unless properly guarded (or operatives are trained). All damaged guards/security measures must be reported. 

Properly calibrate radiation measurement instruments before each use. Train personnel in handling radiation wastes. Each department that generates radioactive wastes should develop written procedures that cover handling of, transportation, and disposal. Properly secure and store all waste materials and designate controlled areas. Dispense or draw materials only behind a protective barrier. Label refrigerators that contain stored materials. Notify the radiation control officer when receiving a contaminated shipment. 

Physical security is an important part of any security program. When given proper instructions and training, security guards can play a key role in preventing access to areas where COCs are used or stored. Door locks, of either the normal key type or the more expensive electronic type, are necessary where COCs are being used or stored. Other physical security measures include locked cabinets, locked storage areas, locked drawers, and perhaps alarm systems. Any extraordinary laboratory security measures should be commensurate with the potential risks and should be imposed in a manner that does not hamper research or safety um-easonably. 

Procedures and instructions for safe packaging for the typology of substances or products, as well as specific characteristics packagers, must receive theoretical and on-job training, to ensure that workers have a real sense of hazard and proper execute activity with the security measures set for them and for the packaging of cargo (BVA/TOTAL, 2012-2014). 

Immediate action will be taken by all commanders to initiate the program of training outlined herein. Special attention will be given to the basic requirements of security against chemical attack to the end that every individual and every unit will be able to take proper protective measures in case of subjection to a surprise gas attack. Both offensive and defensive chemical warfare will be included in training and tactical inspections by appropriate commanders. 

Proper authorities may take further measures pursuant to Articles 4 and 7, issue pursuant Ordinances on the basis of Articles 6 and 8, and where securing containment measures are necessary, demand security in advance and restrict agricultural and forest land use under specific conditions (Article 10). 

The essential characteristic of a proper test set is that it represents a new drawing from the population , realized as a new, independent [X,Y] data set specifically not used in the modeling. It is evident that any A -object data set constitute but only one specific realization of an iV-tuple of individual TSE materializations. It takes a completely new ensemble of objects, the test set, to secure a second manifestation. All new measurements, for example when a PAT model is used for the purpose of automated prediction, constitute precisely such a new drawing/sampling. All new measurement situations are therefore to be likened to a test set - and this is exactly what is missing in all forms of cross-validation. 

Physical security of the system is required when it stores data that must be secured. All necessary and reasonable measures of restricting logical access to the system should be instituted to prevent loss or corruption of the secured data. The laboratory must estabhsh a hierarchy of passwords that limit access, by function, to those properly authorized individuals who need such functions in the performance of their jobs. Security must be structured in a way that allows access Copyright 2003 Marcel Dekker, Inc. 

Fig. 7.2. A versatile bubbler manometer. The bubbler manometer Is securely mounted by the reservoir and attached to the vacuum system. It is then easily filled by the following process. The level of the bottom end of the vertical tube dipping into the reservoir is marked on the outside of the reservoir. Next, a calculated amount of mercury is filtered into the reservoir. With the valve between the two arms open, a vacuum is slowly drawn on the manometer. The mercury level must not drop below the mark on the reservoir, or else bubbles will enter the vertical tube and shoot mercury through the vacuum system. If the mercury level in the reservoir comes close to the mark, the manometer is brought up to atmospheric pressure and more mercury is added. When the proper amount of mercury is present in the fully evacuated manometer, the mercury level should be about 10 mm above the mark on the reservoir, and the upper meniscus should be in a region of the manometer suitable for measurement, as illustrated. Once the manometer is properly filled and evacuated, the valve is closed to isolate the reference arm at high vacuum.

Safety, Loss Prevention and Security are the direct responsibility of line management and are important measures of managerial performance. In order to insure that every employee is prepared to work safely, every supervisor has the responsibility to provide a safe work environment with proper equipment and adequate training. Each supervisor also has the responsibility, through personal example and the involvement of all employees, to create a climate in which everyone shares concern for the safety and security of their fellow workers and for the prevention of losses. 

Failure to maintain laboratory records to include complete data derived from all tests necessary to assure compliance with established specifications and standards [21 CFR 211.194]. Specifically, your firm failed to properly maintain electronic files containing data secured in the course of tests from 20 HPLCs and 3 GCs. Additionally, no investigation was conducted by your company to determine the cause of missing data and no corrective measures were implemented to prevent the reoccurrence of this event. 

Liquids may be measured and transferred using a graduated pipette and a pipette pump. The style of pipette pump shown in Figure 5.3A is available in four sizes. The 2-mL size (blue) works well wifh the range of pipettes previously indicated. To fill the pipette, one simply rotates the knurled wheel forward so that the piston moves upward. The liquid is discharged by slowly turning the wheel backward until the proper amount of liquid has been expelled. The top of the pipette must be inserted securely into the pump and held there with one hand to obtain an adequate seal. The other hand is used to load and release the liquid. 

---