Polymer temperature resistance

The industrial value of furfuryl alcohol is a consequence of its low viscosity, high reactivity, and the outstanding chemical, mechanical, and thermal properties of its polymers, corrosion resistance, nonburning, low smoke emission, and exceUent char formation. The reactivity profile of furfuryl alcohol and resins is such that final curing can take place at ambient temperature with strong acids or at elevated temperature with latent acids. Major markets for furfuryl alcohol resins include the production of cores and molds for casting metals, corrosion-resistant fiber-reinforced plastics (FRPs), binders for refractories and corrosion-resistant cements and mortars. 

In the late 1980s, new fully aromatic polyester fibers were iatroduced for use ia composites and stmctural materials (18,19). In general, these materials are thermotropic Hquid crystal polymers that are melt-processible to give fibers with tensile properties and temperature resistance considerably higher than conventional polyester textile fibers. Vectran (Hoechst-Celanese and Kuraray) is a thermotropic Hquid crystal aromatic copolyester fiber composed of -hydroxyben2oic acid [99-96-7] and 6-hydroxy-2-naphthoic acid. Other fully aromatic polyester fiber composites have been iatroduced under various tradenames (19). 

Extmsion of polyethylene and some polypropylenes is usually through a circular die into a tubular form, which is cut and collapsed into flat film. Extmsion through a linear slot onto chilled rollers is called casting and is often used for polypropylene, polyester, and other resins. Cast, as well as some blown, films may be further heated and stretched in the machine or in transverse directions to orient the polymer within the film and improve physical properties such as tensile strength, stiffness, and low temperature resistance. 

Polyquinolines are some of the most versatile thermally stable polymers they were developed during the 1970s in response to increasing demand for high temperature resistant materials and are undergoing commercial development (Maxdem, Inc., San Dimas, California). Evidence of their stabiUty is... 

Fabric Composition. The method of fabric manufacture dictates many of the characteristics of the sheet, but intrinsic properties are firmly estabhshed by the base polymer selected. Properties such as fiber density, temperature resistance, chemical and light stabiUty, ease of coloration, surface energies, and others are a function of the base polymer. Thus, because nylon absorbs more moisture than polypropylene, spunbonded fabrics made from nylon are more water absorbent than fabrics of polypropylene. 

Solubility and Solution Properties. Poly(vinyhdene chloride), like many high melting polymers, does not dissolve in most common solvents at ambient temperatures. Copolymers, particularly those of low crystallinity, are much more soluble. However, one of the outstanding characteristics of vinyUdene chloride polymers is resistance to a wide range of solvents and chemical reagents. The insolubiUty of PVDC results less from its... 

The choice of coagulant for breaking of the emulsion at the start of the finishing process is dependent on many factors. Salts such as calcium chloride, aluminum sulfate, and sodium chloride are often used. Frequentiy, pH and temperature must be controlled to ensure efficient coagulation. The objectives are to leave no uncoagulated latex, to produce a cmmb that can easily be dewatered, to avoid fines that could be lost, and to control the residual materials left in the product so that damage to properties is kept at a minimum. For example, if a significant amount of a hydrophilic emulsifier residue is left in the polymer, water resistance of final product suffers, and if the residue left is acidic in nature, it usually contributes to slow cure rate. 

In the 1960s, CIBA Products Co. marketed and manufactured glycidylated o-cresol novolak resins, which had been developed by Koppers Co. as high temperature-resistant polymers. Dow offered glycidylated phenol novolak resins, SheU introduced polyglycidyl ethers of tetrafunctional phenols, and Union Carbide developed a triglycidyl p- am in oph en o1 resin. 

Polyamide or polyimide polymers are resistant to aliphatic, aromatic, and chlorinated or fluorinated hydrocarbons as well as to many acidic and basic systems but are degraded by high-temperature caustic exposures. 

Polymer Clarity of moulding Temperature resistance Toughness... 

Although the structure is polar much of the polarity is frozen in at normal service temperatures. In such conditions electrical insulation properties are quite good even at high frequencies. As with many aromatic polymers, tracking resistance leaves something to be desired. 

FRAZER, A. H., High Temperature Resistant Polymers, Interscience, New York (1968)... 

Standard-grade PSAs are usually made from styrene-butadiene rubber (SBR), natural rubber, or blends thereof in solution. In addition to rubbers, polyacrylates, polymethylacrylates, polyfvinyl ethers), polychloroprene, and polyisobutenes are often components of the system ([198], pp. 25-39). These are often modified with phenolic resins, or resins based on rosin esters, coumarones, or hydrocarbons. Phenolic resins improve temperature resistance, solvent resistance, and cohesive strength of PSA ([196], pp. 276-278). Antioxidants and tackifiers are also essential components. Sometimes the tackifier will be a lower molecular weight component of the high polymer system. The phenolic resins may be standard resoles, alkyl phenolics, or terpene-phenolic systems ([198], pp. 25-39 and 80-81). Pressure-sensitive dispersions are normally comprised of special acrylic ester copolymers with resin modifiers. The high polymer base used determines adhesive and cohesive properties of the PSA. 

Naturally, fibers and whiskers are of little use unless they are bonded together to take the form of a structural element that can carry loads. The binder material is usually called a matrix (not to be confused with the mathematical concept of a matrix). The purpose of the matrix is manifold support of the fibers or whiskers, protection of the fibers or whiskers, stress transfer between broken fibers or whiskers, etc. Typically, the matrix is of considerably lower density, stiffness, and strength than the fibers or whiskers. However, the combination of fibers or whiskers and a matrix can have very high strength and stiffness, yet still have low density. Matrix materials can be polymers, metals, ceramics, or carbon. The cost of each matrix escalates in that order as does the temperature resistance. 

The alkylation of PS with N-methylolacetamide in the presence BF3 catalysis at room temperature was prepared by Swiger et al. [ 15,16] who reported that the polymer has resistance to higher stroke and temperature as shown in Scheme (4). 

Polytetrafluoroethylene (Teflon) (PTFE) is the most corrosion-resistant thermoplastic polymer. This polymer is resistant to practically every known chemical or solvent combination and has the highest useful temperature of commercially available polymers. It retains its properties up to 500°F (260°C). Because of its exceedingly high molecular weight PTFE is processed by sintering. The PTFE resin is compressed into shapes under high pressure at room temperature and then heated to 700°F (371°C) to complete the sintering process. 

Alkylpolyglucosides (APGs) are highly biodegradable surfactants [1344]. The addition of APGs, even at very low concentrations, to a polymer mud can drastically reduce the fluid loss even at high temperatures. Moreover, both fluid rheology and temperature resistance are improved. 

A modified acrylamide polymer that is hydrophobically associating has remarkably improved the properties of salt resistance and temperature resistance, compared with high-molecular-weight polyacrylamide [1351]. 

The arc resistance of a polymer is the length of time for which we can apply an electrical discharge to its surface before it breaks down and begins to conduct electricity. Breakdotvn typically takes the form of conductive carbonaceous tracks that are caused by oxidation due to locally high temperatures. Polymers -with lowpolarity typically fare better in this test than polar polymers. Arc resistance is reduced by dirt, moisture, and other surface contaminants. 

Polyesters are, in general, organic solvent resistant. They show excellent room temperature resistance to organic solvents, such as hydrocarbons, alcohols, and chlorinated hydrocarbons. At slightly elevated temperatures of approximately 60 °C, alcohols and aromatic solvents can damage the polymer. Strong acids and bases can cause chemical damage to polyesters, as can ketones and phenols. 

Fiber reinforced ceramics such as C/SiC, SiC/SiC can be manufactured by the polymer infiltration and pyrolysis technique at reasonable cost. The developed production technique allows the manufacturing of large and complex structures comparable to fiber-reinforced plastics. The material has excellent high temperature resistance, low density, and good damage tolerance, and is therefore well... 

A wax-like polymer with resistance to a wide range of temperatures, high resistance to chemical attack and very low frictional resistance. It is widely used in O-rings, seals and gaskets it may also be sintered on to a mould surface to assist the release of the product. Polythene... 

The personal security of our citizens also benefits directly from science and technology. Our police forces are equipped with light, strong bulletproof vests made of modem synthetic materials, and fire rescue personnel wear protective clothing made from temperature-resistant polymers. The smoke detectors and carbon monoxide detectors in our homes are based on chemical processes that detect dangerous substances. Personal security is enhanced in the broadest sense by water purification and by the chemical testing procedures that assure us of clean water and food. 

---