Poly acrylonitrile copolymer

The morphology of the fibrous cellulose graft copolymers depended on the method of initiation of free radical formation, experimental conditions during the copolymerization, chemical modification of the cellulose before reaction, and the type of monomer used (60). Variations in the shape of the fibrous cross section, in layering effects in the fiber, and in the location and distribution of the grafted copolymer in the fiber were observed by electron microscopy (61). Cotton cellulose—poly (acrylonitrile) copolymer was selected to show the possible variations in location and distribution of the grafted copolymer in the fiber. 

Kang D.W., Choi H.R., Kweon D.K., Stability constants of amidoximated chitosan-g-poly(acrylonitrile) copolymer for heavy metal ions, J. Appl. Polym. Sci., 73(4), 1999, 469-476. 

Very recent work in our laboratories as yet unpublished has shown that poly(acrylonitrile) copolymer having properties suitable for fibers, when polymerized in the presence of a functionalized nanoclay, may absorb ammonium polyphosphate during filament extrusion and yield fibers with LOI > 35. In these fibers, a clear synergy between nanoclay and flame retardant is observed, and filament properties are little changed from those acceptable for normal textile applications. 

Nitrile mbber finds broad application in industry because of its excellent resistance to oil and chemicals, its good flexibility at low temperatures, high abrasion and heat resistance (up to 120°C), and good mechanical properties. Nitrile mbber consists of butadiene—acrylonitrile copolymers with an acrylonitrile content ranging from 15 to 45% (see Elastomers, SYNTHETIC, NITRILE RUBBER). In addition to the traditional applications of nitrile mbber for hoses, gaskets, seals, and oil well equipment, new applications have emerged with the development of nitrile mbber blends with poly(vinyl chloride) (PVC). These blends combine the chemical resistance and low temperature flexibility characteristics of nitrile mbber with the stability and ozone resistance of PVC. This has greatly expanded the use of nitrile mbber in outdoor applications for hoses, belts, and cable jackets, where ozone resistance is necessary. 

Other Polymers. Besides polycarbonates, poly(methyl methacrylate)s, cycfic polyolefins, and uv-curable cross-linked polymers, a host of other polymers have been examined for their suitabiUty as substrate materials for optical data storage, preferably compact disks, in the last years. These polymers have not gained commercial importance polystyrene (PS), poly(vinyl chloride) (PVC), cellulose acetobutyrate (CAB), bis(diallylpolycarbonate) (BDPC), poly(ethylene terephthalate) (PET), styrene—acrylonitrile copolymers (SAN), poly(vinyl acetate) (PVAC), and for substrates with high resistance to heat softening, polysulfones (PSU) and polyimides (PI). 

Blends of poly(vinyl chloride) (PVC) and a-methylstyrene—acrylonitrile copolymers (a-MSAN) exhibit a miscibiUty window that stems from an LCST-type phase diagram. Figure 3 shows how the phase-separation temperature of 50% PVC blends varies with the AN content of the copolymer (96). This behavior can be described by an appropriate equation-of-state theory and interaction energy of the form given by equation 9. 

Membrane stmcture is a function of the materials used (polymer composition, molecular weight distribution, solvent system, etc) and the mode of preparation (solution viscosity, evaporation time, humidity, etc). Commonly used polymers include cellulose acetates, polyamides, polysulfones, dynels (vinyl chloride-acrylonitrile copolymers) and poly(vinyhdene fluoride). 

At one time butadiene-acrylonitrile copolymers (nitrile rubbers) were the most important impact modifiers. Today they have been largely replaced by acrylonitrile-butadiene-styrene (ABS) graft terpolymers, methacrylate-buta-diene-styrene (MBS) terpolymers, chlorinated polyethylene, EVA-PVC graft polymers and some poly acrylates. 

Table 15.2 Some properties of a methyl methacrylate-acrylonitrile copolymer compared with a general purpose poly(methyl methacrylate) compound at 23°C and 50% R.H (German DIN tests)...

Copolymers of acrylonitrile and vinylidene chloride have been used for many years to produce films of low gas permeability, often as a coating on another material. Styrene-acrylonitrile with styrene as the predominant free monomer (SAN polymers) has also been available for a long time. In the 1970s materials were produced which aimed to provide a compromise between the very low gas permeability of poly(vinylidene chloride) and poly(acrylonitrile) with the processability of polystyrene or SAN polymers (discussed more fully in Chapter 16). These became known as nitrile resins. 

The important features of rigidity and transparency make the material competitive with polystyrene, cellulose acetate and poly(methyl methacrylate) for a number of applications. In general the copolymer is cheaper than poly(methyl methacrylate) and cellulose acetate, tougher than poly(methyl methacrylate) and polystyrene and superior in chemical and most physical properties to polystyrene and cellulose acetate. It does not have such a high transparency or such food weathering properties as poly(methyl methacrylate). As a result of these considerations the styrene-acrylonitrile copolymers have found applications for dials, knobs and covers for domestic appliances, electrical equipment and car equipment, for picnic ware and housewares, and a number of other industrial and domestic applications with requirements somewhat more stringent than can be met by polystyrene. 

Aryloxyphosphazene copolymers can also confer fireproof properties to flammable materials when blended. Dieck [591] have used the copolymers III, and IV containing small amounts of reactive unsaturated groups to prepare blends with compatible organic polymers crosslinkable by the same mechanism which crosslinks the polyphosphazene, e.g. ethylene-propylene and butadiene-acrylonitrile copolymers, poly(vinyl chloride), unsaturated urethane rubber. These blends were used to prepare foams exhibiting excellent fire retardance and producing low smoke levels or no smoke when heated in an open flame. Oxygen index values of 27-56 were obtained. 

Coleman and Sivy also used an infrared transmission cell to undertake degradation studies under reduced pressure on a series of poly(acrylonitrile) (ACN) copolymers [30-33]. Thin films prepared from a polymer were mounted in the specially designed temperature-controlled cell mounted within the infrared spectrometer. The comparative studies were made on ACN copolymers containing vinyl acetate [30,32], methacrylic acid [30,31] and acrylamide [30,33]. The species monitored was the production of the cyclised pyridone structure. This was characterised in part by loss of C=N stretch (vC = N) intensity at 2,240 cm-1 accompanied by the appearance and increase in intensity of a doublet at 1,610/1,580 cm-1. 

Creep and relaxation AMS, styrene -acrylonitrile copolymer, poly vinyl chloride), polyfrnclliyl methacrylate)... 

In 1968, a French Patent issued to the Sumitomo Chemical Company disclosed the polymerization of several vinyl monomers in C02 [84], The United States version of this patent was issued in 1970, when Fukui and coworkers demonstrated the precipitation polymerization of several hydrocarbon monomers in liquid and supercritical C02 [85], As examples of this methodology, they demonstrated the preparation of the homopolymers PVC, PS, poly(acrylonitrile) (PAN), poly(acrylic acid) (PAA), and poly(vinyl acetate) (PVAc). In addition, they prepared the random copolymers PS-co-PMMA and PVC-co-PVAc. In 1986, the BASF Corporation was issued a Canadian Patent for the preparation of polymer powders through the precipitation polymerization of monomers in carbon dioxide at superatmospheric pressures [86], Monomers which were polymerized as examples in this patent included 2-hydroxyethylacrylate and iV-vinylcarboxamides such as iV-vinyl formamide and iV-vinyl pyrrolidone. 

E4 polystyrene-Z)/ocA -[l,4-polybutadiene-grq/Z -poly(styrene-co-acrylonitrile)] (copolymer from styrene and acrylonitrile grafted to a 1,4-polybutadiene-polystyrene two-block copolymer at unspecified sites of some of the but-2-ene-... 

Poly(acrylonitrile) (PAN) (Equation 6.68) forms the basis for a number of fibers and copolymers. As fibers, they are referred to as acrylics or acrylic fibers. The development of acrylic fibers began in the early 1930s in Germany, but they were first commercially produced in the United States by DuPont (Orion) and Monsanto (Acrilan) around 1950. 

PS (polystyrene), PVC [poly(vinyl chloride)], PC (bisphenol A polycarbonate) PMMA [poly (methyl methacrylate)], PB (polybutadiene), SAN (styrene-acrylonitrile copolymer),NBR (acrylonitrile-butadiene rubber), PPE (polyphenylene ether), SBR (styrene-butadiene rubber)... 

Core-shell emulsion polymers with a core or rubbery stage based on homopolymers or copolymers of butadiene are used as impact modifiers in matrix polymers, such as ABS, for styrene acrylonitrile copolymer methyl methacrylate (MMA) polymers, poly(vinyl chloride) (PVC), and in various engineering resins such as polycarbonate) (PC) poly(ester)s, or poly(styrene)s, further in thermosetting resins such as epoxies. 

ASA structural latexes have been synthesized in a two stage seeded emulsion polymerization. In the first stage, partially crosslinked poly(n-butyl acrylate) and poly( -butyl acrylate-sfaf-2-ethylhexyl acrylate) rubber cores are synthesized. In the second stage, a hard styrene acrylonitrile copolymer (SAN) shell is grafted onto the rubber seeds (16). 

M. Fowler, J. Barlow, and D. Paul, Effect of copolymer composition on the miscibility of blends of styrene-acrylonitrile copolymers with poly (methyl methacrylate), Polymer, 28(7) 1177-1184, June 1987. 

Kamakatsu, T, E. Fukada, and K. Shinohara Electrical conduction of heated poly(vinyl chloride)acrylonitrile copolymer. Rep. Prog. Pol. Phys., Japan 4, 317 (1964). 

---