Pipe, aluminum

Carbon steel Sch. 40 Fiberglass reinforced polyester Fiberglass reinforced vinylester Glass pipe Aluminum Sch. 40 304 stainless steel Sch. 5 Saran-lined steel Polypropylene- lined steel Rubber-linedsteel Sch. 40 316 stainless steel Sch. 5 304 stainless steel Sch. 40 Kynar-Ifned steel 316 stainless steel Sch. 40 Alloy 20 Sch. 5 FEP Teflon-lined steel PFA Teflon-lined steel Armored-glass pipe PTFE Teflon-lined steel Monel 400 Sch. 5 Nickel 200 Sch. 5 Alloy 20 Sch. 40 Monel 400 Sch. 40 Inconel 600 Sch. 5 Titanium Sch. 5 Nickel 200 Sch. 40 Titanium Sch. 40 Inconel 600 Sch. 40 Glass-lined steel Sch. 40 Hastelloy C-276 Sch. 5 Zirconium Sch. 5 Hastelloy B Sch. 5 Zirconium Sch. 40 Hastelloy C-276 Sch. 40 Hastelloy B Sch. 40 Tantalum-lined steel Sch. 5 Tantalum-lined steel Sch. 40... 

The storage and transfer of raw chemicals requires special considerations relative to the equipment that come into contact with epoxy resins. Carbon steel is generally satisfactory for pipe and tank construction and will not rust beneath the epoxy resin. Rust occuring above the level of the epoxy and accidentally introduced into the resin may be removed by filters. Epoxy coated steel pipe, aluminum or stainless steel pipe, or epoxy fiberglass composite tubing is used to prevent rusting downstream of the filter. 

Carbon steel Sch. 40 Fiberglass reinforced polyester Fiberglass reinforced vinylester Glass pipe Aluminum Sch. 40 304 stainless steel Sch. 5 Saran-lined steel Polypropylene- lined steel Rubber-lined steel Sch. 40 316 stainless steel Sch. 5 304 stainless steel Sch. 40 Kynar-llned steel 316 stainless steel Sch. 40... 

In particular, excluding air and moisture by nitrogen blanketing and rinsing equipment with an aqueous 0.5% sodium nitrate or sodium carbonate 3-5% solution have been shown to inhibit chloride SCC. To prevent cracking on the outside of insulated pipe, aluminum foil has been wrapped between the insulation and pipe to provide some measure of cathodic protection. 

Handling Temperatures. Optimum temperature for pumping is in 37—48°C range. Piping should be stainless steel, aluminum, or galvanized iron. Valves and pumps should be bronze, cast-iron with bronze trim, or stainless steel. A pump of 3.15-L/s (50-gal/min) capacity unloads a tank car of warm glycerol in ca 4 h. 

The food industry uses stainless steel tubing or piping extensively for moving food products conventional steel, cast iron, copper, plastic, glass (qv), aluminum, and other alloys are used for utilities. 

ALkylamines are corrosive to copper, copper-containing alloys (brass), aluminum, 2inc, 2inc alloy, and galvani2ed surfaces. Aqueous solutions of aLkylamines slowly etch glass as a consequence of the basic properties of the amines in water. Carbon or stainless steel vessels and piping have been used satisfactorily for handling aLkylamines and, as noted above, some aLkylamines can act as corrosion inhibitors in boiler appHcations. 

DOT 17E phenolic-lined steel pails and dmms, respectively. Plain steel is not suitable for isopropyl alcohol containing water because msting can result. Instead, baked phenolic-lined steel tanks are used. Aluminum is also unsuitable. It is attacked by isopropyl alcohol, especially the anhydrous grade, resulting ia the formation of aluminum isopropoxide. Containers must comply with DOT specifications. Tanks, piping, and equipment can be made of similar material. 

Shipment, Stora.ge, ndPrice. l-Methyl-2-pyrrohdinone is available in tank cars or tank trailers as well as in dmms. Shipping containers are normally of unlined steel. Rubber hose is unsuitable for handling standard steel pipe or braided steel hose is acceptable. Ordinarily 1020 carbon steel (0550) is satisfactory as a storage material. Stainless-steel 304 and 316, nickel, and aluminum are also suitable. MethylpyrroHdinone is hygroscopic and must be protected from atmospheric moisture. In September 1994, NMP was Hsted at 3.89/kg. 

Methyl bromide, when dry (<100 ppm water), is inert toward most materials of constmction. Carbon steel is recommended for storage vessels, piping, pumps, valves, and fittings. Copper, brass, nickel, and its alloys are sometimes used. Aluminum, magnesium, zinc, and alloys of these metals should not be used because under some conditions dangerous pyrophoric compounds may be formed. Many nonmetallic materials are also useful for handling methyl bromide, but nylon and polyvinyl chloride should be avoided. 

As for storage tanks, stainless steel and lacquer-lined mild steel are suitable materials of constmction for pipe lines. For pumps, valves, etc, various alloys are suitable, including phosphor bronze, gun metal. Monel, stainless steel, and certain nickel steel alloys. Alloys with high proportions of ziac and tin together with copper and aluminum are not recommended. 

Chlorosulfuric acid attacks brass, bronze, lead, and most other nonferrous metals. From a corrosion standpoint, carbon steel and cast Hon are acceptable below 35°C provided color and Hon content is not a concern. Stainless steels (300-series) and certain aluminum alloys are acceptable materials of constmction, as is HasteUoy. Glass, glass-lined steel, or Teflon-lined piping and equipment are the preferred materials at elevated temperatures and/or high velocities or where trace Hon contamination is a problem, such as in the synthetic detergent industry. 

Piping—carbon steel, alloy, cast iron, lead-lined, aluminum, copper. Purchasing, expediting, and traffic... 

Aluminum pipe is stocked in 3003, 6061, and 6063 Schedule 40 through 10 in. Schedule 30, 8 through 10 in, and standard-weight 12-in size. It is also stocked in 6063 as Schedule 5 through 6 in and Schedule 10 through 8 in (see Table 10-18). 

Flexible Metal Hose Deeply corrugated thin brass, bronze, Monel, aluminum, and steel tubes are covered with flexible braided-wire jackets to form flexible metal hose. Both tube and braid are brazed or welded to pipe-thread, union, or flanged ends. Failures are often the result of corrosion of the braided-wire jacket or of a poor... 

Materials of Construction for Bulk Transport Because of the more severe service, construction materials for transportation usually are more restricted than for storage. Most large pipe lines are constructed of steel conforming to API Specification 5L or 5LX. Most tanks (cars, etc.) are built or pressure-vessel steels or AAR specification steels, with a few of aluminum or stainless steel. Carbon steel tanks may be hned with rubber, plastic, nickel, glass, or other materials. In many cases this is practic and cheaper than using a stainless-steel tank. Other materials for tank construction may be proposed and used if approved by the appropriate authorities (AAR and DOT). 

External Coils and Tracers Tanks, vessels, and pipe hnes can be equipped for heating or cooling purposes with external coils. These are generally 9.8 to 19 mm (% to V4 in) so as to provide good distribution over the surface and are often of soft copper or aluminum, which can be bent by hand to the contour of the tank or hne. When necessary to avoid hot spots, the tracer is so mounted that it does not touch the tank. 

---