Oleates

The following values for the surface tension of a 10 Af solution of sodium oleate at 25°C are reported by various authors (a) by the capillary rise method, y - 43 mN/m (b) by the drop weight method, 7 = 50 mN/m and (c) by the sessile drop method, 7 = 40 mN/m. Explain how these discrepancies might arise. Which value should be the most reliable and why ... [Pg.41]

If the third substance dissolves in both liquids (and the solubility in each of the liquids is of the same order), the mutual solubility of the liquids will be increased and an upper C.S.T. will be lowered, as is the case when succinic acid or sodium oleate is added to the phenol - water system. A 0 083 molar solution of sodium oleate lowers the C.S.T. by 56 -7° this large effect has been applied industrially in the preparation of the disinfectant sold under the name of Lysol. Mixtures of tar acids (phenol cresols) do not mix completely with water at the ordinary temperature, but the addition of a small amount of soap ( = sodium oleate) lowers the miscibility temperature so that Lysol exists as a clear liquid at the ordinary temperature. [Pg.20]

Metal-matrix composites Metal membranes Metal-metal bonds Metal naphthenates Metal oleates... [Pg.609]

X 10 M sodium oleate 1.5 X 10 M sodium oleate 10 M sodium oleate, pH = 8.1 10 Af potassium ethyl xanthate water... [Pg.43]

Fig. 16. Two-hquid flotation flow sheet (39). The original ROM is kaolin (white clay) that contains 11% impurity in the form of mica, anatase, and siUca. Treatment produces high purity kaolin and a Ti02-rich fraction. A, Kaolin stockpile D, dispersant (sodium siUcate plus alkah) W, water K, kerosene C, collector (sodium oleate) RK, recycled kerosene S, screen M, inline mixer SPR, separator CFG, centrifuge P, product and T, to waste.

$Fig. 16. Two-hquid flotation flow sheet (39). The original ROM is kaolin (white clay) that contains 11% impurity in the form of mica, anatase, and siUca. Treatment produces high purity kaolin and a Ti02-rich fraction. A, Kaolin stockpile D, dispersant (sodium siUcate plus alkah) W, water K, kerosene C, collector (sodium oleate) RK, recycled kerosene S, screen M, inline mixer SPR, separator CFG, centrifuge P, product and T, to waste.$

An ammoniacal solution is added just before use to activate the hydrogen peroxide. Ammonia is preferred over sodium carbonate (40) or ethanolamines for maximum bleaching. The alkaline solution can be formulated iato a shampoo vehicle with oleate soaps or ethoxylated fatty alcohols. When the bleach is appHed to areas such as new hair growth, a viscous cream or paste may be preferred, formulated with fatty alcohols, alkanolamides, or other thickeners. [Pg.458]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...