Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Hexanol-hexadecane-potassium oleate system, water

Variation of k with for the system water/hexadecane/potassium oleate/hexanol. [Pg.358]

Fig. 7. Variations of the low frequency permittivity with increasing water mass fraction in water-hexadecane systems using potassium oleate and 1-hexanol combined with the mass ratio 3/5, for different values of p, the hexa-decane mass fraction. Temperature T = 25°C. Fig. 7. Variations of the low frequency permittivity with increasing water mass fraction in water-hexadecane systems using potassium oleate and 1-hexanol combined with the mass ratio 3/5, for different values of p, the hexa-decane mass fraction. Temperature T = 25°C.
Conductivity measurements were also used to study the structure of the microemulsion, which is influenced by the nature of the cosurfactant. This can be shown (Figure 10.14) for two systems, one based on water-toluene-potassium oleate-butanol and the other on water-hexadecane-potassium oleate-hexanol [17]. The two systems differ in the nature of the cosurfactant, namely butanol (C4 alcohol) and hexanol (Ce alcohol). [Pg.329]

In a series of papers published a few years ago (39-41), Shah and co-workers reported data gained from correlated conductivity, birefringence, interfacial tension and NMR investigations performed on water-hexadecane systems using potassium oleate and hexanol as... [Pg.201]

Another promising issue of electrical studies is the observation made by different groups of workers (30,31,42,43) that the alcohol chain length has a drastic influence upon the conductive behavior of w/o microemulsions using alkaline metal soap/alcohol combinations as surface-active agents. For instance, Shah and co-workers (42,43) reported that water-in-hexadecane systems involving potassium oleate and either 1-hexanol or 1-pentanol ex-... [Pg.202]

Complementary conductance experiments were made with a view to investigate the influence of the cosurfactant upon microemulsion conductive properties. Comparative Type 3 measurements were performed on water-in-hexadecane systems using potassium oleate combined in the 3/5 mass ratio with either 1-pentanol or 1-hexanol. [Pg.213]

Fig, 11. Comparative conductive behavior of water-in-hexadecane systems using potassium oleate as the surfactant and either 1-pentanol or 1-hexanol. Soap to alcohol mass ratio equal to 3/5. Combined soap and alcohol mass fraction p equal to 0.40. represents the water volume fraction. Temperature T = 25°C. [Pg.216]


See other pages where Hexanol-hexadecane-potassium oleate system, water is mentioned: [Pg.98]    [Pg.165]    [Pg.206]    [Pg.210]    [Pg.212]    [Pg.217]    [Pg.202]    [Pg.202]    [Pg.203]    [Pg.204]   
See also in sourсe #XX -- [ Pg.91 ]




SEARCH



1- Hexanol

Hexadecan

Hexadecanal

Hexadecane

Hexadecane-potassium oleate

Hexanol-hexadecane-potassium

Hexanols

Oleates

Potassium Water

Potassium oleate

© 2024 chempedia.info