Carbon nucleophilic substitution

The substitutions with nucleophilic radicals become particularly interesting only with electron-deficient aromatic substrates, as the ionic nucleophilic substitutions. Carbon free radicals are the most common nucleophilic radicals and they are obviously among the most important organic free radicals. Heteroaromatic bases on the other hand are electron-deficient aromatic substrates which readily react with nucleophilic species. The protonation of heteroaromatic bases strongly increases their electron-deficient nature and therefore the reactivity towards nucleophilic reagents, while the reactivity towards electrophilic species is strongly... 

Nucleophilic substitution. Carbon nucleophiles react with the Cr(CO)3 complex of indanc followed by oxidative decomplexation (iodine) to effect highly selective or exclusive substitution a to the ring junction. Similar but less pronounced selectivity obtains in reactions of the Cr(CO)i complex of 1,2,3,4-tetrahydronaphthalenc. Good but... 

Terminal alkyne anions are popular reagents for the acyl anion synthons (RCHjCO"). If this nucleophile is added to aldehydes or ketones, the triple bond remains. This can be con verted to an alkynemercury(II) complex with mercuric salts and is hydrated with water or acids to form ketones (M.M.T. Khan, 1974). The more substituted carbon atom of the al-kynes is converted preferentially into a carbonyl group. Highly substituted a-hydroxyketones are available by this method (J.A. Katzenellenbogen, 1973). Acetylene itself can react with two molecules of an aldehyde or a ketone (V. jager, 1977). Hydration then leads to 1,4-dihydroxy-2-butanones. The 1,4-diols tend to condense to tetrahydrofuran derivatives in the presence of acids. 

Epoxide opening with nucleophiles occurs at the less substituted carbon atom of the oxlrane ting. Cataiytic hydrogenolysis yields the more substituted alcohol. The scheme below contains also an example for trons-dibromination of a C—C double bond followed by dehy-drobromination with strong base for overall conversion into a conjugated diene. The bicycKc tetraene then isomerizes spontaneously to the aromatic l,6-oxido[l0]annulene (E. Vogel, 1964). 

Pd(II) compounds coordinate to alkenes to form rr-complexes. Roughly, a decrease in the electron density of alkenes by coordination to electrophilic Pd(II) permits attack by various nucleophiles on the coordinated alkenes. In contrast, electrophilic attack is commonly observed with uncomplexed alkenes. The attack of nucleophiles with concomitant formation of a carbon-palladium r-bond 1 is called the palladation of alkenes. This reaction is similar to the mercuration reaction. However, unlike the mercuration products, which are stable and isolable, the product 1 of the palladation is usually unstable and undergoes rapid decomposition. The palladation reaction is followed by two reactions. The elimination of H—Pd—Cl from 1 to form vinyl compounds 2 is one reaction path, resulting in nucleophilic substitution of the olefinic proton. When the displacement of the Pd in 1 with another nucleophile takes place, the nucleophilic addition of alkenes occurs to give 3. Depending on the reactants and conditions, either nucleophilic substitution of alkenes or nucleophilic addition to alkenes takes place. 

An important method for construction of functionalized 3-alkyl substituents involves introduction of a nucleophilic carbon synthon by displacement of an a-substituent. This corresponds to formation of a benzylic bond but the ability of the indole ring to act as an electron donor strongly influences the reaction pattern. Under many conditions displacement takes place by an elimination-addition sequence[l]. Substituents that are normally poor leaving groups, e.g. alkoxy or dialkylamino, exhibit a convenient level of reactivity. Conversely, the 3-(halomethyl)indoles are too reactive to be synthetically useful unless stabilized by a ring EW substituent. 3-(Dimethylaminomethyl)indoles (gramine derivatives) prepared by Mannich reactions or the derived quaternary salts are often the preferred starting material for the nucleophilic substitution reactions. 

Bromide ion forms a bond to the primary carbon by pushing off a water molecule This step IS bimolecular because it involves both bromide and heptyloxonium ion Step 2 IS slower than the proton transfer m step 1 so it is rate determining Using Ingold s ter mmology we classify nucleophilic substitutions that have a bimolecular rate determining step by the mechanistic symbol Sn2... 

Nucleophilic substitution reactions of alkyl halides are related to elimination reactions m that the halogen acts as a leaving group on carbon and is lost as an anion The... 

The order of alkyl halide reactivity in nucleophilic substitutions is the same as their order m eliminations Iodine has the weakest bond to carbon and iodide is the best leaving group Alkyl iodides are several times more reactive than alkyl bromides and from 50 to 100 times more reactive than alkyl chlorides Fluorine has the strongest bond to car bon and fluonde is the poorest leaving group Alkyl fluorides are rarely used as sub states m nucleophilic substitution because they are several thousand times less reactive than alkyl chlorides... 

FIGURE 8 1 Two contrast mg stereochemical pathways for substitution of a leaving group (red) by a nucleophile (blue) In (a) the nucleophile attacks carbon at the same side from which the leaving group departs In (b) nude ophilic attack occurs at the side opposite the bond to the leaving group... 

FIGURE 8 2 Hybrid orbital description of the bonding changes that take place at carbon during nucleophilic substitution by the Sn2 mechanism... 

Although this mechanistic picture developed from experiments involving optically active alkyl halides chemists speak even of methyl halides as undergoing nucleophilic substitution with inversion By this they mean that tetrahedral inversion of the bonds to carbon occurs as the reactant proceeds to the product... 

An advantage that sulfonate esters have over alkyl halides is that their prepara tion from alcohols does not involve any of the bonds to carbon The alcohol oxygen becomes the oxygen that connects the alkyl group to the sulfonyl group Thus the configuration of a sulfonate ester is exactly the same as that of the alcohol from which It was prepared If we wish to study the stereochemistry of nucleophilic substitution m an optically active substrate for example we know that a tosylate ester will have the same configuration and the same optical purity as the alcohol from which it was prepared... 

Anions of acetylene and terminal alkynes are nucleophilic and react with methyl and primary alkyl halides to form carbon-carbon bonds by nucleophilic substitution Some useful applications of this reaction will be discussed m the following section... 

Unlike elimination and nucleophilic substitution reactions foimation of oigano lithium compounds does not require that the halogen be bonded to sp hybndized carbon Compounds such as vinyl halides and aiyl halides m which the halogen is bonded to sp hybndized carbon react m the same way as alkyl halides but at somewhat slowei rates... 

A long standing method for the preparation of ethers is the Williamson ether synthesis Nucleophilic substitution of an alkyl halide by an alkoxide gives the carbon-oxygen bond of an ether... 

Next in what amounts to an intramolecular Williamson ether synthesis the alkoxide oxygen attacks the carbon that bears the halide leaving group giving an epoxide As m other nucleophilic substitutions the nucleophile approaches carbon from the side oppo site the bond to the leaving group... 

Overall the stereospecificity of this method is the same as that observed m per oxy acid oxidation of alkenes Substituents that are cis to each other m the alkene remain CIS m the epoxide This is because formation of the bromohydrm involves anti addition and the ensuing intramolecular nucleophilic substitution reaction takes place with mver Sion of configuration at the carbon that bears the halide leaving group... 

There is an important difference in the regiochemistry of ring opening reactions of epoxides depending on the reaction conditions Unsymmetncally substituted epoxides tend to react with anionic nucleophiles at the less hindered carbon of the ring Under conditions of acid catalysis however the more highly substituted carbon is attacked... 

A naturally occurring sulfonium salt S adenosylmethionme (SAM) is a key sub stance in certain biological processes It is formed by a nucleophilic substitution m which the sulfur atom of methionine attacks the primary carbon of adenosine triphosphate dis placing the triphosphate leaving group as shown m Figure 16 7... 

Section 16 12 Anionic nucleophiles usually attack the less substituted carbon of the epoxide m an 8 2 like fashion... 

The critical carbon-carbon bond forming step requires nucleophilic substitution on an alkyl halide by an ester enolate Methyl halides are more reactive than... 

Because nitriles can be prepared from alkyl halides by nucleophilic substitution with cyanide ion the overall process RX RC=N RCH2NH2 leads to primary amines that have one more carbon atom than the starting alkyl halide... 

Isopentenyl pyrophosphate and dimethylallyl pyrophosphate are structurally sim liar—both contain a double bond and a pyrophosphate ester unit—but the chemical reactivity expressed by each is different The principal site of reaction m dimethylallyl pyrophosphate is the carbon that bears the pyrophosphate group Pyrophosphate is a reasonably good leaving group m nucleophilic substitution reactions especially when as in dimethylallyl pyrophosphate it is located at an allylic carbon Isopentenyl pyrophosphate on the other hand does not have its leaving group attached to an allylic carbon and is far less reactive than dimethylallyl pyrophosphate toward nucleophilic reagents The principal site of reaction m isopentenyl pyrophosphate is the carbon-carbon double bond which like the double bonds of simple alkenes is reactive toward electrophiles... 

Inversion of configuration (Section 8 4) Reversal of the three dimensional arrangement of the four bonds to sp hybridized carbon The representation shown illustrates inversion of configuration in a nucleophilic substitution where LG is the leaving group and Nu is the nucleophile... 

Nucleophilic acyl substitution (Section 20 3) Nucleophilic substitution at the carbon atom of an acyl group... 

Nucleophilic Reactions. The strong electronegativity of fluorine results in the facile reaction of perfluoroepoxides with nucleophiles. These reactions comprise the majority of the reported reactions of this class of compounds. Nucleophilic attack on the epoxide ring takes place at the more highly substituted carbon atom to give ring-opened products. Fluorinated alkoxides are intermediates in these reactions and are in equiUbrium with fluoride ion and a perfluorocarbonyl compound. The process is illustrated by the reaction of methanol and HFPO to form methyl 2,3,3,3-tetrafluoro-2-methoxypropanoate (eq. 4). 

Nucleophilic Ring Opening. Opening of the ethyleneimine ring with acid catalysis can generally be accompHshed by the formation of an iatermediate ayiridinium salt, with subsequent nucleophilic substitution on the carbon atom which loses the amino group. In the foUowiag, R represents a Lewis acid, usually A = the nucleophile. 

Monomer Reactivity. The poly(amic acid) groups are formed by nucleophilic substitution by an amino group at a carbonyl carbon of an anhydride group. Therefore, the electrophilicity of the dianhydride is expected to be one of the most important parameters used to determine the reaction rate. There is a close relationship between the reaction rates and the electron affinities, of dianhydrides (12). These were independendy deterrnined by polarography. Stmctures and electron affinities of various dianhydrides are shown in Table 1. 

Nucleophilic Substitution Route. Commercial synthesis of poly(arylethersulfone)s is accompHshed almost exclusively via the nucleophilic substitution polycondensation route. This synthesis route, discovered at Union Carbide in the early 1960s (3,4), involves reaction of the bisphenol of choice with 4,4 -dichlorodiphenylsulfone in a dipolar aprotic solvent in the presence of an alkaUbase. Examples of dipolar aprotic solvents include A/-methyl-2-pyrrohdinone (NMP), dimethyl acetamide (DMAc), sulfolane, and dimethyl sulfoxide (DMSO). Examples of suitable bases are sodium hydroxide, potassium hydroxide, and potassium carbonate. In the case of polysulfone (PSE) synthesis, the reaction is a two-step process in which the dialkah metal salt of bisphenol A (1) is first formed in situ from bisphenol A [80-05-7] by reaction with the base (eg, two molar equivalents of NaOH),... 

Delignification Chemistty. The chemical mechanism of sulfite delignification is not fully understood. However, the chemistry of model compounds has been studied extensively, and attempts have been made to correlate the results with observations on the rates and conditions of delignification (61). The initial reaction is sulfonation of the aUphatic side chain, which occurs almost exclusively at the a-carbon by a nucleophilic substitution. The substitution displaces either a hydroxy or alkoxy group ... 

Carbonates undergo nucleophilic substitution reactions analogous to chloroformates except in this case, an OR group (rather than chloride) is replaced by a more basic group. Normally these reactions are cataly2ed by bases. Carbonates are sometimes preferred over chloroformates because formation of hydrogen chloride as a by-product is avoided, which simplifies handling. However, the reactivity of carbonates toward nucleophiles is considerably less than chloroformates. 

---