Nucleophilic substitution reactions dimethyl carbonate

In contrast with the reactions involving sulphide or hydrogen sulphide anions, aryl alkyl thioethers and unsymmetrical dialkyl thioethers (Table 4.3) are obtained conveniently by the analogous nucleophilic substitution reactions between haloalkanes and aryl or alkylthiols under mildly basic conditions in the presence of a quaternary ammonium salt [9-15] or polymer-supported quaternary ammonium salt [16]. Dimethyl carbonate is a very effective agent in the formation of methyl thioethers (4.1.4.B) [17]. 

RCO , an indifferent nucleophile in prohc solvents, enjoys a large rate enhancement, permitting rapid alkylation with haloalkanes in hexamethylphosphoric triamide [301, 302], When the Williamson ether synthesis is carried out in dimethyl sulfoxide [303], the yields are raised and the reaction time shortened. Displacements on unreactive haloarenes become possible [304] (conversion of bromobenzene to tert-butoxybenzene with tert-C UgO in dimethyl sulfoxide in 86% yield at room temperature). The fluoride ion, a notoriously poor nucleophile or base in protic solvents, reveals its hidden capabilities in dipolar non-HBD solvents and is a powerful nucleophile in substitution reactions on carbon [305],... 

The polymerizations require the use of dipolar aprotic solvents such as N-methylpyrrolidone (NMP), dimethyl acetamide (DMAC), dimethyl sulfoxide (DMSO) or N,N -dimethylpropylene urea (DMPU). Nucleophilic aromatic substitution polymerizations are t q>ically performed in a high boiling aprotic polar solvent with the monomer(s) reacted in the presence of a base, potassium carbonate, at elevated temperatures (ca. 180 C). Potassium carbonate is used to convert the phenol into the potassium phenolate and since K2CO3 is a weak base, no hydrolytic side reactions are observed. Dipolar aprotic solvents are used in these poly(aryl ether) syntheses, since they effectively dissolve the monomers and solvate the polar intermediates and the final polymer. DMPU has been shown to be an excellent solvent for poly(ether) syntheses, particularly for those polymers which are only marginally soluble in other dipolar aprotic solvents (22). Furthermore, DMPU allows higher reaction temperatures (260 C). We have observed that DMPU, when used in conjunction with toluene as a dehydrating agent, accelerates many nucleophilic substitution reactions. 

Demethylation of poly(sulfonium cation) occurs by nucleophile substitution reaction via Sn2 mechanism The demethylation is also classified as a transmethylation to nucleophiles. Using nucleophiles that have a mobile proton such as phenol, aniline and benzoic acid derivatives in the presence of potassium carbonate, demediyladon of poly( sulfonium cation) proceeds efficiently to yield the methylated products of phenol and benzoic acid with 100 % conversion (Scheme 2). In the case of aniline, both N-methyl and M -dimethyl aniline are obtained and methylation of -methyl aniline occurs more easily than aniline because of the higher Lewis basicity. 

The formation of the above anions ("enolate type) depend on equilibria between the carbon compounds, the base, and the solvent. To ensure a substantial concentration of the anionic synthons in solution the pA" of both the conjugated acid of the base and of the solvent must be higher than the pAT -value of the carbon compound. Alkali hydroxides in water (p/T, 16), alkoxides in the corresponding alcohols (pAT, 20), sodium amide in liquid ammonia (pATj 35), dimsyl sodium in dimethyl sulfoxide (pAT, = 35), sodium hydride, lithium amides, or lithium alkyls in ether or hydrocarbon solvents (pAT, > 40) are common combinations used in synthesis. Sometimes the bases (e.g. methoxides, amides, lithium alkyls) react as nucleophiles, in other words they do not abstract a proton, but their anion undergoes addition and substitution reactions with the carbon compound. If such is the case, sterically hindered bases are employed. A few examples are given below (H.O. House, 1972 I. Kuwajima, 1976). 

Nucleophilic Substitution Route. Commercial synthesis of poly(arylethersulfone)s is accompHshed almost exclusively via the nucleophilic substitution polycondensation route. This synthesis route, discovered at Union Carbide in the early 1960s (3,4), involves reaction of the bisphenol of choice with 4,4 -dichlorodiphenylsulfone in a dipolar aprotic solvent in the presence of an alkaUbase. Examples of dipolar aprotic solvents include A/-methyl-2-pyrrohdinone (NMP), dimethyl acetamide (DMAc), sulfolane, and dimethyl sulfoxide (DMSO). Examples of suitable bases are sodium hydroxide, potassium hydroxide, and potassium carbonate. In the case of polysulfone (PSE) synthesis, the reaction is a two-step process in which the dialkah metal salt of bisphenol A (1) is first formed in situ from bisphenol A [80-05-7] by reaction with the base (eg, two molar equivalents of NaOH),... 

Another ring-opening substitution reaction was observed for tricyclane 55 the attack occurred exclusively at the tatiary carbon, not at the quaternary one. The chiral isomer 56, of the symmetrical 55, has two 3 -4 bonds either of which may be the site of spin and charge, possibly in an equilibrium. Regardless of the actual structure of the radical cation, it appears that the attack of the nucleophile is less hindered at the carbon further removed from the dimethyl-substituted bridge (approach a). The isolated product 57 is optically active, and formed by backside attack on the less hindered carbon. ... 

Proof that a site incapable of undergoing inversion is also incapable of undergoing a second-order substitution reaction has been obtained from bicyclic compounds. The bridgehead carbon of rigid bicyclic systems cannot invert without fragmenting the molecule, and indeed, compounds such as 1-bromotripty-cene (2) and 7,7-dimethyl-[2.2.1. ]-bicycloheptyl-T/i-toluencsulfonate (3) are completely inert when treated with a nucleophile under conditions.14... 

Allenes are activated by a diphenylphosphine oxide substituent towards nucleophilic substitution at the j3-carbon atom. Lithium dimethyl-cuprate adds quickly to the 1,2-bond to give, on hydrolysis, the olefin in 16-84% yield, according to the nature of the substituents (76). Optimum conditions were not reported. The intermediate a-copper compound resulting from the addition can be dimerized or reacted with methyl iodide [Eq. (106)]. Similar reactions involving methyllithium are complicated. 

Substitution reactions of allylic substrates with nucleophiles have been shown to be catalyzed by certain palladium complexes [2, 42], The catalytic cycle of the reactions involves Jt-allylpalladium as a key intermediate (Scheme 2-22). Oxidative addition of the allylic substrate to a palladium(o) species forms a rr-allylpal-ladium(n) complex, which undergoes attack of a nucleophile on the rr-allyl moiety to give an allylic substitution product. The substitution reactions proceed in an Sn or Sn- manner depending on catalysts, nucleophiles, and substituents on the substrates. Studies on the stereochemistry of the allylic substitution have revealed that soft carbon nucleophiles represented by sodium dimethyl malonate attack the TT-allyl carbon directly from the side opposite to the palladium (Scheme 2-23). 

Pyrones also add Grignard nucleophiles at the carbonyl carbon, C-4 dehydration of the inunediate tertiary alcohol product with mineral acid provides an important route to 4-mono-substituted pyrylium salts." More vigorous conditions lead to the reaction of both 2- and 4-pyrones with two mole equivalents of organometallic reagent and the formation of 2,2-disubstituted-2H- and 4,4-disubstituted-4//-pyrans, respectively." Perhaps surprisingly, hydride (lithium aluminium hydride) addition to 4,6-dimethyl-2-pyrone takes place, in contrast, at C-b." ... 

Polysulfones Polysulfones are aromatic PEs made usually by the reaction of bisphenol A and bis (4-chlorophenyl) sulfone in a nucleophilic substitution condensation reaction. The first polysulfones produced by Union Carbide in the early 1960s involved the reaction of bisphenol with and bis(4-chlorophenyl) sulfone in the presence of an alkali base (NaOH, KOH, and K carbonate) in a dipolar aprotic solvent such as NMP, DMSO, sulfolane, or dimethyl acetamide [78], Typical temperatures are in the range of 130-160 °C. The reaction of the base with bis A generates water, which must be removed. 

Leitner and co-workers described Pd-catalyzed nucleophilic substitutions ofallylic substrates with different nucleophiles [27]. They used Pd2(dba)3 as the palladium source and phosphane 20 as perfluoro-tagged ligand [Eq. (5)]. Reaction between cinnamyl methyl carbonate (21) and various nucleophiles (Nu-H) were performed in a THF/C7FJ4 biphasic mixture. A decrease in conversion was observed only after the ninth run (with 5 mol% Pd complex). By reducing the amoimt of Pd complex to 1 mol%, five quantitative recyclings were possible. The standard protocol was also applied to the condensation of dimethyl malonate with allyl methyl carbonate, (2-vinyl)butyl carbonate, and cyclohex-2-enyl carbonate. In each case two recyclings were performed without any decrease in conversion. 

Nucleophilic additions to the carbon-carbon double bond of ketene dithioacetal monoxides have been reported [84-86]. These substrates are efficient Michael acceptors in the reaction with enamines, sodium enolates derived from P-dicarbonyl compounds, and lithium enolates from simple ester systems. Hydrolysis of the initiEil products then led to substituted 1,4-dicarbonyl systems [84]. Alternatively, the initial product carbanion could be quenched with electrophiles [85]. For example, the anion derived from dimethyl malonate (86) was added to the ketene dithioacetal monoxide (87). Regioselective electrophilic addition led to the product (88) in 97% overall yield (Scheme 5.28). The application of this methodology to the synthesis of rethrolones [87] and prostaglandin precursors [88] has been demonstrated. Recently, Walkup and Boatman noted the resistance of endocyclic ketene dithioacetals to nucleophilic attack [89]. 

---