Microscopic characterization/propertie

These include cold drawn, high pressure oriented chain-extended, solid slate extruded, die-drawn, and injection moulded polymers. Correlation of hardness to macroscopic properties is also examined. In summary, microhardness is shown to be a useful complementary technique of polymer characterization providing information on microscopic mechanical properties. 

Additional work being conducted in pharmaceutical groups includes chemical microscopical characterization of dilituric acid and its complexes (77), characterization of the physicochemical properties of pharmaceuticals (78), and solid-state investigations incorporating hot-stage microspectroscopy (79,80). 

The problem becomes more complex when studying solid phases because the microscopic NLO responses do not provide the full information about their macroscopic coimterparts, the second- and third-order nonlinear susceptibilities, and To make the transition between the microscopic and macroscopic, it is necessary to know the structure of the condensed phases as well as the nature and the effects of the intermolecular interactions in the bulk of the material. In both the Physics and Chemistry arena, several schemes have been proposed to characterize the NLO responses of solid phases. One of the authors has recently contributed to review these approaches [3] of which one of the extremes is occupied by the oriented gas approximation that consists in performing a tensor sum of the microscopic NLO properties to obtain the macroscopic responses of the crystal. The other extreme consists in performing a complete treatment of the solid by using the supermolecule method or by taking advantage of the spatial periodicity in crystal orbital calculations. In between these techniques, one finds the interaction schemes and the semi-empirical approaches. 

Recently, the investigation of polymer brushes has been focused on the synthesis of new tethered polymer systems primarily through surface-initiated polymerization (SIP). Previously, the term polymer brushes has been limited to the investigation of block copolymers (qv) or end-functional linear polymers that have been physically or chemically adsorbed to surfaces, respectively (3,4). Recent synthetic efforts using different polymerization mechanisms have resulted in the discovery of many novel properties of polymer brushes. This has been aided no less than the use of innovative and unique surface-sensitive analysis methods as applied to flat substrates and particles. The study of polymer brushes has benefited from improved dielectric, optical, spectroscopic, and microscopic characterization methods. Understanding the chemistry of these grafting reactions and how... 

Several review papers discuss the preparation, characterization, properties, and applications of bio-nanocomposites (Pandey et al., 2005 Ray and Bousmina, 2005 Yang et al, 2007 Rhim and Ng, 2007 Sorrentino et al., 2007 Zhao et al., 2008 Bordes et al., 2009). However, there is a lack of comprehensive review on various analytical techniques for the stmctural characterization of bio-nanocomposites. Selection of proper technique for characterization of these bio-nanocomposites is very critical in assessing their performance. A number of analytical techniques have been used to characterize the stracture of bio-nanocomposites. These techniques include X-ray diffraction (XRD), microscopy transmission electron microscope (TEM), scanning electron microscope (SEM), scanning probe microscope (SPM), and confocal scanning laser microscope (CSLM), Fourier transform infra-red (FTIR) spectroscopy, and nuclear magnetic resonance (NMR). Each of the above mentioned techniques has its own benefits and limitations. 

A beautiful and elegant example of the intricacies of surface science is the formation of transparent, thermodynamically stable microemulsions. Discovered about 50 years ago by Winsor [76] and characterized by Schulman [77, 78], microemulsions display a variety of useful and interesting properties that have generated much interest in the past decade. Early formulations, still under study today, involve the use of a long-chain alcohol as a cosurfactant to stabilize oil droplets 10-50 nm in diameter. Although transparent to the naked eye, microemulsions are readily characterized by a variety of scattering, microscopic, and spectroscopic techniques, described below. 

The technological importance of thin films in snch areas as semicondnctor devices and sensors has led to a demand for mechanical property infonnation for these systems. Measuring the elastic modnlns for thin films is mnch harder than the corresponding measurement for bnlk samples, since the results obtained by traditional indentation methods are strongly perturbed by the properties of the substrate material. Additionally, the behaviour of the film under conditions of low load, which is necessary for the measnrement of thin-film properties, is strongly inflnenced by surface forces [75]. Since the force microscope is both sensitive to surface forces and has extremely high depth resolntion, it shows considerable promise as a teclnhqne for the mechanical characterization of thin films. 

The typical industrial catalyst has both microscopic and macroscopic regions with different compositions and stmctures the surfaces of industrial catalysts are much more complex than those of the single crystals of metal investigated in ultrahigh vacuum experiments. Because surfaces of industrial catalysts are very difficult to characterize precisely and catalytic properties are sensitive to small stmctural details, it is usually not possible to identify the specific combinations of atoms on a surface, called catalytic sites or active sites, that are responsible for catalysis. Experiments with catalyst poisons, substances that bond strongly with catalyst surfaces and deactivate them, have shown that the catalytic sites are usually a small fraction of the catalyst surface. Most models of catalytic sites rest on rather shaky foundations. 

Biological membranes provide the essential barrier between cells and the organelles of which cells are composed. Cellular membranes are complicated extensive biomolecular sheetlike structures, mostly fonned by lipid molecules held together by cooperative nonco-valent interactions. A membrane is not a static structure, but rather a complex dynamical two-dimensional liquid crystalline fluid mosaic of oriented proteins and lipids. A number of experimental approaches can be used to investigate and characterize biological membranes. However, the complexity of membranes is such that experimental data remain very difficult to interpret at the microscopic level. In recent years, computational studies of membranes based on detailed atomic models, as summarized in Chapter 21, have greatly increased the ability to interpret experimental data, yielding a much-improved picture of the structure and dynamics of lipid bilayers and the relationship of those properties to membrane function [21]. 

Solvent effects on chemical equilibria and reactions have been an important issue in physical organic chemistry. Several empirical relationships have been proposed to characterize systematically the various types of properties in protic and aprotic solvents. One of the simplest models is the continuum reaction field characterized by the dielectric constant, e, of the solvent, which is still widely used. Taft and coworkers [30] presented more sophisticated solvent parameters that can take solute-solvent hydrogen bonding and polarity into account. Although this parameter has been successfully applied to rationalize experimentally observed solvent effects, it seems still far from satisfactory to interpret solvent effects on the basis of microscopic infomation of the solute-solvent interaction and solvation free energy. 

A microscopic description characterizes the structure of the pores. The objective of a pore-structure analysis is to provide a description that relates to the macroscopic or bulk flow properties. The major bulk properties that need to be correlated with pore description or characterization are the four basic parameters porosity, permeability, tortuosity and connectivity. In studying different samples of the same medium, it becomes apparent that the number of pore sizes, shapes, orientations and interconnections are enormous. Due to this complexity, pore-structure description is most often a statistical distribution of apparent pore sizes. This distribution is apparent because to convert measurements to pore sizes one must resort to models that provide average or model pore sizes. A common approach to defining a characteristic pore size distribution is to model the porous medium as a bundle of straight cylindrical or rectangular capillaries (refer to Figure 2). The diameters of the model capillaries are defined on the basis of a convenient distribution function. 

Network properties and microscopic structures of various epoxy resins cross-linked by phenolic novolacs were investigated by Suzuki et al.97 Positron annihilation spectroscopy (PAS) was utilized to characterize intermolecular spacing of networks and the results were compared to bulk polymer properties. The lifetimes (t3) and intensities (/3) of the active species (positronium ions) correspond to volume and number of holes which constitute the free volume in the network. Networks cured with flexible epoxies had more holes throughout the temperature range, and the space increased with temperature increases. Glass transition temperatures and thermal expansion coefficients (a) were calculated from plots of t3 versus temperature. The Tgs and thermal expansion coefficients obtained from PAS were lower titan those obtained from thermomechanical analysis. These differences were attributed to micro-Brownian motions determined by PAS versus macroscopic polymer properties determined by thermomechanical analysis. 

Microscopic techniques are extensively used to study the surface morphology of reinforcing fibers. The characterization of microstructure of polymer fibers provides an insight into stmcture-property relationship of the fiber. Microscopy techniques have been employed for the... 

All the macroscopic properties of polymers depend on a number of different factors prominent among them are the chemical structures as well as the arrangement of the macromolecules in a dense packing [1-6]. The relationships between the microscopic details and the macroscopic properties are the topics of interest here. In principle, computer simulation is a universal tool for deriving the macroscopic properties of materials from the microscopic input [7-14]. Starting from the chemical structure, quantum mechanical methods and spectroscopic information yield effective potentials that are used in Monte Carlo (MC) and molecular dynamics (MD) simulations in order to study the structure and dynamics of these materials on the relevant length scales and time scales, and to characterize the resulting thermal and mechanical proper-... 

In summary, the new 2D experiments of relaxation and diffusion appear to offer a new method to identify and quantify the components in dairy products. The two components are well separated in the 2D maps while they can be heavily overlapped in the ID spectrum. We find that some microscopic properties of the products can be reflected in the relaxation and diffusion properties. These new techniques are likely to be useful to assist the characterization of the products for quality control and quality assurance. 

---