Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Basicity parameter

The use of experimental X-ray vidicons, original technique of X-raying and computer image processing allowed to improve basic parameters of XTVI and to achieve higher defectoscopic sensitivity and greater thickness of X-rayed materials and products. [Pg.450]

It should be recognized that the total volume of wastewater as well as the chemical analyses iadicating the organic and inorganic components are requited, backed by statistical validity, before the conceptualizing of the overall treatment plant design can begia. The basic parameters ia wastewater characterization are summarized ia Table 2. [Pg.177]

In multiyear process ventures, the money flows are more compHcated and must be discounted to a common point in time before they can be combined. However, the three basic parameters, investment, return, and rate of return, should be retained in some logical and consistent manner. [Pg.445]

Deposition Origin of force field Basic parameter Specific modifying parameters System parameters... [Pg.1583]

In the above schemes the two quantities (/ and / ,) are not separated. Initially it w as not easy to separate them and the whole phasor ( was varied to achieve a speed variation. Yet close speed control was possible but the motor s basic parameters were essential to achieve more accurate speed control. Since it may not be practical to obtain all the parameters of each motor promptly, the drive software is designed so that the name plate particulars ofa motor (V, N, and kW) alone arc enough to determine the machine s required parameters through the motor s... [Pg.105]

With different approaches to monitor and control the basic parameters of the motor, i.c. 4, /, and sin 6, many tnorc alternatives arc possible to achieve the required speed variation in an a.c. machine. Control of these parameters by the use of an encoder can provide an accuracy in speed control as good as a d.c. machine and even better. [Pg.107]

As discussed above we establish two basic parameters from a short-time withstand test, i.e. [Pg.433]

This is the response spectrum, constructed for a particular location, for a future earthquake. It is based on seismic studies conducted for that region and past seismic records of and around that region, if available. It forms the basic parameters for the design and testing of an object. [Pg.441]

Assuming that the above change in the excitation causes the following changes in the basic parameters... [Pg.518]

Besides the three basic parameters noted above, the incoming machine must also be running a little too fast compared to the existing source, i.e. /, >/j or />, at the instant of synchronization. If it is not. it will further stress an already overstressed source. When the incoming... [Pg.525]

By altering a and K, the arrester can he designed for any conducting voltage (V es) and nominal current discharge (/ ). Ure and / define the basic parameters of a surge arrester, as discussed later. Eigures 18.4(a) and (b)... [Pg.591]

To determine the basic parameters of a 6% series reactor and its capacitive compensation, consider Example 23.6 with 3000 kVAr banks (1000 kVAr per phase) rated for 33.4 kV ... [Pg.747]

We have summarized in Table 25.2 the basic parameters to select the correct type of components for capacitor duty. [Pg.818]

Current rating varies with the surface area of a conduelor and its thickness (annulus). In our sample calculation, to establish the basic parameters of the conductor and the enclosure, we have considered the current density for both as 400 A/inch. ... [Pg.944]

The efficiency of expansion turbines (partial admission axial, full admission axial, and radial inflow turbines) is a function of the following four basic parameters. [Pg.36]

A microscopic description characterizes the structure of the pores. The objective of a pore-structure analysis is to provide a description that relates to the macroscopic or bulk flow properties. The major bulk properties that need to be correlated with pore description or characterization are the four basic parameters porosity, permeability, tortuosity and connectivity. In studying different samples of the same medium, it becomes apparent that the number of pore sizes, shapes, orientations and interconnections are enormous. Due to this complexity, pore-structure description is most often a statistical distribution of apparent pore sizes. This distribution is apparent because to convert measurements to pore sizes one must resort to models that provide average or model pore sizes. A common approach to defining a characteristic pore size distribution is to model the porous medium as a bundle of straight cylindrical or rectangular capillaries (refer to Figure 2). The diameters of the model capillaries are defined on the basis of a convenient distribution function. [Pg.65]

The basic parameter characterizing supercoiled DNA is the linking number (L). This is the number of times the two strands are intertwined, and, provided both strands remain covalently intact, L cannot change. In a relaxed circular... [Pg.375]

During a project s life, planners and management should focus on three basic parameters quality, time and cost see Figure 51.2. A successfully planned and managed project is one that is completed at the specified level of quality, on or before the deadline, and within budget. [Pg.820]

If the basic relation (Eq. 11.32) is not satisfied for r = 1, we will make the substitution p = rjR, and consider p as an auxiliary basic parameter in which everything is expressed. Solving with respect to rj, we obtain... [Pg.222]

Asymmetry of the structure is one of the basic parameters responsible for the coulomb staircase phenomenon (Shonenberger et al. 1992b). As we have said previously, it is absolutely necessary to have an asymmetrical system in order to observe stephke V-I characteristics. [Pg.180]

The present approach has been applied to the experiment done by Nelsen et ah, [112], which is a measurement of the intramolecular electron transfer of 2,7-dinitronaphthalene in three kinds of solvents. Since the solvent dynamics effect is supposed to be unimportant in these cases, we can use the present theory within the effective ID model approach. The basic parameters are taken from the above reference except for the effective frequency. The results are shown in Fig. 26, which shows an excellent agreement with the experiment. The electronic couphng is quite strong and the perturbative treatment cannot work. The effective frequencies used are 1200, 950, and 800 cm for CH3CN, dimethylformamide (DMF), and PrCN [113]. [Pg.148]

Figure 34. Contour map of the nonadiabatic transition probability Pn induced by quadratically chirped pulse as a function of the two basic parameters a and p. Taken from Ref. [37]-... Figure 34. Contour map of the nonadiabatic transition probability Pn induced by quadratically chirped pulse as a function of the two basic parameters a and p. Taken from Ref. [37]-...
The two-dimensionless basic parameters and in terms of the diabatic potentials are defined as... [Pg.196]

Seleetion of basic parameters of chromatographic process (stationary phase, proper pure solvents according to Snyder s classification, and vapor phase)... [Pg.92]

The satisfactory correlations between Kamlet-Abraham s acidity parameters and H-bond donor free energy factors, and between Kamlet-Abraham s basicity parameters and H-bond acceptor free energy factors for many sets of compounds [26] deserve particular mentioning ... [Pg.133]


See other pages where Basicity parameter is mentioned: [Pg.187]    [Pg.187]    [Pg.177]    [Pg.177]    [Pg.213]    [Pg.596]    [Pg.605]    [Pg.609]    [Pg.612]    [Pg.623]    [Pg.748]    [Pg.943]    [Pg.117]    [Pg.128]    [Pg.22]    [Pg.22]    [Pg.444]    [Pg.162]    [Pg.45]    [Pg.14]    [Pg.279]    [Pg.637]    [Pg.163]    [Pg.196]    [Pg.127]    [Pg.362]   
See also in sourсe #XX -- [ Pg.106 ]




SEARCH



Acidity and Basicity Parameters

Basic Mixture Parameters

Basic Parameters

Basic Parameters Controlling Speed and Resolution

Basic Parameters of Fuel Cells

Basic Statistical Parameters

Basic System Parameters

Basic Theoretical Parameters

Basic adsorption parameters

Basic chromatographic parameters

Basic design parameters

Basic dielectric parameters

Basic group parameters

Basic parameters and design optimization

Basic parameters and separation mechanisms

Basic thermodynamic functions and parameters

Basicity softness parameters

Computation of some Basic Parameters

Correspondence between basic quantities and theoretical parameters

Introduction to surfactants - basic properties, self-assembly and critical packing parameter (CPP)

Parameters, values, selected basic

Pressure-temperature parameters basic principles

Resolution basic parameters controlling

Speed basic parameters controlling

© 2024 chempedia.info