Methyl methacrylate, oxidation

The oxidative coupling of alkenes which have two substituents at the 2 posi-tion, such as isobutylene, styrene, 2-phenylpropene, 1,1-diphenylethylene, and methyl methacrylate, takes place to give the 1,1,4.4-tetrasubstituted butadienes 285 by the action of Pd(OAc)2 or PdCF in the presence of sodium acetate[255-257]. Oxidation of styrene with Pd(OAc)2 produces 1.4-diphenylbutadiene (285, R = H) as a main product and a- and /3-acetoxystyrenes as minor pro-ducts[258]. Prolonged oxidation of the primary coupling product 285 (R = Me) of 2-phenylpropene with an excess of Pd(OAc)2 leads slowly to p-... 

Poly(acrylic acid) and Poly(methacrylic acid). Poly(acryHc acid) (8) (PAA) may be prepared by polymerization of the monomer with conventional free-radical initiators using the monomer either undiluted (36) (with cross-linker for superadsorber appHcations) or in aqueous solution. Photochemical polymerization (sensitized by benzoin) of methyl acrylate in ethanol solution at —78° C provides a syndiotactic form (37) that can be hydrolyzed to syndiotactic PAA. From academic studies, alkaline hydrolysis of the methyl ester requires a lower time than acid hydrolysis of the polymeric ester, and can lead to oxidative degradation of the polymer (38). Po1y(meth acrylic acid) (PMAA) (9) is prepared only by the direct polymerization of the acid monomer it is not readily obtained by the hydrolysis of methyl methacrylate. 

Transesterification of methyl methacrylate with the appropriate alcohol is often the preferred method of preparing higher alkyl and functional methacrylates. The reaction is driven to completion by the use of excess methyl methacrylate and by removal of the methyl methacrylate—methanol a2eotrope. A variety of catalysts have been used, including acids and bases and transition-metal compounds such as dialkjitin oxides (57), titanium(IV) alkoxides (58), and zirconium acetoacetate (59). The use of the transition-metal catalysts allows reaction under nearly neutral conditions and is therefore more tolerant of sensitive functionality in the ester alcohol moiety. In addition, transition-metal catalysts often exhibit higher selectivities than acidic catalysts, particularly with respect to by-product ether formation. 

Polymer Blends. The miscibility of poly(ethylene oxide) with a number of other polymers has been studied, eg, with poly (methyl methacrylate) (18—23), poly(vinyl acetate) (24—27), polyvinylpyrroHdinone (28), nylon (29), poly(vinyl alcohol) (30), phenoxy resins (31), cellulose (32), cellulose ethers (33), poly(vinyl chloride) (34), poly(lactic acid) (35), poly(hydroxybutyrate) (36), poly(acryhc acid) (37), polypropylene (38), and polyethylene (39). 

Butyl alcohol is employed as a feedstock in Japan to make methyl methacrylate monomer. In one such process (26), the alcohol is oxidized (in two steps) to acryHc acid, which is then esterified with methanol. In a similar process (27), /-butyl alcohol is oxidized in the presence of ammonia to give methacrylonitrile [126-98-7]. The latter is hydrolyzed to methacrjiamide [79-39-0] which then reacts with methanol to yield methyl methacrylate [80-62-6]. 

The handling of toxic materials and disposal of ammonium bisulfate have led to the development of alternative methods to produce this acid and the methyl ester. There are two technologies for production from isobutylene now available ammoxidation to methyl methacrylate (the Sohio process), which is then solvolyzed, similar to acetone cyanohydrin, to methyl methacrylate and direct oxidation of isobutylene in two stages via methacrolein [78-85-3] to methacryhc acid, which is then esterified (125). Since direct oxidation avoids the need for HCN and NH, and thus toxic wastes, all new plants have elected to use this technology. Two plants, Oxirane and Rohm and Haas (126), came on-stream in the early 1980s. The Oxirane plant uses the coproduct tert-huty alcohol direcdy rather than dehydrating it first to isobutylene (see Methacrylic acid). 

The cadmium chalcogenide semiconductors (qv) have found numerous appHcations ranging from rectifiers to photoconductive detectors in smoke alarms. Many Cd compounds, eg, sulfide, tungstate, selenide, teUuride, and oxide, are used as phosphors in luminescent screens and scintiUation counters. Glass colored with cadmium sulfoselenides is used as a color filter in spectroscopy and has recently attracted attention as a third-order, nonlinear optical switching material (see Nonlinear optical materials). DiaLkylcadmium compounds are polymerization catalysts for production of poly(vinyl chloride) (PVC), poly(vinyl acetate) (PVA), and poly(methyl methacrylate) (PMMA). Mixed with TiCl, they catalyze the polymerization of ethylene and propylene. 

The performance of many metal-ion catalysts can be enhanced by doping with cesium compounds. This is a result both of the low ionization potential of cesium and its abiUty to stabilize high oxidation states of transition-metal oxo anions (50). Catalyst doping is one of the principal commercial uses of cesium. Cesium is a more powerflil oxidant than potassium, which it can replace. The amount of replacement is often a matter of economic benefit. Cesium-doped catalysts are used for the production of styrene monomer from ethyl benzene at metal oxide contacts or from toluene and methanol as Cs-exchanged zeofltes ethylene oxide ammonoxidation, acrolein (methacrolein) acryflc acid (methacrylic acid) methyl methacrylate monomer methanol phthahc anhydride anthraquinone various olefins chlorinations in low pressure ammonia synthesis and in the conversion of SO2 to SO in sulfuric acid production. 

The acetone supply is strongly influenced by the production of phenol, and so the small difference between total demand and the acetone suppHed by the cumene oxidation process is made up from other sources. The largest use for acetone is in solvents although increasing amounts ate used to make bisphenol A [80-05-7] and methyl methacrylate [80-62-6]. a-Methylstyrene [98-83-9] is produced in controlled quantities from the cleavage of cumene hydroperoxide, or it can be made directly by the dehydrogenation of cumene. About 2% of the cumene produced in 1987 went to a-methylstyrene manufacture for use in poly (a-methylstyrene) and as an ingredient that imparts heat-resistant quaUties to polystyrene plastics. 

Other large-volume esters are vinyl acetate [108-05-4] (VAM, 1.15 x 10 t/yr), methyl methacrylate [80-62-6] (MMA, 0.54 x 10 t/yr), and dioctyl phthalate [117-81-7] (DOP, 0.14 x 10 t/yr). VAM (see Vinyl polymers) is produced for the most part by the vapor-phase oxidative acetoxylation of ethylene. MMA (see Methacrylic polymers) and DOP (see Phthalic acids) are produced by direct esterification techniques involving methacryHc acid and phthaHc anhydride, respectively. 

By copolymerising with a small amount of second monomer which acts as an obstruction to the unzipping reaction, in the event of this being allowed to start. On the industrial scale methyl methacrylate is sometimes copolymerised with a small amount of ethyl acrylate, and formaldehyde copolymerised with ethylene oxide or 1,3-dioxolane for this very reason. 

Polymers containing oxazoline groups are obtained either by grafting the 2-oxazoline onto a suitable existing polymer such as polyethylene or polyphenylene oxide or alternatively by copolymerising a monomer such as styrene or methyl methacrylate with a small quantity (<1%) of a 2-oxazoline. The grafting reaction may be carried out very rapidly (3-5 min) in an extruder at temperatures of about 200°C in the presence of a peroxide such as di-t-butyl peroxide Figure 7.13). 

Because the polymer degrades before melting, polyacrylonitrile is commonly formed into fibers via a wet spinning process. The precursor is actually a copolymer of acrylonitrile and other monomer(s) which are added to control the oxidation rate and lower the glass transition temperature of the material. Common copolymers include vinyl acetate, methyl acrylate, methyl methacrylate, acrylic acid, itaconic acid, and methacrylic acid [1,2]. 

Poly(ethylene terephtlhalate) Phenol-formaldehyde Polyimide Polyisobutylene Poly(methyl methacrylate), acrylic Poly-4-methylpentene-1 Polyoxymethylene polyformaldehyde, acetal Polypropylene Polyphenylene ether Polyphenylene oxide Poly(phenylene sulphide) Poly(phenylene sulphone) Polystyrene Polysulfone Polytetrafluoroethylene Polyurethane Poly(vinyl acetate) Poly(vinyl alcohol) Poly(vinyl butyral) Poly(vinyl chloride) Poly(vinylidene chloride) Poly(vinylidene fluoride) Poly(vinyl formal) Polyvinylcarbazole Styrene Acrylonitrile Styrene butadiene rubber Styrene-butadiene-styrene Urea-formaldehyde Unsaturated polyester... 

ACPA azobis(4-cyanopentanoic acid) AIBN azobis isobutyronitrile) BPO benzoyl peroxide DVB divinyl benzene, EGA 2-ethylcyano-acrylate HPC hydroxypropyl cellulose MMA methyl methacrylate PAAc polyacrylic acid PEI polyethyleneimine, PEO/PPO polyethylene oxide/polypyropylene oxide copolymer PVME polyvinylmethylether PVP polyvinylpyrrolidone K-30 DMSO dimethylsulfoxide PGA polyglutaraldehyde CMS chloromethylstyrene PMMA-g-OSA polymethylmethacrylate grafted oligostearic acid. 

Kondo maintained his interest in this area, and with his collaborators [62] he recently made detailed investigations on the polymerization and preparation of methyl-4-vinylphenyl-sulfonium bis-(methoxycarbonyl) meth-ylide (Scheme 27) as a new kind of stable vinyl monomer containing the sulfonium ylide structure. It was prepared by heating a solution of 4-methylthiostyrene, dimethyl-diazomalonate, and /-butyl catechol in chlorobenzene at 90°C for 10 h in the presence of anhydride cupric sulfate, and Scheme 27 was polymerized by using a, a -azobisi-sobutyronitrile (AIBN) as the initiator and dimethylsulf-oxide as the solvent at 60°C. The structure of the polymer was confirmed by IR and NMR spectra and elemental analysis. In addition, this monomeric ylide was copolymerized with vinyl monomers such as methyl methacrylate (MMA) and styrene. 

Trauzl Test. 21,.4% of TNT when pure (Ref 26) for mixts see below Uses. It does not gelatinize NC (Ref 15). It improves the octane rating of diesel fuels (Ref 26). It decreases the polymerization rate of methyl methacrylate (Ref 24), and styrene (Ref 23), but. does not inhibit the reaction. A review of its use as an oxidizer in rocket propints is given in Ref 33. TeNMe gives yellow to orange colors with olefins and aromatic compds. This is used as a diagnostic test for the presence of these groups in org analysis (Refs 6, 9, 16, 17 29)... 

In a similar manner polyisoprene-polyethylene oxide block copolymers can prepared301. It is surprising that the poly(methyl methacrylate) anion can be successfully used for the polymerization of ethylene oxide without chain transfer302. Graft copolymers are also prepared by successive addition of ethylene oxide to the poly-... 

II. B polyethylene glycol, ethylene oxide, polystyrene, diisocyanates (urethanes), polyvinylchloride, chloroprene, THF, diglycolide, dilac-tide, <5-valerolactone, substituted e-caprolactones, 4-vinyl anisole, styrene, methyl methacrylate, and vinyl acetate. In addition to these species, many copolymers have been prepared from oligomers of PCL. In particular, a variety of polyester-urethanes have been synthesized from hydroxy-terminated PCL, some of which have achieved commercial status (9). Graft copolymers with acrylic acid, acrylonitrile, and styrene have been prepared using PCL as the backbone polymer (60). 

The most important approach was to use poly(methyl methacrylate), PMMA, in formulations, either as a particulate filler or as a coating on zinc oxide particles (Jendresen Phillips, 1969 Jendresen et al., 1969 Civjan et al., 1972). It is claimed that such materials can be used for permanent as well as temporary cementation. 

Atactic poly(methyl methacrylate/methacrylic acid), the copolymer of methyl methacrylate (MMA) and methacrylic acid (MAA), was synthesized "directly" as a prepolymer to be esterified with bis(tri-n-butyltin) oxide (TBTO). Two formulations of poly (MMA/MAA) were synthesized, a 1 1 and a 2 1 MMA and MAA copolymer whose syntheses differ only in the proportion of monomer reacted. 

Local overheating and ignition occurred when solid benzoyl peroxide was put into a beaker which had been rinsed out with methyl methacrylate. Contact between the peroxide, a powerful oxidant and radical source, and oxidisable or polymerisable materials should only be under controlled conditions. 

Notes Cellulose (Whatman) PTMSP, poly(trimethyl silyl propine) PS, polystyrene PP, polypropylene PE, polyethylene PA 66, polyamide 66 PA 6, polyamide 6 PVP, poly(vinyl pyrrolidone) PPO, poly(2,6-dimetyl-l,4-phenylene oxide) PMMA, poly(methyl methacrylate) PETP, polyethylene terephthalate) Irganox 1010 is a Ciba anti-oxidant. 

---