Metallic content

The determination of the elemental composition of a petroleum cut is of prime importance because it provides a quick means of finding out the quality of a given cut or determining the efficiency of a refining process. In fact, the quality of a cut generally increases with the H/C ratio and in all cases, with a decrease in hetero-element (nitrogen, sulfur, and metals) content. 

Heavy residue conversion is linked to the demand for high quality diesel motor fuel (aromatics content 10%, cetane number 55) as well as to the demand for production of light fuel-oil having very low sulfur, nitrogen and metal contents. 

In the case of metal particles distributed on a support material (e.g. supported catalysts), XPS yields infomiation on the dispersion. A higher metal/support intensity ratio (at the same metal content) indicates a better dispersion [3]. 

Trace metal Trace metal contents Trace metals Tracer applications Tracer bullets Tracers... 

The first process utilizes a bed of nickel catalyst which has been regenerated with hydrogen to reduce the nickel content to metallic form. The finely divided metal then reacts with impurities and retains them in the bed, probably as nickel oxide in the case of oxygen or as physisorbed compounds for other impurities. Periodically, the bed is regenerated at elevated temperature using hydrogen to restore the metallic content. The nickel process can be used and regenerated indefinitely. 

Polyester composition can be determined by hydrolytic depolymerization followed by gas chromatography (28) to analyze for monomers, comonomers, oligomers, and other components including side-reaction products (ie, DEG, vinyl groups, aldehydes), plasticizers, and finishes. Mass spectroscopy and infrared spectroscopy can provide valuable composition information, including end group analysis (47,101,102). X-ray fluorescence is commonly used to determine metals content of polymers, from sources including catalysts, delusterants, or tracer materials added for fiber identification purposes (28,102,103). 

Coalition ofJSlortheast Governors. The CONEG model heavy-metal guideline is implemented through state regulations and limits total metal content of lead, chromium, mercury, and cadmium. The limitation of 100 parts per million total is aimed at protecting the environment from the disposal of post-consumer waste. 

The US. Pharmacopeia (USP XXII) or National Formula (NFXVII) (20) also provide a similar description however, the peroxide value is not defined (Table 9). These specifications are also given in the Handbook of Pharmaceutical Excipients (HPE), pubhshed jointiy by the American Pharmaceutical Association and The Pharmaceutical Society of Great Britain (21), which defines lecithins both from plants and eggs. The Merck Index (22) specifies a slightiy lower acid value. The Japanese Monograph (ISCI-II) (23) specifies a slightiy lower acetone-insoluble matter and a lower heavy-metal content. 

Table 7. Average Metal Content of Deep-Sea Nodules/ wt % Dry Basis ...

Table 1 gives the average metal content of the earth s cmst, ore deposits, and concentrates. With the exceptions of the recovery of magnesium from seawater and alkaU metals from brines, and the solution mining and dump or heap leaching of some copper, gold, and uranium (see Uranium and uranium compounds), most ores are processed through mills. Concentrates are the raw materials for the extraction of primary metals. 

Table 1. Metal Content of Igneous Rocks, Ore Deposits, and Concentrates, wt %...

The amount of collector used is necessarily very small because surface coverages of a monomolecular layer or less are required to impart sufficient hydrophobicity to the mineral. The usages typically range from 1—100 g of collector per ton of ore treated for sulfide flotation (typically 0.2—10% value metal content ia the ore) and 100—1000 g/1 for nonsulfide flotation (1—20% value mineral content) (10). 

Addition specifications for heavy metal content meets USP and ACS specifications. 

Transparent fused silica can be formed at a temperature of 1200°C and a pressure of 13.8 MPa (2000 psi) from silica powder consisting of 15 nm ultimate particles (92) or by electric arc fusion of pure silica sand having low iron and alkali metal contents. The cooled product is ground to the desired particle size. Fused sihca is primarily manufactured by C-E Minerals, Minco, and Precision Electro Minerals in the United States by Chuo Denko, Denki Kagaku Kogyo, NKK, Showa Denko, and Toshiba Ceramics in Japan. Based on 1988 data and projected growth, an estimated 135,000 metric tons of fused siUca were used in 1994 as a sacrificial component or investment casting in the manufacture of metals and as a component in refractory materials (62). 

Most talc sold to paper, ceramics, and other industrial customers is manufactured to specifications agreed to between the producer and consumer. In paper, properties such as color, abrasion, surface area, and tint ate most important, whereas in ceramics, oxide chemistry, fired color, pressing characteristics, and alkaH metal content ate mote important. There ate some military specifications for talc used in corrosive coatings (6) and for cosmetic talc products used for cleaning of personnel in chemical warfare zones (7). 

Biological sludges can be iacorporated iato the sod. An important consideration is the heavy metal content of the sludge, which will dictate the total number of years sludge can be appHed. The avadable nitrogen content of the sludge will determine the maximum yearly appHcation. 

ASTM recognizes two types of zinc dust in specification ASTM D 520-51 (reapproved 1976) (143), which includes permissible impurity concentrations. The metallic content of most commercial grades is 95—97%. The zinc oxide content is between 3 and 5% finer dusts contain higher concentrations because of high surface areas. Zinc dusts are manufactured in various size ranges, and a typical commercial dust has an average particle diameter between 4 and 8 p.m. Usually, dusts are screened to be essentially free of particles coarser than 75 p.m (200 mesh). 

Many investigators have also measured the trace metal content of asphalts (68). The catalytic behavior of vanadium has prompted studies of the relation between vanadium content and an asphalt s sensitivity to oxidation (viscosity ratio). The significance of metals in the behavior of asphalts is not yet well understood or defined. 

---