Maleic anhydride copolymers structures

The radical-catalyzed polymerization of furan and maleic anhydride has been reported to yield a 1 1 fiiran-maleic anhydride copolymer (89,91). The structure of the equimolar product, as shown by nmr analyses, is that of an unsaturated alternating copolymer (18) arising through homopolymerization of the intermediate excited donor—acceptor complex (91,92). 

Polysulfobetaines derived from alternating styrene-maleic anhydride copolymers 32 are easily prepared by ring opening of the anhydride moiety with 3-dimethylaminopropylamine, imidizing the resulting poly(amic acid) by heating, and alkylation with propane sultone [70-72]. For investigations of structure-property relationships additionally to 32b, the polymers 33 and 34 were synthesized [71]. The ionene-like polymer 33 was prepared... 

In addition polymers, by contrast, the recurring units have the same structures as the monomer(s) from which the polymer was formed. Examples are polystyrene (1-1), polyethylene (1-3), styrene-maleic anhydride copolymers (1-26), and so on. 

Finally, our studies show all divinyl ether-maleic anhydride copolymers examined to date to be a mixture of the 5-membered and 6-membered bicyclic structures. The primary evidence for this, of course, is the presence of peak B at ca. 35 ppm which is assigned to the methylene carbon on a tetrahydropyran ring. Major features of the spectrum can be readily explained based on the available data present by both us and Professor Kunitake. However, still in question is the meaning of the fine structure contained particularly in peaks D, E, and F with respect to the relative stereochemistry of the copolymer as produced. 

The use of polymeric ammonium salts and a sulfonic acid salt of sodium is an easy and efficient way of coating fabrics furthermore, employing the layer-by-layer (LbL) deposition technique can broaden the application of N-halamine biocides in other polar substances for use as antimicrobial coatings. Branched PEI, polypropylene (PP) and styrene maleic anhydride copolymers are a very good coating for food packaging materials, possibly due to the presence of both cationic- and N-halamine-forming structures. N-halamine cationic antimicrobial polymers based on (acrylamidopropyl)trimethylammonium chloride, PDDA chloride and poly(2-acrylamido-2-methylpropane sulfonic acid sodium salt) have been synthesised and coated onto cotton fabrics via an LbL deposition technique. 

Using micro-Raman imaging three blends consisting of polypropene/polyethene/ethene-propene copolymer, PBTP/polycarbonate/LDPE, and styrene-acrylonitrile copolymer/styrene-maleic anhydride copolymer/ polydimethylphenylene oxide were studied with regard to compositional and morphological heterogeneities. The general structure of PE fibres in an epoxy resin matrix was also studied. 59 refs. 

The interaction of polymer-solvent affects rheological properties. Studies on a divinyl ether-maleic anhydride copolymer show that molecular structure of die copolymer can be altered by the solvent selected for synfliesis." Studies have shown that the thermal and UV stability of PVC is affected by the presence of solvents. ... 

Ranganathan, S., Baker, W. R, Russel, K. E., and Whitney, B. A. 1999. Peroxide initiated maleic anhydride grafting Structural studies on an ester-containing copolymer and related substrates. loumal of Polymer Science. Part A Polymer Chemistry 37 1609-1618. 

Polyrn rS. Polymeric monolayers are formed either by spreading preformed polymers or by polymerizing reactive monomers on the water surface. A large variety of preformed polymers has been studied, including polyacrylates and polymethacrylates, poly(vinyl butyral), poly(vinyl methyl ether), poly(vinyl acetate), poly(vinyl fiuoride), poly(vinylidene fluoride), (12), silicone copolymers, maleic anhydride copolymers, and polypeptides (1). Monomers that have been successfully polymerized at the air-water interface include derivatives of aniline (13), vinyl alcohol (14), and styrene (15). In addition to the interesting chemistry and the two-dimensional structural control, polymer LB Aims are much more robust than films formed from straight-chain amphiphiles. 

The copolymers obtained by radical copolymerization of maleic anhydride (MA) with acrylic or vinyl comonomers, and the maleic add copolymers, generally obtained by the hydrolysis of the maleic anhydride copolymers (Figure 10.1), can be called maleic copolymers. They were intensively studied from a theoretical perspective, but also for their applications [1-3]. Copolymers ofMA with electron-donating comonomers, such as styrene, vinyl acetate, N-vinyl pyrrolidone, and methyl vinyl ether, have an alternant structure [ 1 ], but when MA is copolymerized with electron-acceptor comonomers like methyl methacrylate, acrylonitrile, statistic copolymers are obtained [1,2]. MA units from the copolymers are very reactive active agents with amine or hydroxyl groups... 

Y. Rong, H.-Z Chen., D.-C. Wei, J.-Z. Sun, and M. Wang, Microcapsules with compact membrane structure from gelatin and styrene-maleic anhydride copolymer by complex coacervation. Colloid. Surface A, 242,17-20,2004. 

Write structural formulas for maleic anhydride (M ) and stilbene (M2). Neither of these monomers homopolymerize to any significant extent, presumably owing to steric effects. These monomers form a copolymer,... 

Polymers having ionisable groups along the chain are known as polyelectrolytes. They generally exhibit properties in solution which are quite different from those with non-ionisable structures. Examples of polyelectrolytes include polyacids like poly (acrylic acid) and hydrolysed copolymers of maleic anhydride, polybases like poly (vinyl amine) and poly (4-vinyl pyridine), polyphosphates, nucleic acids, and proteins. 

The products of polyethylene modification are mixed Mock and graft copolymers of three dimensional structures (with acrylic acid, methacrylamide and acrylonitrile) or linear structures (acenaphthylene and maleic anhydride). This is again consistent with the nature of the monomers and the activity of their radicals. 

Preparation of addition polymers having the oxolene (dihydrofuran) functionality can be envisioned to occur in two possible ways (Scheme 13). Both, in fact, have been observed (77MI11102). Whereas furan (53) or its derivatives do not homopolymerize under free radical conditions, 1 1 alternating copolymers possessing the 1,4-structure are produced with maleic anhydride (50). Intermediate formation of a CT complex between monomers (50) and (53) is believed to be necessary before polymerization can occur. On the other hand, cationic polymerization is quite facile. The outcome is straightforward with benzo[f>]furan derivatives, producing 1,2-polymers. Optically active poly(benzofurans) are formed when the cationic polymerizations are conducted in the presence of a chiral anion. 

Instead of monomers, polymers in solution can be grafted on Nylon structures. Aqueous solution of poly(acrylic add) is used for impregnation of polyamide fabrics which is subsequently dried during 1 to 5hrs at 80-150° C after which cure is carried out for 15 to 60 min at 150-218° C (99). A copolymer of styrene-maleic anhydride is said to be grafted on polycaprolactam by heating at 230° C at a pressure of 25 kg/cm2 (100). 

---