Lead compounds Physical properties

Solid-state characterization is one of the most important functions of the preformulation group, which is assigned the responsibility of making recommendations for further formulation work on a lead compound. Physical properties have a direct bearing on both physical and chemical stabilities of the lead compound. Much of the later work on formulation will depend on how well the solid state is characterized from the decisions to compress the drug into tablets to the selection of appropriate salt forms. The studies reported in this section, of course, apply to those drugs that are available in solid form, crystalline or amorphous, pure or amalgamated. 

A fully optimized formulation provides high outputs, low scrap rates, high-quality finished products and the required compound physical properties. Deficient or excessive amounts of lubricant lead to reduced processing efficiencies or can even shutdown the operation. A balanced lubricant system (right amounts of both internal and external lubrication) provides control over the compound fusion and thermal stability times, output rate, blooming, compound clarity and physical properties. 

Reversion of sulphur-based crosslinks continues to a problem for NR compounders. Reversion is the thermal degradation of polysulphidic crosslinks leading to a reduction of crosslink density and an introduction of main chain modifications. In practice, reversion leads to a decline in compound physical properties. Reversion occurs when compounds are overcured or when vulcanisates are exposed to anaerobic ageing. Ideally, a... 

Lead, like tin, forms only one hydride, plumbane. This hydride is very unstable, dissociating into lead and hydrogen with great rapidity. It has not been possible to analyse it rigorously or determine any of its physical properties, but it is probably PbH4. Although this hydride is unstable, some of its derivatives are stable thus, for example, tetraethyllead, Pb(C2Hj)4, is one of the most stable compounds with lead in a formal oxidation state of + 4. It is used as an antiknock in petrol. 

The production of both an alcohol and the sodium salt of an acid might easily be confused with the hydrolysis products of an ester (in the above instance benzyl benzoate). Such an error would soon be discovered (e.g., by reference to the b.p. and other physical properties), but it would lead to an unnecessary expenditure of time and energy. The above example, however, emphasises the importance of conducting the class reactions of neutral oxygen-containing compounds in the proper order, viz., (1) aldehydes and ketones, (2) esters and anhydrides, (3) alcohols, and (4) ethers. 

One of the most significant sources of change in isotope ratios is caused by the small mass differences between isotopes and their effects on the physical properties of elements and compounds. For example, ordinary water (mostly Ej O) has a lower density, lower boiling point, and higher vapor pressure than does heavy water (mostly H2 0). Other major changes can occur through exchange processes. Such physical and kinetic differences lead to natural local fractionation of isotopes. Artificial fractionation (enrichment or depletion) of uranium isotopes is the basis for construction of atomic bombs, nuclear power reactors, and depleted uranium weapons. 

Lead Iodide. Lead diiodide, Pbl2, forms a powder of yellow hexagonal crystals some physical properties are given in Table 1. Lead diiodide is soluble in alkaUes and potassium iodide, and insoluble in alcohol. It is made by treating a water-soluble lead compound with hydroiodic acid or a soluble metal iodide. It is readily purified by recrystaUization in water. 

Vulcanization was first reported in 1839 with the discovery that heating natural mbber with sulfur and basic lead carbonate produced an improvement in physical properties (2). In 1906, aniline was the first organic compound found to have the abiUty to accelerate the reaction of sulfur with natural mbber (3). Various derivatives of aniline were soon developed which were less toxic and possessed increased acceleration activity. 

An extensive pesticide properties database was compiled, which includes six physical properties, ie, solubiUty, half-life, soil sorption, vapor pressure, acid pR and base pR for about 240 compounds (4). Because not all of the properties have been measured for all pesticides, some values had to be estimated. By early 1995, the Agricultural Research Service (ARS) had developed a computerized pesticide property database containing 17 physical properties for 330 pesticide compounds. The primary user of these data has been the USDA s Natural Resources Conservation Service (formerly the Soil Conservation Service) for leaching models to advise farmers on any combination of soil and pesticide properties that could potentially lead to substantial groundwater contamination. 

The physical properties of the expanded radialenes were greatly enhanced upon donor functionalization, leading to the stable derivatives 76-78 with fully planar conjugated rr-chromophores [110]. These compounds exhibit large third-order nonlinear optical coefficients, can be reversibly reduced or oxidized, and... 

When the mesogenic compounds are chiral (or when chiral molecules are added as dopants) chiral mesophases can be produced, characterized by helical ordering of the constituent molecules in the mesophase. The chiral nematic phase is also called cholesteric, taken from its first observation in a cholesteryl derivative more than one century ago. These chiral structures have reduced symmetry, which can lead to a variety of interesting physical properties such as thermocromism, ferroelectricity, and so on. 

A lead is variously defined in the pharmaceutical industry as a compound derived from a hit with some degree of in vitro optimization (potency in primary assay, activity in functional and/or cellular assay), optimization of physical properties (solubility, permeability), and optimization of in vitro ADME properties (microsomal stability, CYP inhibition). Moreover, a lead must have established SAR/SPR around these parameters such that continued optimization appears possible. A lead may also have preliminary PK and in vivo animal model data. However, it is the task of the lead optimization chemist to improve PK and in vivo activity to the levels needed for identification of a clinical candidate. 

In addition to the in vitro assays described above, physical properties should be calculated for all new compounds designed for synthesis. It is necessary to keep in mind the target values for leads, such as MW < 450, clogP < 4.0, and PSA < 80. It has been demonstrated that properties such as MW and clogP increase during optimization [26], so that a lead needs to have lower values for these properties than a drug candidate. Additional factors that make up the rule-of-five [27] as well as the number of rotatable bonds as described by Veber [28] can also be tracked. While... 

In all these situations the Hill coefficient provides a warning sign to the medicinal chemist that the physical properties of the compound may render it intractable for further consideration. In short, whenever the Hill coefficient is significantly different from unity, the experimental data and the quality of the lead compound must be scrutinized much more carefully. 

The physical properties of lead and several of its compounds are listed in Table 3-2. Lead readily tarnishes in the atmosphere but is one of the most stable fabricated metals because of its corrosive resistance to air, water, and soil (Howe 1981). A waste that contains lead or lead compounds may (or may not) be characterized a hazardous waste following testing by the Toxicity Characteristic Leaching Procedure (TCLP) as prescribed by the Resource Conservation and Recovery Act (RCRA) regulations. 

---