Knowledge, definition

Fig. 7.8. From process and business data to knowledge definition...

It is important to realise that knowledge of depositional processes and features in a given reservoir will be vital for the correct siting of the optimum number of appraisal and development wells, the sizing of facilities and the definition of a reservoir management policy. 

Cell Structure. A complete knowledge of the cell stmcture of a cellular polymer requires a definition of its cell sizes, cell shapes, and location of each cell in the foam. 

Derived plant and animal products make better use or upgrade the nutritional quaHty of already existing materials or products. Synthetic and manufactured products arose from knowledge of the functional properties of food ingredients and of human and animal nutrition that involved more precise definition of nutrient requirements for growth, reproduction, lactation, and body maintenance in both humans and domestic Hvestock. Pood products have been developed to meet human needs under abnormal environments, eg, military rations for arctic, tropical, or desert environments, and special products for astronauts ia space flights. 

These are the definitions of the two characteristic dissociation constants normally expressed in terms of p K. When three dissociating groups are present in a molecule there are three piC values, ie, pfC, P 3- knowledge of these piC values is important in the separation or isolation of each amino acid by ion-exchange chromatography. 

Process Systems. Because of the large number of variables required to characterize the state, a process is often conceptually broken down into a number of subsystems which may or may not be based on the physical boundaries of equipment. Generally, the definition of a system requires both definition of the system s boundaries, ie, what is part of the system and what is part of the system s surroundings and knowledge of the interactions between the system and its environment, including other systems and subsystems. The system s state is governed by a set of appHcable laws supplemented by empirical relationships. These laws and relationships characterize how the system s state is affected by external and internal conditions. Because conditions vary with time, the control of a process system involves the consideration of the system s transient behavior. 

Definition / An expert system is a computer program that manipulates large amounts of symboHc knowledge using quaUtative techniques, to solve problems that can otherwise be solved only by expert human problem solvers. Expert systems capture the human problem solver s expertise in the form of domain-specific knowledge and domain-independent problem-solving strategies. 

Definition 2 Knowledge-based systems are computer programs that encode symboHc knowledge about domains and tasks, and solve problems by manipulating this knowledge using quaHtative techniques. 

Definition 2 is phrased in terms of knowledge-based systems rather than expert systems. No reference is made to expert human problem solvers. Definition 2 captures the sense that the representation and manipulation of knowledge is the source of such a system s power, whether or not that knowledge is dkecdy eHcited from a human expert. 

High-Pressure Compressors There is a definite trend in the chemical industry toward the use of high-pressure compressors with discharge pressures of from 34.5 to 172 MPa (5000 to 25,000 IbFin ) and wim capacities from 8.5 X 10 to 42.5 X 10 mVh (5000 to 25,000 ftVmin). These require special design, and a complete knowledge of the characteristics of the gas is necessary. In most cases, these types of applications use the barrel-type centrifugal compressor. 

When a flocculated feed is added to a filter tank, there is a definite time lag before this material reaches the surface of the filter medium. Since this lag time is not known at the time of testing, a lag time of 8 to 10 minutes should be allowed before starting the first leaf test on a flocculated shiny. Two, or perhaps three, tests can be run before the elapsed time exceeds the probable retention time in the full-scale filter tank. With knowledge of the elapsed time after flocculation and data relating to the rate of degradation, the rates obtained on the leaf test runs can be adjusted to some constant lag time consistent with the anticipated full-sc e design. 

Assistance in problem definition and in developing a test program should be sought from persons experienced in the field. If your organization has a consultant in separations of this land, by all means m e use of the expertise available. If not, it may be wise to employ an outside consultant, whose special knowledge and guidance can save time, money, and headaches. It is important to do this early after the separation equipment has been installed, there is httle a consultant can do to remedy the sometimes disastrous effects of a poor selection. Often it is best to work with established equipment manufacturers throughout the selection process, unless the problem is unusually sensitive or confidential. Their experience with problems similar to yours may be most helpful and avoid many false starts. 

Among other things, one prerequisite necessaiy to calculate the pressure relief openings needed on the apparatus is knowledge about the explosion threat definition and venting system hardware definition. Tne various influences are summarized in Table 26-22. 

The present author was worried about the lack of knowledge concerning the quality of the kinetic models used in the industry. A model is by definition a small, scaled-down imitation of the real thing. (Men should remember tliis when their mothers-in-law call them model husbands.) In the industry all we require from a kinetic model is that it describe the chemical rate adequately by using traditional mathematical forms (Airhenius law, power law expressions and combinations of these) within the limits of its applications. Neither should it rudely violate the known laws of science. 

Eirst of all, what is meant by a solid surface Ideally the surface should be defined as the plane at which the solid terminates, that is, the last atom layer before the adjacent phase (vacuum, vapor, liquid, or another solid) begins. Unfortunately such a definition is impractical because the effect of termination extends into the solid beyond the outermost atom layer. Indeed, the current definition is based on that knowledge, and the surface is thus regarded as consisting of that number of atom layers over which the effect of termination of the solid decays until bulk properties are reached. In practice, this decay distance is of the order of 5-20 nm. 

Detailed knowledge about the code and the underlying physical phenomena is necessary for the definition of an appropriate building modelization and for the input definition. 

Knowledge of the variation of stress and strain through the laminate thickness is essential to the definition of the extensional and bending stiffnesses of a laminate. The laminate is presumed to consist of per-... 

Attempts have been made to deduce the structure of the predominant form of a potentially tautomeric compound from the shifts which occur in the ultraviolet spectrum of the compound in question on passing from neutral to basic or acidic solutions. The fact that no bathochromic shifts were observed for 2- and 4-hydroxy quinoline and 1-hydroxyisoquinoline under these conditions was taken as evidence that they existed in the oxo form [similar work on substituted quinol-4-ones led to no definite conclusions ]. A knowledge of the dissociation constants is essential to studies of this type, and the conclusions can, in any case, be only very tentative. A further dif-... 

The plant engineer by definition must be a generalist who has a basic knowledge of all aspects of business. Because of these expansive skill requirements, the plant engineer must have the training, experience and expertise necessary to fulfill this critical role in the organization. In part, a plant engineer is responsible for ... 

A procedure is given to take account of tall buildings near to the stack or if the building to which the stack is attached is less than 2.5 U. The Memorandum suggests that 5 U should be used as a radius around the chimney as the definition of near , but in practice, interpretation and local knowledge may expand this circle. 

---