Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Kinetics synthesis

Schroen CGPH, Nierstrasz VA, Moody HM et aL (2001a) ModeUing of the enzymatic kinetic synthesis of cephalexin-rnlluence of substrate concentration and temperature. Biotechnol Bioeng 73 171-178... [Pg.290]

Kinetics, synthesis, and characterization form the three subdisciplines of catalysis. Physical techniques offer means to relate catalyst performance with structure and composition. Theory and experiment provides an in-depth understanding of catalysis on a molecular level. [Pg.15]

As on previous occasions, the reader is reminded that no very extensive coverage of the literature is possible in a textbook such as this one and that the emphasis is primarily on principles and their illustration. Several monographs are available for more detailed information (see General References). Useful reviews are on future directions and anunonia synthesis [2], surface analysis [3], surface mechanisms [4], dynamics of surface reactions [5], single-crystal versus actual catalysts [6], oscillatory kinetics [7], fractals [8], surface electrochemistry [9], particle size effects [10], and supported metals [11, 12]. [Pg.686]

The applications of this simple measure of surface adsorbate coverage have been quite widespread and diverse. It has been possible, for example, to measure adsorption isothemis in many systems. From these measurements, one may obtain important infomiation such as the adsorption free energy, A G° = -RTln(K ) [21]. One can also monitor tire kinetics of adsorption and desorption to obtain rates. In conjunction with temperature-dependent data, one may frirther infer activation energies and pre-exponential factors [73, 74]. Knowledge of such kinetic parameters is useful for teclmological applications, such as semiconductor growth and synthesis of chemical compounds [75]. Second-order nonlinear optics may also play a role in the investigation of physical kinetics, such as the rates and mechanisms of transport processes across interfaces [76]. [Pg.1289]

Scheme 2.5. Synthesis of the ionic dienophiles 2.4f and 2.4g. features of the nncatalysed reaction will be discussed The kinetics of the Diels-Alder reaction of 2,4... Scheme 2.5. Synthesis of the ionic dienophiles 2.4f and 2.4g. features of the nncatalysed reaction will be discussed The kinetics of the Diels-Alder reaction of 2,4...
Clearly, there is a need for techniques which provide access to enantiomerically pure compounds. There are a number of methods by which this goal can be achieved . One can start from naturally occurring enantiomerically pure compounds (the chiral pool). Alternatively, racemic mixtures can be separated via kinetic resolutions or via conversion into diastereomers which can be separated by crystallisation. Finally, enantiomerically pure compounds can be obtained through asymmetric synthesis. One possibility is the use of chiral auxiliaries derived from the chiral pool. The most elegant metliod, however, is enantioselective catalysis. In this method only a catalytic quantity of enantiomerically pure material suffices to convert achiral starting materials into, ideally, enantiomerically pure products. This approach has found application in a large number of organic... [Pg.77]

The preceding discussions of the kinetics and molecular weight distributions in the step-growth polymerization of AB monomers are clearly exemplified by the esterification reactions of such monomers as glycolic acid or co-hydroxydecanoic acid. Therefore one method for polyester synthesis is the following ... [Pg.299]

The examples given above represent only a few of the many demonstrated photochemical appHcations of lasers. To summarize the situation regarding laser photochemistry as of the early 1990s, it is an extremely versatile tool for research and diagnosis, providing information about reaction kinetics and the dynamics of chemical reactions. It remains difficult, however, to identify specific processes of practical economic importance in which lasers have been appHed in chemical processing. The widespread use of laser technology for chemical synthesis and the selective control of chemical reactions remains to be realized in the future. [Pg.19]

Enzymatic hydrolysis of A/-acylamino acids by amino acylase and amino acid esters by Hpase or carboxy esterase (70) is one kind of kinetic resolution. Kinetic resolution is found in chemical synthesis such as by epoxidation of racemic allyl alcohol and asymmetric hydrogenation (71). New routes for amino acid manufacturing are anticipated. [Pg.279]

HTS catalyst consists mainly of magnetite crystals stabilized using chromium oxide. Phosphoms, arsenic, and sulfur are poisons to the catalyst. Low reformer steam to carbon ratios give rise to conditions favoring the formation of iron carbides which catalyze the synthesis of hydrocarbons by the Fisher-Tropsch reaction. Modified iron and iron-free HTS catalysts have been developed to avoid these problems (49,50) and allow operation at steam to carbon ratios as low as 2.7. Kinetic and equiUbrium data for the water gas shift reaction are available in reference 51. [Pg.348]

Conra.d-Limpa.ch-KnorrSynthesis. When a P-keto ester is the carbonyl component of these pathways, two products are possible, and the regiochemistry can be optimized. Aniline reacts with ethyl acetoacetate below 100°C to form 3-anilinocrotonate (14), which is converted to 4-hydroxy-2-methylquinoline [607-67-0] by placing it in a preheated environment at 250°C. If the initial reaction takes place at 160°C, acetoacetanilide (15) forms and can be cyclized with concentrated sulfuric acid to 2-hydroxy-4-methylquinoline [607-66-9] (49). This example of kinetic vs thermodynamic control has been employed in the synthesis of many quinoline derivatives. They are useful as intermediates for the synthesis of chemotherapeutic agents (see Chemotherapeuticsanticancer). [Pg.391]

An especially interesting case of oxygen addition to quinonoid systems involves acidic treatment with acetic anhydride, which produces both addition and esterification (eq. 3). This Thiele-Winter acetoxylation has been used extensively for synthesis, stmcture proof, isolation, and purification (54). The kinetics and mechanism of acetoxylation have been described (55). Although the acetyhum ion is an electrophile, extensive studies of electronic effects show a definite relationship to nucleophilic addition chemistry (56). [Pg.411]

The search for new, high performance materials requites the synthesis of weU-defined, narrow molecular weight distribution, cycHc-free, homo- and copolymers. Synthesis of these polymers can be accompHshed by the kinetically controUed polymerization of the strained monomer. [Pg.46]

Divinylbenzene copolymers with styrene are produced extensively as supports for the active sites of ion-exchange resins and in biochemical synthesis. About 1—10 wt % divinylbenzene is used, depending on the required rigidity of the cross-linked gel, and the polymerization is carried out as a suspension of the monomer-phase droplets in water, usually as a batch process. Several studies have been reported on the reaction kinetics (200,201). [Pg.520]

The poly(vinyl alcohol) made for commercial acetalization processes is atactic and a mixture of cis- and /n j -l,3-dioxane stereoisomers is formed during acetalization. The precise cis/trans ratio depends strongly on process kinetics (16,17) and small quantities of other system components (23). During formylation of poly(vinyl alcohol), for example, i j -acetalization is more rapid than /ra/ j -acetalization (24). In addition, the rate of hydrolysis of the trans-2iQ. -A is faster than for the <7 -acetal (25). Because hydrolysis competes with acetalization during acetal synthesis, a high cis/trans ratio is favored. The stereochemistry of PVF and PVB resins has been studied by proton and carbon nmr spectroscopy (26—29). [Pg.450]

These pioneers understood the interplay between chemical equiUbrium and reaction kinetics indeed, Haber s research, motivated by the development of a commercial process, helped to spur the development of the principles of physical chemistry that account for the effects of temperature and pressure on chemical equiUbrium and kinetics. The ammonia synthesis reaction is strongly equiUbrium limited. The equiUbrium conversion to ammonia is favored by high pressure and low temperature. Haber therefore recognized that the key to a successful process for making ammonia from hydrogen and nitrogen was a catalyst with a high activity to allow operation at low temperatures where the equiUbrium is relatively favorable. [Pg.161]

Acid—Base Catalysis. Inexpensive mineral acids, eg, H2SO4, and bases, eg, KOH, in aqueous solution are widely appHed as catalysts in industrial organic synthesis. Catalytic reactions include esterifications, hydrations, dehydrations, and condensations. Much of the technology is old and well estabhshed, and the chemistry is well understood. Reactions that are cataly2ed by acids are also typically cataly2ed by bases. In some instances, the kinetics of the reaction has a form such as the following (9) ... [Pg.162]

The kinetics of the bisphenol A synthesis has been reported to be of the following form (11)... [Pg.163]

Product formation kinetics in mammalian cells has been studied extensively for hybridomas. Most monoclonal antibodies are produced at an enhanced rate during the Gq phase of the cell cycle (8—10). A model for antibody production based on this cell cycle dependence and traditional Monod kinetics for cell growth has been proposed (11). However, it is not clear if this cell cycle dependence carries over to recombinant CHO cells. In fact it has been reported that dihydrofolate reductase, the gene for which is co-amplified with the gene for the recombinant protein in CHO cells, synthesis is associated with the S phase of the cell cycle (12). Hence it is possible that the product formation kinetics in recombinant CHO cells is different from that of hybridomas. [Pg.230]

R. MUkovich, in J. E. McGrath, A., Anionic Polymerisation Kinetics, Mechanisms, and Synthesis, ACS Symposium Series, No. 166, American Chemical Society, Washington, D.C., 1981, p. 41. [Pg.190]

Enzyme-Catalyzed Asymmetric Synthesis. The extent of kinetic resolution of racemates is determined by differences in the reaction rates for the two enantiomers. At the end of the reaction the faster reacting enantiomer is transformed, leaving the slower reacting enantiomer unchanged. It is apparent that the maximum product yield of any kinetic resolution caimot exceed 50%. [Pg.332]


See other pages where Kinetics synthesis is mentioned: [Pg.73]    [Pg.121]    [Pg.290]    [Pg.81]    [Pg.439]    [Pg.73]    [Pg.121]    [Pg.290]    [Pg.81]    [Pg.439]    [Pg.945]    [Pg.126]    [Pg.320]    [Pg.121]    [Pg.254]    [Pg.254]    [Pg.264]    [Pg.275]    [Pg.297]    [Pg.242]    [Pg.411]    [Pg.350]    [Pg.508]    [Pg.525]    [Pg.368]    [Pg.446]    [Pg.161]    [Pg.277]   
See also in sourсe #XX -- [ Pg.204 ]




SEARCH



Ammonia Synthesis—Complicated Kinetics

Ammonia Synthesis—Simple Kinetics

Ammonia synthesis kinetic model

Ceramic powder synthesis kinetics

Dynamic kinetic asymmetric synthesis

Dynamic kinetic resolution enzymatic stereoselective synthesis

Elastomer synthesis kinetics

Elastomer synthesis mechanism and kinetics

Enzymatic synthesis chiral alcohols, kinetic resolution

Enzymatic synthesis kinetic parameters

Fischer-Tropsch synthesis kinetics

Fischer-Tropsch synthesis transient kinetics

Fischer—Tropsch synthesis kinetic model

Hydrolytic kinetic resolution, epoxides synthesis

Kinetic aspects of ammonia synthesis

Kinetic aspects of methanol synthesis

Kinetic models of polyurethane synthesis

Kinetic models polymer synthesis

Kinetic of synthesis

Kinetic stability synthesis

Kinetic study, modeling, Fischer-Tropsch synthesis

Kinetic template synthesis approach

Kinetically controlled synthesis

Kinetics ammonia synthesis

Kinetics ammonia synthesis model

Kinetics and Mechanism of Ammonia Synthesis

Kinetics fatty-ester synthesis

Kinetics of NH3 Synthesis

Kinetics of Overall Reactions for Ammonia Synthesis

Kinetics of ammonia synthesis

Kinetics of polymer synthesis (general)

Kinetics synthesis over ruthenium

Laser synthesis kinetics

Natural product synthesis racemic alcohols, kinetic resolution

Oligosaccharide synthesis kinetics

Peptidases kinetically controlled synthesis

Plasma synthesis kinetics

Polyelectrolyte synthesis, kinetics

Polymerization kinetics synthesis

Polymers, kinetic modeling synthesis

Protein synthesis kinetic proofreading

Reaction kinetics Ammonia synthesis

Solid synthesis kinetic control

Solid-phase synthesis kinetics

Solid-phase synthesis reaction kinetics

Synthesis An Interplay Between Thermodynamics and Kinetics

Synthesis kinetic

Synthesis of the Overall Kinetics

Thermodynamics and Kinetics of Methanol Synthesis

© 2024 chempedia.info