Enzyme isolated

The isolation of enzymes in a pure state is frequently a matter of great difficulty owing to their instability, their low concentrations in plant and animal tissues, and also to their colloidal nature. The methods employed depend upon the physical and chemical nature of the enzyme in question. In the following experiments, no attempt has been made to isolate enzymes in a high slate of purity. 

Other immobilization methods are based on chemical and physical binding to soHd supports, eg, polysaccharides, polymers, glass, and other chemically and physically stable materials, which are usually modified with functional groups such as amine, carboxy, epoxy, phenyl, or alkane to enable covalent coupling to amino acid side chains on the enzyme surface. These supports may be macroporous, with pore diameters in the range 30—300 nm, to facihtate accommodation of enzyme within a support particle. Ionic and nonionic adsorption to macroporous supports is a gentle, simple, and often efficient method. Use of powdered enzyme, or enzyme precipitated on inert supports, may be adequate for use in nonaqueous media. Entrapment in polysaccharide/polymer gels is used for both cells and isolated enzymes. 

Biotransformations are carried out by either whole cells (microbial, plant, or animal) or by isolated enzymes. Both methods have advantages and disadvantages. In general, multistep transformations, such as hydroxylations of steroids, or the synthesis of amino acids, riboflavin, vitamins, and alkaloids that require the presence of several enzymes and cofactors are carried out by whole cells. Simple one- or two-step transformations, on the other hand, are usually carried out by isolated enzymes. Compared to fermentations, enzymatic reactions have a number of advantages including simple instmmentation reduced side reactions, easy control, and product isolation. 

Moreover, fermentation of various a-substituted cycloalkanone enol esters results in optically active six-, eight-, ten-, and twelve-membered ring ketones with 70—96% ee (84). Isolated enzymes catalyze similar transformations, bacillus coagulans and Candida glindracea]i 2Lse OF (Meito Sangyo) hydrolyze a number of cycHc and acycHc enol esters, giving ketones in 40—80% yield and 14—85% ee (85,86). 

The hydrolysis of nitriles can be carried out with either isolated enzymes or immobilized cells. Eor example, resting cells of P. chlororaphis can accumulate up to 400 g/L of acrylamide in 8 h, provided acrylonitrile is added gradually to avoid nitrile hydratase inhibition (116). The degree of acrylonitrile conversion to acrylamide is 99% without any formation of acryUc acid. Because of its high efficiency the process has been commercialized and currentiy is used by Nitto Chemical Industry Co. on a multithousand ton scale. 

Cells and isolated enzymes are often susceptible to poisoning at low levels of chemical contamination. It is, therefore, necessary to carry out expensive purification of substrates (feedstocks) and water used in bioprocesses. 

Here we will focus on the biochemical aspects. The techniques of isolating enzymes, the process of enzyme immobilisation and the behaviour of immobilised enzyme reactors are discussed in detail in the BIOTOL text Technological Applications of Biocatalysts", so will not deal with these aspects in detail here. In outline, however, once the desired enzyme is isolated, it is attached to a carrier material. In order to ascertain sufficient accessibility of the enzyme, a bifunctional spacer molecule is attached to the carrier ... 

Tissue and Bacteria Electrodes The limited stability of isolated enzymes, and the fact that some enzymes are expensive or even unavailable in the pure state, has prompted the use of cellular materials (plant tissues, bacterial cells, etc.) as a source for enzymatic activity (35). For example, banana tissue (which is rich with polyphenol oxidase) can be incorporated by mixing within the carbon paste... 

In recent years ionic liquids have also been employed as media for reactions catalyzed both by isolated enzymes and by whole cells, and excellent reviews on this topic are already available [47]. Biocatalysis has been mainly conducted in those room-temperature ionic liquids that are composed of a 1,3-dialkylimidazolium or N-alkylpyridinium cation and a noncoordinating anion [47aj. 

Racemic hydantoins result from the reaction of carbonyl compounds with potassium cyanide and ammonium carbonate or the reaction of the corresponding cyanohydrins with ammonium carbonate (Bucherer-Bergs reaction). Hydantoins racemize readily under basic conditions or in the presence of hydantoin racemase, thus allowing DKR (Figure 6.43). Hydantoinases (EC 3.5.2.2), either isolated enzymes or whole microorganisms, catalyze the hydrolysis of five-substituted... 

An isolated enzyme is also used for the reduction in SCCO2 [20cj. H LADH was used for reduction of butyraldehyde as shovm in Figure 8.27. In this case, addition of... 

Figure 8.27 Reduction of aldehyde in SCCO2 by an isolated enzyme, horse liver alcohol dehydrogenase (HLADH) [20c] (a) Reaction scheme (b) fluorinated coenzyme soluble in CO2 and (c) effect of coenzyme on the reaction.

Table 9.1 Representative isolated enzymes for the oxidation of alcohols.

Such isolated enzyme approaches for deracemization have a clear disadvantage in that they require two operational manipulations with an intermediate recovery step. A one-pot strategy is offered by employing whole-cell biotransformations with strains containing set(s) of complementary dehydrogenases operating in both biooxidative and bioreductive modes. Trace amounts of the intermediate ketone species can be isolated in several cases. In order to lead to an efficient deracemization... 

Cyclic dithioketals and acetals represent another important class of sulfur containing chiral auxiliaries, which are available in chiral form by biooxidation. Biotransformations were performed on a preparative scale using whole-cells (wild type and recombinant) and isolated enzyme. Again, enantiocomplementary oxidation of unsubstituted dithianes (linear and cyclic, R = H) was observed when using and CPMOcomo (Scheme 9.28) [211,212]. Oxygenation of functionalized substrates (R = substituted alkyl) with gave preferably trans... 

The rate is independent of the substrate concentration and first order with respect to enzyme concentration. In this case reaction (3), in which the complex decomposes to form the product, is the slowest step and is therefore rate limiting. Although this discussion has assumed that we have only an isolated enzyme reacting with a substrate, the same principles are applied to the more complex case when an entire organism, or a series of organisms consumes a substrate. 

The addition of sulfite to APS reductase results in changes of the flavin visible spectrum that are explained by the formation of an adduct between the sulfite and the FAD group (135). Addition of AMP to the as-isolated enzyme causes no change in the spectroscopic properties. Addition of AMP to the sulfite-reacted enzyme causes the reduction of center I. However, the formation of a semiquinone signal has never been observed either by EPR or visible spectroscopies. Also, Mossbauer and EPR data indicate that AMP closely interacts with center I (139). 

List of BVMOs that have been overexpressed in E. coli and of which the isolated enzyme has been characterized to some extend. 

Although the absolute configurations of the products are opposite to that of antiinflammatory active compounds, and the substrate specificity is rather restricted as to the steric bulkiness around the reaction center, the enzyme system of A. bronchisepticus was proved to have a unique reactivity. Thus, detailed studies on the isolated enzyme were expected to elucidate some new interesting mechanism of the new type of decarboxylation. Thus, the enzyme was purified. (The enzyme is now registered as EC 4.1.1.76.) The molecular mass was about 24kDa. The enzyme was named as arylmalonate decarboxylase (AMDase), as the rate of the decarboxylation of phenylmalonic acid was faster than that of the a-methyl derivative. ... 

The above two processes employ isolated enzymes - penicillin G acylase and thermolysin, respectively - and the key to their success was an efficient production of the enzyme. In the past this was often an insurmountable obstacle to commercialization, but the advent of recombinant DNA technology has changed this situation dramatically. Using this workhorse of modern biotechnology most enzymes can be expressed in a suitable microbial host, which enables their efficient production. As with chemical catalysts another key to success often is the development of a suitable immobilization method, which allows for efficient recovery and recycling of the biocatalyst. 

In some cases it is more attractive to use whole microbial cells, rather than isolated enzymes, as biocatalysts. This is the case in many oxidative biotransformations where cofactor regeneration is required and/or the enzyme has low stability outside the cell. By performing the reaction as a fermentation, i.e. with growing microbial cells, the cofactor is continuously regenerated from the energy source, e.g. glucose. 

Some of the industrial biocatalysts are nitrile hydralase (Nitto Chemicals), which has a productivity of 50 g acrylamide per litre per hour penicillin G amidase (Smith Kline Beechem and others), which has a productivity of 1 - 2 tonnes 6-APA per kg of the immobilized enzyme glucose isomerase (Novo Nordisk, etc.), which has a productivity of 20 tonnes of high fmctose syrup per kg of immobilized enzyme (Cheetham, 1998). Wandrey et al. (2000) have given an account of industrial biocatalysis past, present, and future. It appears that more than 100 different biotransformations are carried out in industry. In the case of isolated enzymes the cost of enzyme is expected to drop due to an efficient production with genetically engineered microorganisms or higher cells. Rozzell (1999) has discussed myths and realities... 

These data demonstrate that both GSH and GSSG have profound effects on Na/K ATPase activity and may act in concert to modify enzyme activity during oxidant stress. However, it should be recognized that the steric conformation of an isolated enzyme preparation in a chemically buffered solution may be considerably different to the native enzyme located in a dynamic lipid bilayer. For this reason, these investigations have been extended to include a variety of preparations in which the Na/K pump is in its native environment. 

The uncertainty in translating the observed effects in isolated enzyme and other biochemical systems to intact plant systems and... 

---