Ionic liquids room-temperature

Theoretical and applied aspects of microwave heating, as well as the advantages of its application are discussed for the individual analytical processes and also for the sample preparation procedures. Special attention is paid to the various preconcentration techniques, in part, sorption and extraction. Improvement of microwave-assisted solution preconcentration is shown on the example of separation of noble metals from matrix components by complexing sorbents. Advantages of microwave-assisted extraction and principles of choice of appropriate solvent are considered for the extraction of organic contaminants from solutions and solid samples by alcohols and room-temperature ionic liquids (RTILs). 

T. Welton, Room temperature ionic liquids. Solvents for synthesis and catalysis, Chem Rev 99 2071-2083 1999. C.M. Gordon, New developments in catalysis using ionic liquids, Appl. CatalA General 222 101-117 2001. 

Room-temperature ionic liquids, salts with A,A-dialkylimidazolium cations in synthesis and catalysis 99CRV2071. 

What constitutes an ionic liquid, as distinct from a molten salt It is generally accepted that ionic liquids have relatively low melting points, ideally below ambient temperature [1, 2]. The distinction is arbitrarily based on the salt exhibiting liquidity at or below a given temperature, often conveniently taken to be 100 °C. However, it is clear from observation that the principle distinction between the materials of interest today as ionic liquids (and more as specifically room-temperature ionic liquids) and conventional molten salts is that ionic liquids contain organic cations rather than inorganic ones. This allows a convenient differentiation without concern that some molten salts may have lower melting points than some ionic liquids . 

However, ionic liquids containing other classes of organic cations are known. Room-temperature ionic liquids containing organic cations including quaternary ammonium, phosphonium, pyridinium, and - in particular - imidazolium salts are currently available in combination with a variety of anions (Figure 3.1-1 provides some common examples) and have been studied for applications in electrochemistry [7, 8] and in synthesis [9-11]. 

In general, isotopic exchange is both expensive and difficult. In the case of many room-temperature ionic liquids, however, the manufacture of deuterated ionic liquids is relatively easily achievable. For example, the general synthesis of l-allcyl-3-methylimidazolium salts is shown in Scheme 4.1-1 [2]. This methodology allows maximum flexibility in the deuteration on the imidazolium cation that is, it can be either ring or side chain deuteration or both. 

Neutron diffraction has been used extensively to study a range of ionic liquid systems however, many of these investigations have focussed on high-temperature materials such as NaCl, studied by Enderby and co-workers [3]. A number of liquid systems with relatively low melting points have been reported, and this section summarizes some of the flndings of these studies. Many of the salts studied melt above 100 °C, and so are not room-temperature ionic liquids, but the same principles apply to the study of these materials as to the lower melting point salts. 

Bowron et al. [11] have performed neutron diffraction experiments on 1,3-dimethylimidazolium chloride ([MMIM]C1) in order to model the imidazolium room-temperature ionic liquids. The total structure factors, E(Q), for five 1,3-dimethylimidazolium chloride melts - fully probated, fully deuterated, a 1 1 fully deuterated/fully probated mixture, ring deuterated only, and side chain deuterated only - were measured. Figure 4.1-4 shows the probability distribution of chloride around a central imidazolium cation as determined by modeling of the neutron data. 

So far, there have been few published simulation studies of room-temperature ionic liquids, although a number of groups have started programs in this area. Simulations of molecular liquids have been common for thirty years and have proven important in clarifying our understanding of molecular motion, local stmcture and thermodynamics of neat liquids, solutions and more complex systems at the molecular level [1 ]. There have also been many simulations of molten salts with atomic ions [5]. Room-temperature ionic liquids have polyatomic ions and so combine properties of both molecular liquids and simple molten salts. 

These reactions occur with similar rates to those carried out in dipolar aprotic solvents such as DMF or DMSO. An advantage of using the room-temperature ionic liquid for this reaction is that the lower reaction temperatures result in higher selec-tivities for substitution on the oxygen or nitrogen atoms. The by-product (sodium or potassium halide) of the reaction can be extracted with water and the ionic liquid recycled. 

Beckmann rearrangements of several ketoximes were performed in room-temperature ionic liquids based on l,3-dialkylimida2olium or alkylpyridinium salts containing phosphorus compounds (such as PCI5) by Deng and Peng [59] (Scheme 5.1-31, BP = 1-butylpyridinium). Turnover numbers of up to 6.6 were observed, but the authors did not mention whether the ionic liquid could be reused. 

Scheme 5.1-62 The acetylation of benzene in a room-temperature ionic liquid.

The first example of homogeneous transition metal catalysis in an ionic liquid was the platinum-catalyzed hydroformylation of ethene in tetraethylammonium trichlorostannate (mp. 78 °C), described by Parshall in 1972 (Scheme 5.2-1, a)) [1]. In 1987, Knifton reported the ruthenium- and cobalt-catalyzed hydroformylation of internal and terminal alkenes in molten [Bu4P]Br, a salt that falls under the now accepted definition for an ionic liquid (see Scheme 5.2-1, b)) [2]. The first applications of room-temperature ionic liquids in homogeneous transition metal catalysis were described in 1990 by Chauvin et al. and by Wilkes et ak. Wilkes et al. used weekly acidic chloroaluminate melts and studied ethylene polymerization in them with Ziegler-Natta catalysts (Scheme 5.2-1, c)) [3]. Chauvin s group dissolved nickel catalysts in weakly acidic chloroaluminate melts and investigated the resulting ionic catalyst solutions for the dimerization of propene (Scheme 5.2-1, d)) [4]. 

Jacobsen subsequently reported a practical and efficient method for promoting the highly enantioselective addition of TMSN3 to meso-epoxides (Scheme 7.3) [4]. The chiral (salen)Cl-Cl catalyst 2 is available commercially and is bench-stable. Other practical advantages of the system include the mild reaction conditions, tolerance of some Lewis basic functional groups, catalyst recyclability (up to 10 times at 1 mol% with no loss in activity or enantioselectivity), and amenability to use under solvent-free conditions. Song later demonstrated that the reaction could be performed in room temperature ionic liquids, such as l-butyl-3-methylimidazo-lium salts. Extraction of the product mixture with hexane allowed catalyst recycling and product isolation without recourse to distillation (Scheme 7.4) [5]. 

Room temperature ionic liquids arc currently receiving considerable attention as environmentally friendly alternatives to conventional organic solvents in a variety of contexts.144 The ionic liquids have this reputation because of their high stability, inertness and, most importantly, extremely low vapor pressures. Because they are ionic and non-conducting they also possess other unique properties that can influence the yield and outcome of organic transformations. Polymerization in ionic liquids has been reviewed by Kubisa.145 Commonly used ionic liquids are tetra-alkylammonium, tetra-alkylphosphonium, 3-alkyl-l-methylimidazolium (16) or alkyl pyridinium salts (17). Counter-ions are typically PF6 and BF4 though many others are known. 

Room temperature ionic liquids are air stable, non-flammable, nonexplosive, immiscible with many Diels-Alder components and adducts, do not evaporate easily and act as support for the catalyst. They are useful solvents, especially for moisture and oxygen-sensitive reactants and products. In addition they are easy to handle, can be used in a large thermal range (typically —40 °C to 200 °C) and can be recovered and reused. This last point is particularly important when ionic liquids are used for catalytic reactions. The reactions are carried out under biphasic conditions and the products can be isolated by decanting the organic layer. 

Room temperature ionic liquids have been found to be excellent solvents for a number of reactions [50b] such as the isomerization [51], hydrogenation [52] and Friedel-Crafts reactions [53]. A number of Diels-Alder reactions were recently investigated in these systems. 

In recent years ionic liquids have also been employed as media for reactions catalyzed both by isolated enzymes and by whole cells, and excellent reviews on this topic are already available [47]. Biocatalysis has been mainly conducted in those room-temperature ionic liquids that are composed of a 1,3-dialkylimidazolium or N-alkylpyridinium cation and a noncoordinating anion [47aj. 

Aqueous solutions are not suitable solvents for esterifications and transesterifications, and these reactions are carried out in organic solvents of low polarity [9-12]. However, enzymes are surrounded by a hydration shell or bound water that is required for the retention of structure and catalytic activity [13]. Polar hydrophilic solvents such as DMF, DMSO, acetone, and alcohols (log P<0, where P is the partition coefficient between octanol and water) are incompatible and lead to rapid denaturation. Common solvents for esterifications and transesterifications include alkanes (hexane/log P=3.5), aromatics (toluene/2.5, benzene/2), haloalkanes (CHCI3/2, CH2CI2/I.4), and ethers (diisopropyl ether/1.9, terf-butylmethyl ether/ 0.94, diethyl ether/0.85). Exceptionally stable enzymes such as Candida antarctica lipase B (CAL-B) have been used in more polar solvents (tetrahydrofuran/0.49, acetonitrile/—0.33). Room-temperature ionic liquids [14—17] and supercritical fluids [18] are also good media for a wide range of biotransformations. 

Recently, room temperature ionic liquids (RT-ILs) have attracted much attention for their excellent properties, e.g., wide temperature range of liquid phase, ultra-low vapor pressure, chemical stability, potential as green solvents, and high heat capacities [64,65]. These properties make them good candidates for the use in many fields, such as thermal storage [66], electrochemical applications, homogeneous catalysis [67], dye sensitized solar cells [68], and lubricants [69,70]. 

Welton, T., Room-Temperature Ionic Liquids. Solvents for Synthesis and Catalysis, Chemical Review, Vol. 99, No. (8), 1999,pp.2071-2083. 

Recently, a eutectic mixture of choline chloride and urea (commercially known as Reline) was used as a medium from which CdS, as well as CdSe and ZnS, thin films were electrodeposited for the first time [53]. Reline is a conductive room-temperature ionic liquid (RTIL) with a wide electrochemical window. The voltammetric behavior of the Reline-Cd(II)-sulfur system was investigated, while CdS thin films were deposited at constant potential and characterized by photocurrent and electrolyte electroabsorbance spectroscopies. 

Room-temperature ionic liquids have received much attention as green designer solvents. We first demonstrated that ionic liquids acted as good medium for lipase-catalyzed production of polyesters. The polycondensation of diethyl adipate and 1,4-butanediol using lipase CA as catalyst efficiently proceeded in l-butyl-3-methylimidazolinium tetrafluoroborate or hexafluorophosphate under reduced pressure. The polymerization of diethyl sebacate and 1,4-butanediol in l-butyl-3-methylimidazolinium hexafluorophosphate took place even at room temperature in the presence of lipase BC. ... 

Welton, T. (1999) Room-Temperature Ionic Liquids. Solvents for Synthesis and Catalysis. 

Room temperature ionic liquids (RTILs), such as those based on A,A-dialkylimidazolium ions, are gaining importance (Bradley, 1999). The ionic liquids do not evaporate easily and thus there are no noxious fumes. They are also non-inflammable. Ionic liquids dissolve catalysts that are insoluble in conventional organic chemicals. IFP France has developed these solvents for dimerization, hydrogenation, isomerization, and hydroformylation reactions without conventional solvents. For butene dimerization a commercial process exists. RTILs form biphasic systems with the catalyst in the RTIL phase, which is immiscible with the reactants and products. This system is capable of being extended to a list of organometallic catalysts. Industrial Friedel-Crafts reactions, such as acylations, have been conducted and a fragrance molecule tra.seolide has been produced in 99% yield (Bradley, 1999). 

Whereas, Goharshadi et al. [16] have synthesized the ZnO nanoparticles of 60 nm (Fig. 8.4.) using a room temperature ionic liquid, l-hexyl-3-methylimidazolium bis (trifluoromethylsulfonyl)imide, Formation of ZnO was not observed when the ionic liquid was replaced by water. Also, in the absence of ultrasound, formation of ZnO was not observed which is very similar to the one as proposed in the previous case of ZnO dendritic nanostructures. 

Commonly is used a short term ionic liquid instead of room temperature ionic liquid or room temperature molten salt , which makes no distinction between salts liquid at room temperature and those liquid below 100°C. 

---