Infrared spectroscopy spectroscopic methods

Surface spectroscopic techniques must be separated carefully into those which require dehydration for sample presentation and those which do not. Among the former are electron microscopy and microprobe analysis, X-ray photoelectron spectroscopy, and infrared spectroscopy. These methods have been applied fruitfully to show the existence of either inner-sphere surface complexes or surface precipitates on minerals found in soils and sediments (13b,30,31-37), but the applicability of the results to natural systems is not without some ambiguity because of the dessication pretreatment involved. If independent experimental evidence for inner-sphere complexation or surface precipitation exists, these methods provide a powerful means of corroboration. 

PF McMillan, AM Hofmeister. In FC Hawthorne, ed. Infrared and Raman Spectroscopy. Spectroscopic Methods in Mineralogy and Geology. Chelsea, MI Book Crafters, 1988. 

Far-infrared and mid-infrared spectroscopy usually provide the most detailed picture of the vibration-rotation energy levels in the ground electronic state. However, they are not always possible and other spectroscopic methods are also important. 

Before the advent of NMR spectroscopy infrared (IR) spectroscopy was the mstrumen tal method most often applied to determine the structure of organic compounds Although NMR spectroscopy m general tells us more about the structure of an unknown com pound IR still retains an important place m the chemist s inventory of spectroscopic methods because of its usefulness m identifying the presence of certain functional groups within a molecule... 

Colorimetry, in which a sample absorbs visible light, is one example of a spectroscopic method of analysis. At the end of the nineteenth century, spectroscopy was limited to the absorption, emission, and scattering of visible, ultraviolet, and infrared electromagnetic radiation. During the twentieth century, spectroscopy has been extended to include other forms of electromagnetic radiation (photon spectroscopy), such as X-rays, microwaves, and radio waves, as well as energetic particles (particle spectroscopy), such as electrons and ions. ... 

The focus of this chapter is photon spectroscopy, using ultraviolet, visible, and infrared radiation. Because these techniques use a common set of optical devices for dispersing and focusing the radiation, they often are identified as optical spectroscopies. For convenience we will usually use the simpler term spectroscopy in place of photon spectroscopy or optical spectroscopy however, it should be understood that we are considering only a limited part of a much broader area of analytical methods. Before we examine specific spectroscopic methods, however, we first review the properties of electromagnetic radiation. 

Air Monitoring. The atmosphere in work areas is monitored for worker safety. Volatile amines and related compounds can be detected at low concentrations in the air by a number of methods. Suitable methods include chemical, chromatographic, and spectroscopic techniques. For example, the NIOSH Manual of Analytical Methods has methods based on gas chromatography which are suitable for common aromatic and aHphatic amines as well as ethanolamines (67). Aromatic amines which diazotize readily can also be detected photometrically using a treated paper which changes color (68). Other methods based on infrared spectroscopy (69) and mass spectroscopy (70) have also been reported. 

Other spectroscopic methods such as infrared (ir), and nuclear magnetic resonance (nmr), circular dichroism (cd), and mass spectrometry (ms) are invaluable tools for identification and stmcture elucidation. Nmr spectroscopy allows for geometric assignment of the carbon—carbon double bonds, as well as relative stereochemistry of ring substituents. These spectroscopic methods coupled with traditional chemical derivatization techniques provide the framework by which new carotenoids are identified and characterized (16,17). 

The presence of iminium salts can be detected by chemical means or by spectroscopic methods. The chemical means of detecting iminium salts are reactions with nucleophiles and are the subject of this review. The spectroscopic methods are more useful for rapid identification because with the large number of model compounds available now the spectroscopic methods are fast and reliable. The two methods that are used primarily are infrared and nuclear magnetic resonance spectroscopy. Some attempts have been made to determine the presence of iminium salts by ultraviolet spectroscopy, but these are not definitive as yet (14,25). 

Mass spectrometry, infrared spectroscopy, and nuclear magnetic resonance spectroscopy are techniques of structure determination applicable to all organic molecules. In addition to these three generally useful methods, there s a fourth—ultraviolet (UV) spectroscopy—that is applicable only to conjugated systems. UV is less commonly used than the other three spectroscopic techniques because of the specialized information it gives, so we ll mention it only briefly. 

High performance spectroscopic methods, like FT-IR and NIR spectrometry and Raman spectroscopy are widely applied to identify non-destructively the specific fingerprint of an extract or check the stability of pure molecules or mixtures by the recognition of different functional groups. Generally, the infrared techniques are more frequently applied in food colorant analysis, as recently reviewed. Mass spectrometry is used as well, either coupled to HPLC for the detection of separated molecules or for the identification of a fingerprint based on fragmentation patterns. ... 

It is only since 1980 that in situ spectroscopic techniques have been developed to obtain identification of the adsorbed intermediates and hence of reliable reaction mechanisms. These new infrared spectroscopic in situ techniques, such as electrochemically modulated infrared reflectance spectroscopy (EMIRS), which uses a dispersive spectrometer, Fourier transform infrared reflectance spectroscopy, or a subtractively normalized interfacial Fourier transform infrared reflectance spectroscopy (SNIFTIRS), have provided definitive proof for the presence of strongly adsorbed species (mainly adsorbed carbon monoxide) acting as catalytic poisons. " " Even though this chapter is not devoted to the description of in situ infrared techniques, it is useful to briefly note the advantages and limitations of such spectroscopic methods. 

Despite the considerable amount of information that has been garnered from more traditional methods of study it is clearly desirable to be able to generate, spectroscopically characterize and follow the reaction kinetics of coordinatively unsaturated species in real time. Since desired timescales for reaction will typically be in the microsecond to sub-microsecond range, a system with a rapid time response will be required. Transient absorption systems employing a visible or UV probe which meet this criterion have been developed and have provided valuable information for metal carbonyl systems [14,15,27]. However, since metal carbonyls are extremely photolabile and their UV-visible absorption spectra are not very structure sensitive, the preferred choice for a spectroscopic probe is time resolved infrared spectroscopy. Unfortunately, infrared detectors are enormously less sensitive and significantly slower... 

Infrared spectroscopy has been widely used for the qualitative and quantitative characterization of polymorphic and pseudopolymorphic compounds of pharmaceutical interest. Since solid state IR can be used to probe the nature of (pseudo)polymorphism on the molecular level, this method is particularly useful in instances where full crystallographic characterization of (pseudo)poly-morphism was not found to be possible. Recently, a significant number of publications have appeared that discuss where a multidisciplinary, spectroscopic... 

Spectroscopic Methods, [Biological] Applications of Spectroscopy, EPR, Recent Advances in (Smaller). Spectroscopy, Infrared, Use in Biology (Lecomte). Spectroscopy of Transition-Group Complexes (Jorgensen) Statistical-Mechanical Theory of Transport Processes. X. The Heat of Transport in Binary Liquid Systems (Bearman, Kirkwood, Fixman). ... 

---