Infrared analytical methods

The focus of this chapter is photon spectroscopy, using ultraviolet, visible, and infrared radiation. Because these techniques use a common set of optical devices for dispersing and focusing the radiation, they often are identified as optical spectroscopies. For convenience we will usually use the simpler term spectroscopy in place of photon spectroscopy or optical spectroscopy however, it should be understood that we are considering only a limited part of a much broader area of analytical methods. Before we examine specific spectroscopic methods, however, we first review the properties of electromagnetic radiation. 

The deterrnination of impurities in the hehum-group gases is also accompHshed by physical analytical methods and by conventional techniques for measuring the impurity in question (93), eg, galvanic sensors for oxygen, nondispersive infrared analysis for carbon dioxide, and electrolytic hygrometers for water. 

Air Monitoring. The atmosphere in work areas is monitored for worker safety. Volatile amines and related compounds can be detected at low concentrations in the air by a number of methods. Suitable methods include chemical, chromatographic, and spectroscopic techniques. For example, the NIOSH Manual of Analytical Methods has methods based on gas chromatography which are suitable for common aromatic and aHphatic amines as well as ethanolamines (67). Aromatic amines which diazotize readily can also be detected photometrically using a treated paper which changes color (68). Other methods based on infrared spectroscopy (69) and mass spectroscopy (70) have also been reported. 

Materials characterization techniques, ie, atomic and molecular identification and analysis, ate discussed ia articles the tides of which, for the most part, are descriptive of the analytical method. For example, both iaftared (it) and near iaftared analysis (nira) are described ia Infrared and raman SPECTROSCOPY. Nucleai magaetic resoaance (nmr) and electron spia resonance (esr) are discussed ia Magnetic spin resonance. Ultraviolet (uv) and visible (vis), absorption and emission, as well as Raman spectroscopy, circular dichroism (cd), etc are discussed ia Spectroscopy (see also Chemiluminescence Electho-analytical techniques It unoassay Mass specthot thy Microscopy Microwave technology Plasma technology and X-ray technology). 

There are a variety of analytical methods commonly used for the characterization of neat soap and bar soaps. Many of these methods have been pubUshed as official methods by the American Oil Chemists Society (29). Additionally, many analysts choose United States Pharmacopoeia (USP), British Pharmacopoeia (BP), or Pood Chemical Codex (FCC) methods. These methods tend to be colorimetric, potentiometric, or titrametric procedures. However, a variety of instmmental techniques are also frequendy utilized, eg, gas chromatography, high performance Hquid chromatography, nuclear magnetic resonance spectroscopy, infrared spectroscopy, and mass spectrometry. 

The field of steroid analysis includes identification of steroids in biological samples, analysis of pharmaceutical formulations, and elucidation of steroid stmctures. Many different analytical methods, such as ultraviolet (uv) spectroscopy, infrared (ir) spectroscopy, nuclear magnetic resonance (nmr) spectroscopy, x-ray crystallography, and mass spectroscopy, are used for steroid analysis. The constant development of these analytical techniques has stimulated the advancement of steroid analysis. 

Infrared Spectroscopy (ir). Infrared curves are used to identify the chemical functionality of waxes. Petroleum waxes with only hydrocarbon functionality show slight differences based on crystallinity, while vegetable and insect waxes contain hydrocarbons, carboxyflc acids, alcohols, and esters. The ir curves are typically used in combination with other analytical methods such as dsc or gc/gpc to characterize waxes. 

Analysis. The infrared (ii), ultraviolet M, and nuclear magnetic resonance (nmr) spectra are distinct and characteristic for benzene and are widely used in analysis (78—80). Benzene also produces diagnostic ions in the mass spectmm (81,82) (see Analytical methods). 

The modern electronic industry has played a very important role in the development of instrumentation based on physical-analytical methods As a result, a rapid boom in the fields of infrared, nuclear magnetic resonance (NMR), Raman, and mass spectroscopy and vapor-phase (or gas-liquid) chromatography has been observed. Instruments for these methods have become indispensable tools in the analytical treatment of fluonnated mixtures, complexes, and compounds The detailed applications of the instrumentation are covered later in this chapter. 

Semiquantitative Determination of Chimassorb 944 in Low Density Polyethylene Polymer by Infrared Spectroscopy. Analytical Method No. C-259, Ciba-Geigy, Ardsley, NY (1981). 

The strategy depends on the situation and how we measure the concentration. If we can rely on pH or absorbance (UV, visible, or Infrared spectrometer), the sensor response time can be reasonably fast, and we can make our decision based on the actual process dynamics. Most likely we would be thinking along the lines of PI or PID controllers. If we can only use gas chromatography (GC) or other slow analytical methods to measure concentration, we must consider discrete data sampling control. Indeed, prevalent time delay makes chemical process control unique and, in a sense, more difficult than many mechanical or electrical systems. 

Capillary electrophoresis has also been combined with other analytical methods like mass spectrometry, NMR, Raman, and infrared spectroscopy in order to combine the separation speed, high resolving power and minimum sample consumption of capillary electrophoresis with the selectivity and structural information provided by the other techniques [6]. 

The presence of group frequencies or "finger print" regions in infrared spectra make vibrational spectroscopy a key analytical method in identifying classes of molecules. 

Commonly used methods for the determination of petroleum hydrocarbon contamination in soil are modifications of Environmental Protection Agency method 418.1, which use sonication or a Soxhlet apparatus for analyte extraction and either infrared spectrometry [5] or gas chromatography with flame ionization detection [6-7] for extract analysis. Regardless of the analytical method following the extraction, both modifications use Freon-113, which has been implicated as a cause of ozone depletion. Therefore, alternative methods are being sought for the determination of hydrocarbon contamination in environmental samples that reduce the need for this halogenated solvent. 

To put things into perspective, we. can broadly classify these analytical methods into bulk, dry surface, and in situ interfacial techniques. This chapter focuses on the last category, illustrating two in situ techniques used to study anion binding at the goethite (a-FeOOH)-water interface titration calorimetry and cylindrical internal reflection-Fourier transform infrared (CIR-FTIR) spectroscopy. In fact, CIR-FTIR could prove to be extremely powerful, since it allows direct spectroscopic observation of ions adsorbed at the mineral-water interface. 

Any analytical method [312] suitable for determining equilibrium compositions of a reaction mixture at several temperatures can be used to obtain the enthalpy and the entropy of that reaction. The first example we describe involves a common analytical technique (infrared absorption spectroscopy) and addresses the energetics of the hydrogen bond between phenol and acetonitrile. This careful study on the equilibrium 14.6 was made by Sousa Lopes and Thompson more than 30 years ago [313]. 

Near infrared spectroscopy (NIRS), a technique based on absorption and reflectance of monochromatographic radiation by samples over a wavelength range of 400-2500 run, has been successfully applied for food composition analysis, for food quality assessment, and in pharmaceutical production control. NIRS can be used to differentiate various samples via pattern recognitions. The technique is fast and nondestructive method that does not require sample preparation and is very simple to use compared too many other analytical methods such as HPLC. The drawback of NIRS, however, is that the instrument has to be calibrated using a set of samples typically 20-50 with known analyte concentrations obtained by suitable reference methods such as FIPLC in order to be used for quantitative analyses. Simultaneous quantification of the... 

There are many analytical techniques available that measure total petroleum hydrocarbon concentrations in the environment, but no single method is satisfactory for measurement of the entire range of petroleum-derived hydrocarbons. In addition, and because the techniques vary in the manner in which hydrocarbons are extracted and detected, each method may be applicable to the measurement of different subsets of the petroleum-derived hydrocarbons present in a sample. The four most commonly used total petroleum hydrocarbon analytical methods include (1) gas chromatography (GC), (2) infrared spectrometry (IR), (3) gravimetric analysis, and (4) immunoassay (Table 7.1) (Miller, 2000, and references cited therein). 

Methods based on gravimetric analysis (Table 7.2) are also simple and rapid, but they suffer from the same limitations as those of infrared spectrometric methods (Table 7.2). Gravimetric-based methods may be useful for oily sludge and wastewaters, which will present analytical difficulties for other, more sensitive methods. Immunoassay methods for the measurement of total petroleum hydrocarbon are also popular for field testing because they offer a simple, quick technique for in situ quantification of the total petroleum hydrocarbons. 

---