Analytical methods infrared techniques

As described in Section 3.1, Baier et al. (1974) have used a machined germanium prism to sample surface organic monolayers in the manner developed earlier by Blodgett (1934,1935) for fatty acid films. The basis of their analytical method, infrared spectroscopy by the technique of internal reflections inside the machined prisms, is only qualitative but serves very well to examine the chemical nature of the surface organics. It is well known that when an internal reflection prism made of a material with a sufficiently high index of refiraction such as germanium is used, the internal reflection IR spectrum obtained suffers no band distortion or band shift when compared to conventional transmission spectra of the same substance (Barr and Flournoy, 1969). 

The focus of this chapter is photon spectroscopy, using ultraviolet, visible, and infrared radiation. Because these techniques use a common set of optical devices for dispersing and focusing the radiation, they often are identified as optical spectroscopies. For convenience we will usually use the simpler term spectroscopy in place of photon spectroscopy or optical spectroscopy however, it should be understood that we are considering only a limited part of a much broader area of analytical methods. Before we examine specific spectroscopic methods, however, we first review the properties of electromagnetic radiation. 

The deterrnination of impurities in the hehum-group gases is also accompHshed by physical analytical methods and by conventional techniques for measuring the impurity in question (93), eg, galvanic sensors for oxygen, nondispersive infrared analysis for carbon dioxide, and electrolytic hygrometers for water. 

Air Monitoring. The atmosphere in work areas is monitored for worker safety. Volatile amines and related compounds can be detected at low concentrations in the air by a number of methods. Suitable methods include chemical, chromatographic, and spectroscopic techniques. For example, the NIOSH Manual of Analytical Methods has methods based on gas chromatography which are suitable for common aromatic and aHphatic amines as well as ethanolamines (67). Aromatic amines which diazotize readily can also be detected photometrically using a treated paper which changes color (68). Other methods based on infrared spectroscopy (69) and mass spectroscopy (70) have also been reported. 

Materials characterization techniques, ie, atomic and molecular identification and analysis, ate discussed ia articles the tides of which, for the most part, are descriptive of the analytical method. For example, both iaftared (it) and near iaftared analysis (nira) are described ia Infrared and raman SPECTROSCOPY. Nucleai magaetic resoaance (nmr) and electron spia resonance (esr) are discussed ia Magnetic spin resonance. Ultraviolet (uv) and visible (vis), absorption and emission, as well as Raman spectroscopy, circular dichroism (cd), etc are discussed ia Spectroscopy (see also Chemiluminescence Electho-analytical techniques It unoassay Mass specthot thy Microscopy Microwave technology Plasma technology and X-ray technology). 

There are a variety of analytical methods commonly used for the characterization of neat soap and bar soaps. Many of these methods have been pubUshed as official methods by the American Oil Chemists Society (29). Additionally, many analysts choose United States Pharmacopoeia (USP), British Pharmacopoeia (BP), or Pood Chemical Codex (FCC) methods. These methods tend to be colorimetric, potentiometric, or titrametric procedures. However, a variety of instmmental techniques are also frequendy utilized, eg, gas chromatography, high performance Hquid chromatography, nuclear magnetic resonance spectroscopy, infrared spectroscopy, and mass spectrometry. 

The field of steroid analysis includes identification of steroids in biological samples, analysis of pharmaceutical formulations, and elucidation of steroid stmctures. Many different analytical methods, such as ultraviolet (uv) spectroscopy, infrared (ir) spectroscopy, nuclear magnetic resonance (nmr) spectroscopy, x-ray crystallography, and mass spectroscopy, are used for steroid analysis. The constant development of these analytical techniques has stimulated the advancement of steroid analysis. 

Capillary electrophoresis has also been combined with other analytical methods like mass spectrometry, NMR, Raman, and infrared spectroscopy in order to combine the separation speed, high resolving power and minimum sample consumption of capillary electrophoresis with the selectivity and structural information provided by the other techniques [6]. 

To put things into perspective, we. can broadly classify these analytical methods into bulk, dry surface, and in situ interfacial techniques. This chapter focuses on the last category, illustrating two in situ techniques used to study anion binding at the goethite (a-FeOOH)-water interface titration calorimetry and cylindrical internal reflection-Fourier transform infrared (CIR-FTIR) spectroscopy. In fact, CIR-FTIR could prove to be extremely powerful, since it allows direct spectroscopic observation of ions adsorbed at the mineral-water interface. 

Any analytical method [312] suitable for determining equilibrium compositions of a reaction mixture at several temperatures can be used to obtain the enthalpy and the entropy of that reaction. The first example we describe involves a common analytical technique (infrared absorption spectroscopy) and addresses the energetics of the hydrogen bond between phenol and acetonitrile. This careful study on the equilibrium 14.6 was made by Sousa Lopes and Thompson more than 30 years ago [313]. 

Near infrared spectroscopy (NIRS), a technique based on absorption and reflectance of monochromatographic radiation by samples over a wavelength range of 400-2500 run, has been successfully applied for food composition analysis, for food quality assessment, and in pharmaceutical production control. NIRS can be used to differentiate various samples via pattern recognitions. The technique is fast and nondestructive method that does not require sample preparation and is very simple to use compared too many other analytical methods such as HPLC. The drawback of NIRS, however, is that the instrument has to be calibrated using a set of samples typically 20-50 with known analyte concentrations obtained by suitable reference methods such as FIPLC in order to be used for quantitative analyses. Simultaneous quantification of the... 

There are many analytical techniques available that measure total petroleum hydrocarbon concentrations in the environment, but no single method is satisfactory for measurement of the entire range of petroleum-derived hydrocarbons. In addition, and because the techniques vary in the manner in which hydrocarbons are extracted and detected, each method may be applicable to the measurement of different subsets of the petroleum-derived hydrocarbons present in a sample. The four most commonly used total petroleum hydrocarbon analytical methods include (1) gas chromatography (GC), (2) infrared spectrometry (IR), (3) gravimetric analysis, and (4) immunoassay (Table 7.1) (Miller, 2000, and references cited therein). 

FTIR Fourier transform infrared spectroscopy has been used for many years to measure atmospheric gases. Because FTIR has become such a common analytical method, we do not describe the technique itself here but rather refer the reader to several excellent books and articles on the subject (e.g., see Griffiths and de Haseth, 1986 Wayne, 1987). For reviews of some atmospheric applications, see Tuazon etal. (1978,1980), Marshall et al. (1994), and Hanst and Hanst (1994). 

Although a number of secondary minerals have been predicted to form in weathered CCB materials, few have been positively identified by physical characterization methods. Secondary phases in CCB materials may be difficult or impossible to characterize due to their low abundance and small particle size. Conventional mineral identification methods such as X-ray diffraction (XRD) analysis fail to identify secondary phases that are less than 1-5% by weight of the CCB or are X-ray amorphous. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM), coupled with energy dispersive spectroscopy (EDS), can often identify phases not seen by XRD. Additional analytical methods used to characterize trace secondary phases include infrared (IR) spectroscopy, electron microprobe (EMP) analysis, differential thermal analysis (DTA), and various synchrotron radiation techniques (e.g., micro-XRD, X-ray absorption near-eidge spectroscopy [XANES], X-ray absorption fine-structure [XAFSJ). 

Modem analytical techniques have been developed for complete characterization and evaluation of a wide variety of sulfonic acids and sulfonates. The analytical methods for free sulfonic acids and sulfonate salts have been compiled (28). Titration is the most straightforward method of evaluating sulfonic acids produced on either a laboratory or an industrial scale (29,30). Spectroscopic methods for sulfonic acid analysis include ultraviolet spectroscopy, infrared spectroscopy, and 1H and 13C nmr spectroscopy (31). Chromatographic separation techniques, such as gc and gc/ms, are not used for free... 

The analytical method for moisture determination must be validated before use during process validation studies. There are numerous techniques for moisture analysis that range from physical methods, such as loss on drying, to chemical methods, such as Karl Fisher titration. A comparative review of the conventional techniques are presented in an overview [32], The measurement of residual moisture is lyophilized pharmaceuticals by near-infrared (NIR) spectroscopy has recently been expanded [33]. 

---