Detector inductively coupled plasma-mass

A novel interface to connect a ce system with an inductively coupled plasma mass spectrometric (icpms) detector has been developed (88). The interface was built using a direct injection nebulizer (din) system. The ce/din/icpms system was evaluated using samples containing selected alkah, alkaline earths, and heavy-metal ions, as well as selenium (Se(IV) and Se(VI)), and various inorganic and organic arsenic species. The preliminary results show that the system can be used to determine metal species at ppt to ppb level. 

Multiple-collector inductively coupled plasma mass spectrometry (MC-ICPMS) combines sector-field ICPMS with a multiple collector detector system and has recently emerged as an alternative to TIMS for precise U-Th isotope measurement. The full potential of MC-ICPMS has yet to be realized. Yet despite this, its performance in high precision isotope measurement already challenges and, in some cases, surpasses that ever achieved by TIMS (e.g., Lee and Halliday 1995 Blichert-Toft and Albarede 1997). 

Bloxam et al. [482] used liquid chromatography with an inductively coupled plasma mass spectrometric detector in speciation studies on ppt levels of mercury in seawater. 

Transient signals are typically obtained in atomic spectrometry when samples are introduced by flow injection techniques or when the spectrometer is used as an element-specific detector in hyphenated techniques. Inductively coupled plasma mass spectrometry has nowadays become the detection technique of choice for multielement-specific detection in speciation as it allows multielemental... 

A. Woller, H. Garraud, J. Boisson, A. M. Dorthe, P. Fodor and O. F. X. Donard, Simultaneuous speciation of redox species of arsenic and selenium using an anion-exchange microbore column coupled with a micro-concentric nebuliser and an inductively coupled plasma mass spectrometer as detector, J. Anal. At. Spectrom., 13, 1998, 141-149. 

A 9 mL aliquot from each TIMS sample solution was submitted to the University of Georgia, Laboratory for Environmental Analysis, for inductively coupled plasma-mass spectrometry analysis (ICP-MS). A Perkin-Elmer Elan 6000 ICP-MS with quadrapole chamber mass detector system was used to analyze the solution for Ag, As, Cu, Sb, Sn, Pb, and Zn. Insufficient sample remained for further analysis or replicate samples. However, all appropriate blanks, dilutions, and standards were run. 

Atomic spectrometric methods Here, the entire sample is atomized or ionized either by flame or inductively coupled plasma and transferred into the detector. The most common techniques in this class are flame atomic absorption spectrometry (FAAS) and inductively coupled plasma mass spectrometry (ICPMS). A general characteristic of these methods is the determination of the total concentration of the analyte without the direct possibility of distinguishing its specific forms in the sample. 

Taylor, H. E., Garbarino, J. R., Murphy, D. M., and Beckett, R. (1992). Inductively coupled-plasma-mass spectrometry as an element-specific detector for field-flow fractionation particle separation. Anal. Chem. 64, 2036-2041. 

Inductively coupled plasma-mass spectrometry (ICP-MS) is a powerful technique that uses an inductively coupled plasma as an ion source and a mass spectrometer as an ion analyzer. It can measure the presence of more than 75 elements in a single scan, and can achieve detection limits down to parts per trillion (ppt) levels for many elements—levels that are two or three orders of magnitude lower than those obtained by ICP-AES (Keeler 1991). It is more expensive than ICP-AES and requires more highly skilled technical operation. Aluminum levels in urine and saliva were detected down to 0.02 g/mL and in blood serum to 0.001 g/mL using ICP-MS (Ward 1989). Speciation studies have employed ICP-MS as a detector for aluminum in tissue fractions separated by size-exclusion chromatography (SEC) with detection limits of 0.04 g/g in femur, kidney and brain (Owen et al. 1994). 

Ultraviolet-visible (UV-Vis) spectrophotometric detectors are used to monitor chromatographic separations. However, this type of detection offers very little specificity. Element specific detectors are much more useful and important. Atomic absorption spectrometry (AAS), inductively coupled plasma-atomic emission spectroscopy (ICPAES) and inductively coupled plasma-mass spectrometry (ICP-MS) are often used in current studies. The highest sensitivity is achieved by graphite furnace-AAS and ICP-MS. The former is used off-line while the latter is coupled to the chromatographic column and is used on-line . 

Figure 1 Schematic diagram of a typical commercial inductively coupled plasma mass spectrometry (ICP-MS) instrument (A) liquid sample, (B) peristaltic pump, (C) nebulizer, (D) spray chamber, (E) argon gas inlets, (F) load coil, (G) sampler cone, (H) skimmer cone, (I) ion lenses, (J) quadrupole, (K) electron multiplier detector, (L) computer.

Figure 14 Chromatogram of a mixture of organotin compounds, recorded with the inductively coupled plasma mass spectrometer (ICP-MS) coupled to the gas chromatograph (GC) with custom-made transfer line. Injection temperature, 240°C split, 1/20 detector, ICP-MS. Transfer line temperature 250°C carrier gas, Ar. (b) Chromatogram of a mixture of organotin compounds, recorded with the FID detector. Injection temperature, 240°C detector FID carrier gas Ar. (From Ref. 91.)...

G. Raber, K. A. Francesconi, K. J. Irgolic, W. Goessler, Determination of arsenosugars in algae with anion-exchange chromatography and inductively coupled plasma mass spectrometry as element specific detector, Fresenius J. Anal. Chem., 367 (2000), 181-188. 

Conductivity detection performed with a contactless conductivity detector through the packed bed was shown to be a more versatile and sensitive method than indirect UV detection [77]. Chen et al. employed inductively couple plasma mass spectrometry (ICP MS) as a detection tool for the simultaneous analysis of various ionic species of arsenic, chromium, and selenium [79]. The separation was achieved on an OT CEC column prepared by bonding a macrocyclic polyamine medium on the walls of the capillary. 

Beckett described inductively coupled plasma mass spectrometry (ICP-MS) as an off-line detector for FFF which could be applied to collected fractions [ 149]. This detector is so sensitive that even trace elements can be detected making it very useful for the analysis of environmental samples where the particle size distribution can be determined together with the amount of different ele-ments/pollutants, etc. in the various fractions. In case of copolymers, ICP-MS detection coupled to Th-FFF was suggested to yield the ratio of the different monomers as a function of the molar mass. In several works, the ICP-MS detector was coupled on-line to FFF [150,151]. This on-line coupling proved very useful for detecting changes in the chemical composition of mixtures, in the described case of the clay minerals kaolinite and illite as natural suspended colloidal matter. 

The second major environmental application of FFF has been the use of an element-specific detector, usually in series with a UV detector, to provide elemental composition data along with the PSD. Graphite-furnace atomic absorption spectrometry has been used off-line on fractions collected from the FFF run. However, the multi-element detection, low detection limits and capability to function as an online detector have made inductively coupled plasma mass spectrometry (ICP-MS) the ideal detector for FFE85-86 The sample introduction system of the ICP-MS is able to efficiently transport micron-sized particles into the high-temperature plasma,... 

Q. Tu, T. B. Wang, X. Jia, and X. Bn, Speciation analysis of halogenides and oxyhalogens by ion chromatography with inductively coupled plasma mass spectrometer as element-specific detector, Merck Research Laboratories internal communication. 

As noted earlier, USNs have been employed for sample insertion into atomic spectrometers suoh as flame atomio absorption spectrometry (FAAS) [9,10], electrothermal atomic absorption speotrometry (ETAAS) [11], atomic fluorescence spectrometry (AFS) [12,13], induotively ooupled plasma-atomic emission spectrometry (ICP-AES) [14,15], inductively coupled plasma-mass spectrometry (ICP-MS) [16,17] and microwave induced plasma-atomic emission spectrometry (MIP-AES) [18,19]. Most of the applications of ultrasonic nebulization (USNn) involve plasma-based detectors, the high sensitivity, selectivity, precision, resolution and throughput have fostered their implementation in routine laboratories despite their high cost [4]. 

The Inductively Coupled Plasma-Mass Spectrometry Detector... 

Fig. 1 The inductively coupled plasma-mass spectrometer (ICP-MS) used as a detector for high-performance liquid chromatography (HPLC). The liquid sample passes through the capillary into a nebulizer where it is changed into an aerosol. The aerosol passes through a spray chamber and into the plasma. The analytes pass into the mass spectrometer. The CE interface is not in detail in this figure.

To overcome the problem of detection in CE, many workers have used inductively coupled plasma-mass spectrometry (ICP-MS) as the method of detection. " Electrochemical detection in CE includes conductivity, amperometry, and potentiometry detection. The detection limit of amperometric detectors has been reported to be up to 10 M. A special design of the conductivity cell has been described by many workers. The pulsed-amperometric and cyclic voltametry waveforms, as well as multi step waveforms, have been used as detection systems for various pollutants. Potentiometric detection in CE was first introduced in 1991 and was further developed by various workers.8-Hydroxyquino-line-5-sulfonic acid and lumogallion exhibit fluorescent properties and, hence, have been used for metal ion detection in CE by fluorescence detectors.Over-... 

Much more sensitive and less time-consuming techniques such as mass spectrometry, atomic emission, and atomic absorption are needed for the analysis of pollutants. Detectors such as graphite furnace-atomic absorption spectrometer (GF-AAS), inductively coupled plasma-mass spectrometer (ICP-MS), or inductively coupled plasma-atomic emission spectrometer (ICP-AES) seem to be ideal candidates for the analysis of trace metals because of their very low detection limits. The high temperatures used avoid the need for tedious digestions in many samples. FFF-gas chromatography-mass spectrometry could perhaps be used in the analysis of particular organic molecules. 

---