Graft copolymers glycol /styrene

II. B polyethylene glycol, ethylene oxide, polystyrene, diisocyanates (urethanes), polyvinylchloride, chloroprene, THF, diglycolide, dilac-tide, <5-valerolactone, substituted e-caprolactones, 4-vinyl anisole, styrene, methyl methacrylate, and vinyl acetate. In addition to these species, many copolymers have been prepared from oligomers of PCL. In particular, a variety of polyester-urethanes have been synthesized from hydroxy-terminated PCL, some of which have achieved commercial status (9). Graft copolymers with acrylic acid, acrylonitrile, and styrene have been prepared using PCL as the backbone polymer (60). 

In Figure 6 the result of a rapid density gradient centrifugation is shown using this system. It deals with a graft copolymer latex of butadiene and styrene acrylonitrile. The gradient media are different mixtures of 3-butene-2-ol and ethylene glycol. 

PVC can be blended with numerous other polymers to give it better processability and impact resistance. For the manufacture of food contact materials the following polymerizates and/or polymer mixtures from polymers manufactured from the above mentioned starting materials can be used Chlorinated polyolefins blends of styrene and graft copolymers and mixtures of polystyrene with polymerisate blends butadiene-acrylonitrile-copolymer blends (hard rubber) blends of ethylene and propylene, butylene, vinyl ester, and unsaturated aliphatic acids as well as salts and esters plasticizerfrec blends of methacrylic acid esters and acrylic acid esters with monofunctional saturated alcohols (Ci-C18) as well as blends of the esters of methacrylic acid butadiene and styrene as well as polymer blends of acrylic acid butyl ester and vinylpyrrolidone polyurethane manufactured from 1,6-hexamethylene diisocyanate, 1.4-butandiol and aliphatic polyesters from adipic acid and glycols. 

Fmoc-aminomethyl-3,5-dimethoxyphen-oxy)valeric acid PEG, polyethylene glycol PEG-PS, polyethylene glycol-cross-linked polystyrene graft copolymer PS, copoly-(styrene-1% divinylbenzene) polymeric support , resin SPPS, solid-phase peptide synthesis tBu, tert.-butyl TEA, trifluoro-acetic acid TFE, trifluoroethanol THF, te-trahydrofuran TLC, thin-layer chromatography. Amino acid symbols denote the L-con-figuration. All solvent ratios and percentages are v/v unless stated otherwise. 

TEC is a useful technique for separating polymers into molecular weight fractions on a fairly small scale. It has been used to fractionate PET [135, 136], styrene-butadiene copolymers [137], styrene acrylonitrile copolymers [138], polyoxypropylene glycols [136], Nylon-styrene graft copolymers and PMMA [139-141], styrene-methacrylate copolymers [142], poly-a-methylstyrene [143], polyvinyl acetate-styrene copolymers, and polyvinyl alcohol-styrene copolymers [144]. 

ESR spectroscopy has been applied to studies of unsaturation and other structural features in a wide range of homopolymers including polyethylene [101-110], polypropylene [111-121], polybutenes [115], polystyrene [122-124], PVC [125,126], polyvinylidene chloride [127], polymethylmethacrylate [128-137], polyethylene glycol polycarbonates [137-140], polyacrylic acid [136-139, 141, 142], polyphenylenes [143], polyphenylene oxides [143], polybutadiene [144], conjugated dienes [145,146], polyester resins [146], cellophane [143,147] and also to various copolymers including styrene grafted polypropylene [148], ethylene-acroline [149], butadiene-isobutylene [150], vinyl acetate copolymers [151] and vinyl chloride-propylene. 

Another interesting design of mixed polymer brushes was obtained by sequential grafting of asymmetric nonsticky/sticky diblock copolymers of poly(styrene-b-3-(trimethoxysilyl)propylmethacrylate) and monomethoxypoly(ethylene glycol)-trimethoxysilane onto silicon wafers (Han et al., 2013). The nanoscopic morphology of these mixed polymer brushes exhibited stimuli responsive behavior to various temperatures and solvents. 

Tg measurements have been performed on many other polymers and copolymers including phenol bark resins [71], PS [72-74], p-nitrobenzene substituted polymethacrylates [75], PC [76], polyimines [77], polyurethanes (PU) [78], Novolac resins [71], polyisoprene, polybutadiene, polychloroprene, nitrile rubber, ethylene-propylene-diene terpolymer and butyl rubber [79], bisphenol-A epoxy diacrylate-trimethylolpropane triacrylate [80], mono and dipolyphosphazenes [81], polyethylene glycol-polylactic acid entrapment polymers [82], polyether nitrile copolymers [83], polyacrylate-polyoxyethylene grafts [84], Novolak type thermosets [71], polyester carbonates [85], polyethylene naphthalene, 2,6, dicarboxylate [86], PET-polyethylene 2,6-naphthalone carboxylate blends [87], a-phenyl substituted aromatic-aliphatic polyamides [88], sodium acrylate-methyl methacrylate multiblock copolymers [89], telechelic sulfonate polyester ionomers [90], aromatic polyamides [91], polyimides [91], 4,4"-bis(4-oxyphenoxy)benzophenone diglycidyl ether - 3,4 epoxycyclohexyl methyl 3,4 epoxy cyclohexane carboxylate blends [92], PET [93], polyhydroxybutyrate [94], polyetherimides [95], macrocyclic aromatic disulfide oligomers [96], acrylics [97], PU urea elastomers [97], glass reinforced epoxy resin composites [98], PVOH [99], polymethyl methacrylate-N-phenyl maleimide, styrene copolymers [100], chiral... 

---