Formic acid, naming

Write equations for the reaction of (a) ethanol and formic acid (b) propanol and propionic acid (c) methanol and formic acid. Name the esters produced. 

The decomposition of acetic acid may be formulated in a way similar to that of formic acid namely as follows ... 

Organosulfur Halides. When sulfur is directly linked only to an organic radical and to a halogen atom, the radical name is attached to the word sulfur and the name(s) and number of the halide(s) are stated as a separate word. Alternatively, the name can be formed from R—SOH, a sulfenic acid whose radical prefix is sulfenyl-. For example, CH3CH2—S — Br would be named either ethylsulfur monobromide or ethanesulfenyl bromide. When another principal group is present, a composite prefix is formed from the number and substitutive name(s) of the halogen atoms in front of the syllable thio. For example, BrS—COOH is (bromothio)formic acid. 

The common method of naming aldehydes corresponds very closely to that of the related acids (see Carboxylic acids), in that the term aldehyde is added to the base name of the acid. For example, formaldehyde (qv) comes from formic acid, acetaldehyde (qv) from acetic acid, and butyraldehyde (qv) from butyric acid. If the compound contains more than two aldehyde groups, or is cycHc, the name is formed using carbaldehyde to indicate the functionaUty. The lUPAC system of aldehyde nomenclature drops the final e from the name of the parent acycHc hydrocarbon and adds al If two aldehyde functional groups are present, the suffix -dialis used. The prefix formjlis used with polyfunctional compounds. Examples of nomenclature types are shown in Table 1. 

Nylon-11. Nylon-11 [25035-04-5] made by the polycondensation of 11-aminoundecanoic acid [2432-99-7] was first prepared by Carothers in 1935 but was first produced commercially in 1955 in France under the trade name Kilsan (167) Kilsan is a registered trademark of Elf Atochem Company. The polymer is prepared in a continuous process using phosphoric or hypophosphoric acid as a catalyst under inert atmosphere at ambient pressure. The total extractable content is low (0.5%) compared to nylon-6 (168). The polymer is hydrophobic, with a low melt point (T = 190° C), and has excellent electrical insulating properties. The effect of formic acid on the swelling behavior of nylon-11 has been studied (169), and such a treatment is claimed to produce a hard elastic fiber (170). 

In eadier Hterature carbonochloridic esters are referred to as chloroformates or chlorocarbonates because of the stmctural parallel with formic acid [64-18-6]., chloroformic acid, and carbonic acid. Before 1972, chloroformates were indexed in Chemicaly4bstracts, Eighth Collective Index, under formic acid, chloroesters whereas, in the Ninth Collective Index (Dec. 1990), they are referred to as carbonochloridic acid esters. Table 1 fists the common names of carbonochloridates or chloroformates, the CAS Registry Numbers, and the formulas. 

A SEC material should be hydrophilic if it is to be used for biological applications. One such material, introduced by PolyLC in 1990 (8), is silica with a covalently attached coating of poly(2-hydroxyethyl aspartamide) the trade name is PolyHYDROXYETHYL Aspartamide (PolyHEA). This material was evaluated for SEC of polypeptides by P.C. Andrews (University of Michigan) and worked well for the purpose (Fig. 8.1). Because formic acid is a good solvent for polypeptides, Dr. Andrews tried a mobile phase of 50 mM formic acid. The result was a dramatic shift to a lower fractionation range for both Vq and V, (Fig. 8.2) to the point that V, was defined by the elution position of water. 

Schimmel Co. have isolated a sesquiterpene alcohol from Samoan resin, known as Maali resin, and by dehydrating it by means of formic acid have obtained a sesquiterpene which has not been named other than as Maali sesquiterpene. It has the following characters —... 

The common name of an ester consists of two words. The first word (methyl, ethyl,...) is derived from that of the alcohol the second word (formate, acetate,...) is the name of the acid with the -ic suffix replaced by -ate. Thus ethyl formate (Table 22.4) is made from ethyl alcohol and formic acid ... 

Carboxylic acids are named systematically by replacing the -e of the parent hydrocarbon by the suffix -oic acid the carbon atom of the carboxyl group is included in the count of atoms to determine the parent hydrocarbon molecule. Thus, formic acid is formally methanoic acid, and acetic acid is ethanoic acid. 

The name of a carboxylic acid always ends in -ic, and the name of the anion ends in -ate. Figure 17-9 shows three simple carboxylic acids formic acid ( K = 1.8 x 10 ), acetic acid ( K — 1.8 X 10 ), and benzoic acid ( Ta = 6.4 X 10 ). HCO2 is formate, CH3 CO2 is acetate, and Cg H5 CO2 is benzoate. Examples and treat benzoic acid quantitatively. 

Owing to its excellent thermal and mechanical stability and its rich chemistry, alumina is the most widely used support in catalysis. Although aluminium oxide exists in various structures, only three phases are of interest, namely the nonporous, crys-tallographically ordered a-Al203, and the porous amorphous t]- and y-Al203. The latter is also used as a catalyst by itself, for example in the production of elemental sulfur from H2S (the Claus process), the alkylation of phenol or the dehydration of formic acid. 

Solutions of Moiseev s giant Pd colloids [49,161-166] were shown to catalyze a number of reactions in the quasi homogeneous phase, namely oxidative ace-toxylation reactions [162], the oxidative carbonylation of phenol to diphenyl carbonate [166], the hydrogen-transfer reduction of multiple bonds by formic acid [387], the... 

In an industrial application dissolution/reprecipitation technology is used to separate and recover nylon from carpet waste [636]. Carpets are generally composed of three primary polymer components, namely polypropylene (backing), SBR latex (binding) and nylon (face fibres), and calcium carbonate filler. The process involves selective dissolution of nylon (typically constituting more than 50wt% of carpet polymer mass) with an 88 wt % liquid formic acid solution and recovery of nylon powder with scCC>2 antisolvent precipitation at high pressure. Papaspyrides and Kartalis [637] used dimethylsulfoxide as a solvent for PA6 and formic acid for PA6.6, and methylethylketone as the nonsolvent for both polymers. 

Other ant species also use formic acid as a weapon. In fact, this acid is fairly common in ants. It got its name from the Latin word formica, which means ant. Some ants, such as the red ant, inject formic acid into their victims just as bees do. Ants, bees, and wasps actually all belong to the same biological order, Hymenoptera. Animals in this order have an ovipositor (a special organ for depositing eggs in hard to reach places). In some ants, bees, and wasps, this ovipositor has evolved into a stinger that is used to inject venom instead of eggs. 

COMPOUND NAME CHLORODIFLUOROMETHANE DICHLOROFLUOROMETHANE CHLOROFORM HYDROGEN CYANIDE DIBROMOMETHANE DICHLOROMETHANE FORMALDEHYDE FORMIC ACID METHYL BROMIDE METHYL CHLORIDE METHYL FLUORIDE METHYL IODIDE NITROMETHANE METHANE METHANOL METHYL MERCAPTAN METHYL AMINE METHYL HYDRAZINE METHYL SILANE... 

M. Faraday was the first to observe an electrocatalytic process, in 1834, when he discovered that a new compound, ethane, is formed in the electrolysis of alkali metal acetates (this is probably the first example of electrochemical synthesis). This process was later named the Kolbe reaction, as Kolbe discovered in 1849 that this is a general phenomenon for fatty acids (except for formic acid) and their salts at higher concentrations. If these electrolytes are electrolysed with a platinum or irridium anode, oxygen evolution ceases in the potential interval between +2.1 and +2.2 V and a hydrocarbon is formed according to the equation... 

SHU [Saarberg-Holter-Lurgi] A flue-gas desulfurization process using wet limestone as the sembbing medium, assisted by the addition of dilute formic acid. Developed by the companies named, and used in 11 power stations in Germany and Turkey in 1987. 

Fig. 3.38.The IUPAC names of Sudan azo dyes are as follows Sudan 1 = 1— [(2,4-dimethylphenyl)azo]-2-naphtalenol Sudan II = l-(phenylazo)-2-naphtol Sudan III = l-(4-phenylazophenylazo)-2-naphtol Sudan IV = o-tolyazo-o-tolyazo-beta-naphtol and Disperse Orange 13 = 4-[4-(phenylazo)-l-naphtylazo]-phenol. Azo dyes were separated in an ODS column (250 x 2.1 mm i.d. particle size 5 /xm) at 35°C. The isocratic mobile phase consisted of 0.1 per cent formic acid in methanol-0.1 per cent formic acid in water (97 3, v/v). The flow rate was 200 /xl/min. MS conditions were nebulizing and desolvation gas were nitrogen at the flow rates of 50 and 5551/h, respectively electrospray voltage, 3.0 kV cone voltage 25 V source temperature, 110°C desolvation temperature, 110°C. Azo dyes were extracted from the samples by homogenizing 1 g of sample with 10 ml of acetone, then the suspension was centrifuged and an aliquot of 3 ml of supernatant was mixed with 1 ml of deionized water, filtered and used for analysis. LC-ESI-MS/Ms SRM traces of standards and spiked samples are listed in Fig. 3.39. It was found that the detection and quantitation limits depended on both the chemical structure of the dye and the character of the accompanying matrix. LOD and LOQ values in chilli tomato sauce...

Like in Chapt. 7, we begin the discussion with acetates, since acetic acid is the simplest nontoxic acyl group, formic acid being less innocuous. An informative study was carried out to compare the kinetics of hydrolysis of two types of corticosteroid esters, namely methyl steroid-21-oates (which are active per se) and acetyl steroid-21-ols (which are prodrugs), as exemplified by methyl prednisolonate (8.69) and prednisolone-21-acetate (8.70), respectively [89]. In the presence of rat liver microsomes, the rate of hydrolytic inactivation of methyl steroid-21-oates was much slower than the rate of hydrolytic activation of acetyl steroid-21-ols. Thus, while the Km values were ca. 0.1 -0.3 mM for all substrates, the acetic acid ester prodrugs and the methyl ester drugs had Vmax values of ca. 20 and 0.15 nmol min-1 mg-1, respectively. It can be postulated that the observed rates of hydrolysis were determined by the acyl moiety, in other words by the liberation of the carboxylic acid from the acyl-enzyme intermediate (see Chapt. 3). 

Organic compounds that have one or two carbon atoms are usually known by their common names. These common names are based on the Latin words formica (ant) and acetum (vinegar). Give the lUPAC names for formaldehyde, formic acid, acetaldehyde, and acetic acid. 

Acrolein is immediately passed through a second oxidation reactor to form acrylic acid. The reaction talces place at 475-575 E, over a tin-antimony oxide catalyst. A few by-products form, namely, formic acid (HCOOH), acetic acid (CH3COOH), low molecular weight polymers, carbon monoxide, and dioxide. But overall yields of propylene to acrylic acid are high—85 to 90%. 

It was first isolated from ants and takes its name from the Latin word for ant, formic a. An ant bite injects a small amount of formic acid into the victim, accounting for the... 

---