Formation nanostructures

Clausen et al. (1991) Cu/ZnO Phase formation, nanostructuring + + + Water gas shift reaction... 

In addition to diamond and amorphous films, nanostructural forms of carbon may also be formed from the vapour phase. Here, stabilisation is achieved by the formation of closed shell structures that obviate the need for surface heteroatoms to stabilise danghng bonds, as is the case for bulk crystals of diamond and graphite. The now-classical example of closed-shell stabilisation of carbon nanostructures is the formation of C o molecules and other Fullerenes by electric arc evaporation of graphite [38] (Section 2.4). 

Fig. 14. SEM images of cuprous oxide nanostructures (A) 100 x, (B) 1,000 x, and (C) Schematic illustration of the dendrite structure formation process.

Streptavidin-single-stranded DNA covalent conjugates were described as the building blocks for assembling nanostructured scaffolds [31], The amount and type of biotinylated ligands were used to modulate the affinity of duplex formation between solid-phase-bound nucleic acid templates and DNA-streptavidin conjugates. This system has been proposed for the design of fine-tuned sequence detection systems. 

The formation of nanostructures such as nanodot arrays has drawn a great attention due to the feasible applications in a variety of functional structures and nanodevices containing optoelectronic device, information storage, and sensing media [1-3]. The various methods such as self-assembled nanodots from solution onto substrate, strain-induced growth, and template-based methods have been proposed for the fabrication of nanodot arrays on a large area, [4-6]. However, most of these works can be applied to the small scale systems due to the limited material systems. 

Knowledge about protein folding and conformation in biological systems can be used to mimic the design of a desired nanostructure conformation from a particular MBB and to predict the ultimate conformation of the nanostructure [152]. Such biomimetic nano-assembly is generally performed step by step. This wiU allow observation of the effect of each new MBB on the nanostructure. As a result, it is possible to control accurate formation of the desired nanostmcture. Biomimetic controlled and directed assembly can be utilized to investigate molecular interactions, molecular modeling, and study of relationships between the composition of MBBs and the final conformation of the nanostmctures. Immobilization of molecules on a surface could facilitate such studies [153]. 

The last problem of this series concerns femtosecond laser ablation from gold nanoparticles [87]. In this process, solid material transforms into a volatile phase initiated by rapid deposition of energy. This ablation is nonthermal in nature. Material ejection is induced by the enhancement of the electric field close to the curved nanoparticle surface. This ablation is achievable for laser excitation powers far below the onset of general catastrophic material deterioration, such as plasma formation or laser-induced explosive boiling. Anisotropy in the ablation pattern was observed. It coincides with a reduction of the surface barrier from water vaporization and particle melting. This effect limits any high-power manipulation of nanostructured surfaces such as surface-enhanced Raman measurements or plasmonics with femtosecond pulses. 

Within the scope of thermoelectric nanostructures, Sima et al. [161] prepared nanorod (fibril) and microtube (tubule) arrays of PbSei. , Tej by potentiostatic electrodeposition from nitric acid solutions of Pb(N03)2, H2Se03, and Te02, using a 30 fim thick polycarbonate track-etch membrane, with pores 100-2,000 nm in diameter, as template (Cu supported). After electrodeposition the polymer membrane was dissolved in CH2CI2. Solid rods were obtained in membranes with small pores, and hollow tubes in those with large pores. The formation of microtubes rather than nanorods in the larger pores was attributed to the higher deposition current. 

Vaidyanathan R, Stickney JL, Cox SM, Compton SP, Happek U (2003) Formation of InaSes thin films and nanostructures using electrochemical atomic layer epitaxy. J Electroanal Chem 559 55-61... 

In this method the creation of defects is achieved by the application of ultrashort (10 ns) voltage pulses to the tip of an electrochemical STM arrangement. The electrochemical cell composed of the tip and the sample within a nanometer distance is small enough that the double layers may be polarized within nanoseconds. On applying positive pulses to the tip, the electrochemical oxidation reaction of the surface is driven far from equilibrium. This leads to local confinement of the reactions and to the formation of nanostructures. For every pufse applied, just one hole is created directly under the tip. This overcomes the restrictions of conventional electrochemistry (without the ultrashort pulses), where the formation of nanostructures is not possible. The holes generated in this way can then be filled with a metal such as Cu by... 

The second procedure is different from the previous one in several aspects. First, the metallic substrate employed is Au, which does not show a remarkable dissolution under the experimental conditions chosen, so that no faradaic processes are involved at either the substrate or the tip. Second, the tip is polarized negatively with respect to the surface. Third, the potential bias between the tip and the substrate must be extremely small (e.g., -2 mV) otherwise, no nanocavity formation is observed. Fourth, the potential of the substrate must be in a region where reconstruction of the Au(lll) surface occurs. Thus, when the bias potential is stepped from a significant positive value (typically, 200 mV) to a small negative value and kept there for a period of several seconds, individual pits of about 40 nm result, with a depth of two to four atomic layers. According to the authors, this nanostructuring procedure is initiated by an important electronic (but not mechanical) contact between tip and substrate. As a consequence of this interaction, and stimulated by an enhanced local reconstruction of the surface, some Au atoms are mobilized from the Au surface to the tip, where they are adhered. When the tip is pulled out of the surface, a pit with a mound beside it is left on the surface. The formation of the connecting neck between the tip and surface is similar to the TILMD technique described above but with a different hnal result a hole instead of a cluster on the surface (Chi et al., 2000). 

Maruyama, N., Koito, T, Sawadaishi, T, Karthaus, O., Ijiro, K., Nishi, N., Tokura, S., Nishimura, S. and Shimomura, M. (1998) Mesoscopic pattern formation of nanostructured polymer assemblies. Supramol. Sci., 5, 331-336. 

The formation of nanopattemed functional surfaces is a recent topic in nanotechnology. As is widely known, diblock copolymers, which consist of two different types of polymer chains cormected by a chemical bond, have a wide variety of microphase separation structures, such as spheres, cylinders, and lamellae, on the nanoscale, and are expected to be new functional materials with nanostructures. Further modification of the nanostructures is also useful for obtaining new functional materials. In addition, utilization of nanopartides of an organic dye is also a topic of interest in nanotechnology. 

Electrochemical oscillation during the Cu-Sn alloy electrodeposition reaction was first reported by Survila et al. [33]. They found the oscillation in the course of studies of the electrochemical formation of Cu-Sn alloy from an acidic solution containing a hydrosoluble polymer (Laprol 2402C) as a brightening agent, though the mechanism of the oscillatory instability was not studied. We also studied the oscillation system and revealed that a layered nanostructure is formed in synchronization with the oscillation in a self-organizational manner [25, 26]. 

We have reviewed studies of the self-organized formation of ordered nanostructures by oscillatory electrodeposition. Although the mechanism is totally different in different cases and the structures of the resultant deposits vary greatly, they agree in that a unit structure is formed with one cycle of the oscillation. Periodic ordered... 

---