Ethylene propylene plastic

It resembles polytetrafiuoroethylene and fiuorinated ethylene propylene in its chemical resistance, electrical properties, and coefficient of friction. Its strength, hardness, and wear resistance are about equal to the former plastic and superior to that of the latter at temperatures above 150°C. 

FEP in pLUORINE COMPOUNDS, ORGANIC - PERFLUORINATED ETHYLENE-PROPYLENE COPOLYTffiRS] (Vol 11) -of plastic foams pOAMED PLASTICS] (Vol 11)... 

Many cellular plastics that have not reached significant commercial use have been introduced or their manufacture described in Hterature. Examples of such polymers are chlorinated or chlorosulfonated polyethylene, a copolymer of vinyUdene fluoride and hexafluoropropylene, polyamides (4), polytetrafluoroethylene (5), styrene—acrylonitrile copolymers (6,7), polyimides (8), and ethylene—propylene copolymers (9). 

Similarly, the random introduction by copolymerization of stericaHy incompatible repeating unit B into chains of crystalline A reduces the crystalline melting point and degree of crystallinity. If is reduced to T, crystals cannot form. Isotactic polypropylene and linear polyethylene homopolymers are each highly crystalline plastics. However, a random 65% ethylene—35% propylene copolymer of the two, poly(ethylene- (9-prop5lene) is a completely amorphous ethylene—propylene mbber (EPR). On the other hand, block copolymers of the two, poly(ethylene- -prop5iene) of the same overall composition, are highly crystalline. X-ray studies of these materials reveal both the polyethylene lattice and the isotactic polypropylene lattice, as the different blocks crystallize in thek own lattices. 

The use of TAG as a curing agent continues to grow for polyolefins and olefin copolymer plastics and mbbers. Examples include polyethylene (109), chlorosulfonated polyethylene (110), polypropylene (111), ethylene—vinyl acetate (112), ethylene—propylene copolymer (113), acrylonitrile copolymers (114), and methylstyrene polymers (115). In ethylene—propylene copolymer mbber compositions. TAG has been used for injection molding of fenders (116). Unsaturated elastomers, such as EPDM, cross link with TAG by hydrogen abstraction and addition to double bonds in the presence of peroxyketal catalysts (117) (see Elastol rs, synthetic). 

None of the polymers from unbranched olefins, other than ethylene, propylene or but-1-ene, has yet become important as a plastics material although some of them are of interest both as adhesives and release agents. One limitation of a... 

Elastomers, plastics, fabrics, wood and metals can be joined with themselves and with each other using nitrile rubber/epoxy resin blends cured with amines and/or acidic agents. Ethylene-propylene vulcanizates can also be joined using blends of carboxylated nitrile rubber, epoxy resin and a reactive metal filler (copper, nickel, cobalt). However, one of the largest areas of use of nitrile rubber modified epoxy systems is in the printed circuit board area [12]. 

Fluorinated polymers stand out sharply against other construction materials for their excellent corrosion resistance and high-temperature stability. In this respect they are not only superior to other plastics but also to platinum, gold, glass, enamel and special alloys. The fluorinated plastics used in process plants are polytetrafluorethylene (PTFE), fluorinated ethylene/ propylene (FEP), polytrifiuoromonochlorethylene (PTFCE) and polyvinyl fluoride (PVF). They are much more expensive than other polymers and so are only economical in special situations [59]. 

Polytetrafluoroethylene and fluorinated ethylene-propylene are the only resins composed wholly of fluorine and carbon. The polymer consists of fluorine atoms surrounding the carbon chain as a sheath, giving a chemically inert and relatively dense product from the strong carbon-fluorine bonds. Polytetrafluoroethylene must be molded at high pressure. Fluorinated ethylene-propylene c.m be injection molded and extruded as thin fdm. Both plastics have exceptional heat resistance... 

TPEs from blends of rubber and plastics constitute an important category of TPEs. These can be prepared either by the melt mixing of plastics and rubbers in an internal mixer or by solvent casting from a suitable solvent. The commonly used plastics and rubbers include polypropylene (PP), polyethylene (PE), polystyrene (PS), nylon, ethylene propylene diene monomer rubber (EPDM), natural rubber (NR), butyl rubber, nitrile rubber, etc. TPEs from blends of rubbers and plastics have certain typical advantages over the other TPEs. In this case, the required properties can easily be achieved by the proper selection of rubbers and plastics and by the proper change in their ratios. The overall performance of the resultant TPEs can be improved by changing the phase structure and crystallinity of plastics and also by the proper incorporation of suitable fillers, crosslinkers, and interfacial agents. 

Plastics are susceptible to brittle crack-growth fractures as a result of cyclic stresses in much the same way as metals. In addition, because of their high damping and low thermal conductivity, plastics are prone to thermal softening if the cyclic stress or cyclic rate is high. Examples of the TPs with the best fatigue resistance include PP and ethylene-propylene copolymers. 

Proper selection of plastic matrix fire retardants and property enhancers offers acceptable combinations of impact properties and heat-distortion temperature (HDT) values for fire retardant plastics. This can be demonstrated by fire retardant styrenics. Fire retardant enhancers have special interest as property enhancers for example the addition of a highly flammable material such as ethylene propylene diene terpolyer (EPDM), dramatically improves the bromine efficiency of octabromodiphenyl oxide in ABS by increasing char-forming without changing the Sb-Br reaction. 

Fluorinated ethylene propylene (Teflon) (FEP) is a fully fluori-nated plastic. This polymer was developed to have a combination of unique properties. It combines the desirable properties of PTFE with advantageous melt processing properties. 

EPDM Ethylene-propylene-diene rubber, MPW Mixed plastic waste... 

The isoprene units in the copolymer impart the ability to crosslink the product. Polystyrene is far too rigid to be used as an elastomer but styrene copolymers with 1,3-butadiene (SBR rubber) are quite flexible and rubbery. Polyethylene is a crystalline plastic while ethylene-propylene copolymers and terpolymers of ethylene, propylene and diene (e.g., dicyclopentadiene, hexa-1,4-diene, 2-ethylidenenorborn-5-ene) are elastomers (EPR and EPDM rubbers). Nitrile or NBR rubber is a copolymer of acrylonitrile and 1,3-butadiene. Vinylidene fluoride-chlorotrifluoroethylene and olefin-acrylic ester copolymers and 1,3-butadiene-styrene-vinyl pyridine terpolymer are examples of specialty elastomers. 

---