Epoxides metalation

The chemistry of metalated aziridines is far less developed than the chemistry of metalated epoxides, although from what is known [lb], it is obvious that their chemistry is similar. Like metalated epoxides, metalated aziridines can act as classical nucleophiles with a variety of electrophiles to give more highly substituted aziridines (Scheme 5.56, Path A). A small amount is known about how they can act as electrophiles with strong nucleophiles to undergo reductive alkylation (Path B), and undergo C-H insertion reactions (Path C). 

Arene oxides show the characteristic reactions of epoxides (isomerization to ketones, reductions to alcohols, nucleophilic additions, deoxygenations) and olefins or conjugated dienes (catalytic hydrogenation, photochemical isomerization, cycloaddition, epoxidation, metal complexation). Where a spontaneous, rapid equilibration between the arene oxide and oxepin forms exists, reactivity typical of a conjugated triene is also found. 

LITHIUM NITRIDE (26134-62-3) Dust or powder ignites spontaneously in moist air. Contact with water or steam forms lithium hydroxide and ammonia. A strong reducing agent. Violent reaction with many materials, including oxidizers, carbon tetrachloride, 2,4-dinitrophenol, epoxides, metal salts, silicon tetrafluoride. Incompatible with copper chloride. In case of fire, use approved Class D extinguishers or smothering quantities of dry sand, crushed limestone, clay. 

Optically active epoxides are found in many natural products [213] and are highly versatile intermediates and building blocks. Asymmetric epoxidations of double bonds have long been employed using metal-mediated methods such as the Sharpless [214] and Jacobsen-Katsuki [215, 216] epoxidation. Metal-free asymmetric epoxidations are mostly mediated by chiral dioxiranes and oxaziridines. Dioxiranes or their respective precursor ketones represent some of the oldest and most versatile organocatalysts for the asymmetric epoxidation of olefins. They are particularly useful for unfunctionalized trans-, disubstituted, trisubstituted and terminal olefins [217-224]. 

Regioselectivity of C—C double bond formation can also be achieved in the reductiv or oxidative elimination of two functional groups from adjacent carbon atoms. Well estab llshed methods in synthesis include the reductive cleavage of cyclic thionocarbonates derivec from glycols (E.J. Corey, 1968 C W. Hartmann, 1972), the reduction of epoxides with Zn/Nal or of dihalides with metals, organometallic compounds, or Nal/acetone (seep.lS6f), and the oxidative decarboxylation of 1,2-dicarboxylic acids (C.A. Grob, 1958 S. Masamune, 1966 R.A. Sheldon, 1972) or their r-butyl peresters (E.N. Cain, 1969). 

The 2-metalated thiazoles react with a variety of electrophilic substrates in a standard way, leading to addition products with aldehydes, ketones, carbon dioxide, epoxides, nitriles, Schiff bases, and to substitution products with alkyl iodides (12, 13, 437, 440). 

These monomers provide a means for introducing carboxyl groups into copolymers. In copolymers these acids can improve adhesion properties, improve freeze-thaw and mechanical stability of polymer dispersions, provide stability in alkalies (including ammonia), increase resistance to attack by oils, and provide reactive centers for cross-linking by divalent metal ions, diamines, or epoxides. 

Displacement of activated chlorine atoms also proceeds with certain types of organic compounds, but only in the presence of Lewis acid catalysts. Particular examples include epoxides, polyhydric alcohols, trialkylphosphites (12), and P-aminocrotonates (13). These additives are commonly used in conjunction with metallic stabilizers to provide complete, high performance, commercial stabilizer packages. 

Typically, soHd stabilizers utilize natural saturated fatty acid ligands with chain lengths of Cg—C g. Ziac stearate [557-05-1/, ziac neodecanoate [27253-29-8] calcium stearate [1592-23-0] barium stearate [6865-35-6] and cadmium laurate [2605-44-9] are some examples. To complete the package, the soHd products also contain other soHd additives such as polyols, antioxidants, and lubricants. Liquid stabilizers can make use of metal soaps of oleic acid, tall oil acids, 2-ethyl-hexanoic acid, octylphenol, and nonylphenol. Barium bis(nonylphenate) [41157-58-8] ziac 2-ethyIhexanoate [136-53-8], cadmium 2-ethyIhexanoate [2420-98-6], and overbased barium tallate [68855-79-8] are normally used ia the Hquid formulations along with solubilizers such as plasticizers, phosphites, and/or epoxidized oils. The majority of the Hquid barium—cadmium formulations rely on barium nonylphenate as the source of that metal. There are even some mixed metal stabilizers suppHed as pastes. The U.S. FDA approved calcium—zinc stabilizers are good examples because they contain a mixture of calcium stearate and ziac stearate suspended ia epoxidized soya oil. Table 4 shows examples of typical mixed metal stabilizers. 

Epo>y Compounds. Epoxidized soya oil (ESO) is the most widely used epoxy-type additive and is found ia most mixed metal stabilized PVC formulations at 1.0—3.0 phr due to its versatiHty and cost effectiveness. Other usefiil epoxy compounds are epoxidized glycerol monooleate, epoxidized linseed oil, and alkyl esters of epoxidized tall oil fatty acid. 

Obsolete uses of urea peroxohydrate, as a convenient source of aqueous hydrogen peroxide, include the chemical deburring of metals, as a topical disinfectant and mouth wash, and as a hairdresser s bleach. In the 1990s the compound has been studied as a laboratory oxidant in organic chemistry (99,100). It effects epoxidation, the Baeyer-Villiger reaction, oxidation of aromatic amines to nitro compounds, and the conversion of sodium and nitrogen compounds to S—O and N—O compounds. 

With certain transition metals, eg, Ru(II)-tertiary phosphine complexes, the principal products are bis(epoxides) (82). 

Often the requisite THF oxonium ion is generated m situ by using a combination of reagents based on the Meerwein syntheses of trialkyl oxonium salts (150). These combinations include epichlorohydrin or a reactive haUde with a Lewis acid, a reactive hahde with a metal salt, or sometimes just a Lewis acid alone. The epoxide portion is often referred to as a promoter. 

This chemical bond between the metal and the hydroxyl group of ahyl alcohol has an important effect on stereoselectivity. Asymmetric epoxidation is weU-known. The most stereoselective catalyst is Ti(OR) which is one of the early transition metal compounds and has no 0x0 group (28). Epoxidation of isopropylvinylcarbinol [4798-45-2] (1-isopropylaHyl alcohol) using a combined chiral catalyst of Ti(OR)4 and L-(+)-diethyl tartrate and (CH2)3COOH as the oxidant, stops at 50% conversion, and the erythro threo ratio of the product is 97 3. The reason for the reaction stopping at 50% conversion is that only one enantiomer can react and the unreacted enantiomer is recovered in optically pure form (28). 

Diarylamines do not react with carbon disulfide, whereas dialkylamines readily form dithiocarbamates. However, N,Ar-diaryldithiocarbamates can be prepared from metal salts of diarylamines and carbon disulfide (15). They are more stable than diaLkyldithiocarbarnic acids, eg, N,N -diphenyldithiocarbamic acid [7283-79-6] mp 142°C. Similarly, various metal salts of DPA react with carbon dioxide and an epoxide to give the P-hydroxyalkyldiphenylcarbamates (16). 

The tert-huty hydroperoxide is then mixed with a catalyst solution to react with propylene. Some TBHP decomposes to TBA during this process step. The catalyst is typically an organometaHic that is soluble in the reaction mixture. The metal can be tungsten, vanadium, or molybdenum. Molybdenum complexes with naphthenates or carboxylates provide the best combination of selectivity and reactivity. Catalyst concentrations of 200—500 ppm in a solution of 55% TBHP and 45% TBA are typically used when water content is less than 0.5 wt %. The homogeneous metal catalyst must be removed from solution for disposal or recycle (137,157). Although heterogeneous catalysts can be employed, elution of some of the metal, particularly molybdenum, from the support surface occurs (158). References 159 and 160 discuss possible mechanisms for the catalytic epoxidation of olefins by hydroperoxides. 

After epoxidation a distillation is performed to remove the propylene, propylene oxide, and a portion of the TBHP and TBA overhead. The bottoms of the distillation contains TBA, TBHP, some impurities such as formic and acetic acid, and the catalyst residue. Concentration of this catalyst residue for recycle or disposal is accompHshed by evaporation of the majority of the TBA and other organics (141,143,144), addition of various compounds to yield a metal precipitate that is filtered from the organics (145—148), or Hquid extraction with water (149). Low (<500 ppm) levels of soluble catalyst can be removed by adsorption on soHd magnesium siUcate (150). The recovered catalyst can be treated for recycle to the epoxidation reaction (151). 

Although this process has not been commercialized, Daicel operated a 12,000-t/yr propylene oxide plant based on a peracetic acid [79-21-0] process during the 1970s. The Daicel process involved metal ion-catalyzed air oxidation of acetaldehyde in ethyl acetate solvent resulting in a 30% peracetic acid solution in ethyl acetate. Epoxidation of propylene followed by purification gives propylene oxide and acetic acid as products (197). As of this writing (ca 1995), this process is not in operation. 

---