Emission spectroscopy. Inductively coupled

Keywords Trace elements Radionuclides Environment Water Soil Aerosol Plant Neutron activation analysis Atomic absorption spectrometry Inductively coupled plasma-atomic emission spectroscopy Inductively coupled plasma-mass spectrometry X-ray fluorescence Electrochemical methods Speciation... 

Houk, R. S. (2000). Atomic emission spectroscopy—Inductively coupled plasma-mass spectrometry and the European discovery of America./. Chem. Educ. 77(5), 598. 

Quantitative aluminum deterrninations in aluminum and aluminum base alloys is rarely done. The aluminum content is generally inferred as the balance after determining alloying additions and tramp elements. When aluminum is present as an alloying component in alternative alloy systems it is commonly deterrnined by some form of spectroscopy (qv) spark source emission, x-ray fluorescence, plasma emission (both inductively coupled and d-c plasmas), or atomic absorption using a nitrous oxide acetylene flame. 

Numerous methods have been pubUshed for the determination of trace amounts of tellurium (33—42). Instmmental analytical methods (qv) used to determine trace amounts of tellurium include atomic absorption spectrometry, flame, graphite furnace, and hydride generation inductively coupled argon plasma optical emission spectrometry inductively coupled plasma mass spectrometry neutron activation analysis and spectrophotometry (see Mass spectrometry Spectroscopy, optical). Other instmmental methods include polarography, potentiometry, emission spectroscopy, x-ray diffraction, and x-ray fluorescence. 

Graphite furnace AAS Atomic fluorescence spectroscopy Inductively-coupled-plasma optical-emission spectroscopy Glow-discharge optical-emission spectroscopy Laser-excited resonance ionization spectroscopy Laser-excited atomic-fluorescence spectroscopy Laser-induced-breakdown spectroscopy Laser-induced photocoustic spectroscopy Resonance-ionization spectroscopy... 

Bulk chemical analysis X-ray fluorescence spectroscopy Atomic absorption spectroscopy Inductively coupled plasma emission spectroscopy Direct-current plasma emission spectroscopy Arc emission spectroscopy Gravimetry Combustion Kjeldahl Impurities... 

See also Activation Analysis Neutron Activation. Atomic Emission Spectrometry Inductively Coupled Plasma. Atomic Mass Spectrometry Inductively Coupled Plasma. Chemometrics and Statistics Expert Systems. Glasses. Microscopy Applications Forensic. Optical Spectroscopy Refractometry and Reflectometry. X-Ray Fluorescence and Emission Energy Dispersive X-Ray Fluorescence. 

X-ray spectroscopy Finally, X-ray fluorescence can be used to determine the elemental profile of inks and papers. Some techniques based on X-ray properties (particle-induced X-ray emission and inductively coupled plasma atomic emission spectroscopy) have been applied to writing inks. Nevertheless, it was found that there were not enough variation between the different particles, present in ink formula, to help distinguish from each other. 

Luminescence molecular detectors have also been used for online monitoring of dissolution tests and the characterization of toxic residues using bioluminescence assays. Atomic (atomic absorption spectroscopy, inductively coupled plasma-atomic emission spectroscopy (ICP-AES)) detectors have been coupled to robotic stations either through a continuous system acting as interface or by direct aspiration into an instrument from a sample vial following treatment by the robot. Mass spectrometric and nuclear magnetic resonance (NMR) detectors... 

See also Atomic Absorption Spectrometry Principles and Instrumentation. Atomic Emission Spectrometry Inductively Coupled Plasma. Cosmetics and Toiletries. Derivatization of Analytes. Electrophoresis Is-otachophoresls. Environmental Analysis. Enzymes Overview. Extraction Supercritical Fluid Extraction Solid-Phase Extraction Solid-Phase Microextraction. Ion Exchange Ion Chromatography Applications. Liquid Chromatography Reversed Phase Liquid Chromatography-Mass Spectrometry. Nuclear Magnetic Resonance Spectroscopy - Applicable Elements Carbon-13 Phosphorus-31. Perfumes. 

See also Atomic Absorption, Methods and Instrumentation Atomic Absorption, Theory Atomic Emission, Methods and Instrumentation Atomic Spectroscopy, Historical Perspective Calibration and Reference Systems (Regulatory Authorities) Environmental Applications of Electronic Spectroscopy Food Dairy Products, Applications of Atomic Spectroscopy Food Science, Applications of Mass Spectrometry Food Science, Applications of NMR Spectroscopy Inductively Coupled Plasma Mass Spectrometry, Methods X-Ray Fluorescence Spectrometers X-Ray Fluorescence Spectroscopy, Applications. 

The section on Spectroscopy has been retained but with some revisions and expansion. The section includes ultraviolet-visible spectroscopy, fluorescence, infrared and Raman spectroscopy, and X-ray spectrometry. Detection limits are listed for the elements when using flame emission, flame atomic absorption, electrothermal atomic absorption, argon induction coupled plasma, and flame atomic fluorescence. Nuclear magnetic resonance embraces tables for the nuclear properties of the elements, proton chemical shifts and coupling constants, and similar material for carbon-13, boron-11, nitrogen-15, fluorine-19, silicon-19, and phosphoms-31. 

Because light emitted from inductively coupled plasma torches is characteristic of the elements present, the torches were originally introduced for instruments that optically measured the frequencies and intensities of the emitted light and used them, rather than ions, to estimate the amounts and types of elements present (inductively coupled plasma atomic emission spectroscopy. 

To examine a sample by inductively coupled plasma mass spectrometry (ICP/MS) or inductively coupled plasma atomic-emission spectroscopy (ICP/AES) the sample must be transported into the flame of a plasma torch. Once in the flame, sample molecules are literally ripped apart to form ions of their constituent elements. These fragmentation and ionization processes are described in Chapters 6 and 14. To introduce samples into the center of the (plasma) flame, they must be transported there as gases, as finely dispersed droplets of a solution, or as fine particulate matter. The various methods of sample introduction are described here in three parts — A, B, and C Chapters 15, 16, and 17 — to cover gases, solutions (liquids), and solids. Some types of sample inlets are multipurpose and can be used with gases and liquids or with liquids and solids, but others have been designed specifically for only one kind of analysis. However, the principles governing the operation of inlet systems fall into a small number of categories. This chapter discusses specifically substances that are normally liquids at ambient temperatures. This sort of inlet is the commonest in analytical work. 

ICP/AES. inductively coupled plasma and atomic-emission spectroscopy used as a combined technique... 

Inductively coupled plasma atomic emission spectroscopy... 

Emission spectroscopy is a very useful analytical technique in determining the elemental composition of a sample. The emission may be produced in an electrical arc or spark but, since the mid-1960s, an inductively coupled plasma has increasingly been used. 

For inductively coupled plasma atomic emission spectroscopy (ICP-AES) the sample is normally in solution but may be a fine particulate solid or even a gas. If it is a solution, this is nebulized, resulting in a fine spray or aerosol, in flowing argon gas. The aerosol is introduced into a plasma torch, illustrated in Figure 3.21. 

Figure 3.21 A plasma torch for inductively coupled plasma atomic emission spectroscopy...

Oxygen and nitrogen also are deterrnined by conductivity or chromatographic techniques following a hot vacuum extraction or inert-gas fusion of hafnium with a noble metal (25,26). Nitrogen also may be deterrnined by the Kjeldahl technique (19). Phosphoms is determined by phosphine evolution and flame-emission detection. Chloride is determined indirecdy by atomic absorption or x-ray spectroscopy, or at higher levels by a selective-ion electrode. Fluoride can be determined similarly (27,28). Uranium and U-235 have been determined by inductively coupled plasma mass spectroscopy (29). 

Small concentrations of iron can also be deterrnined by flame atomic absorption and inductively coupled plasma emission spectroscopies (see... 

---