Emergency personal protective equipment

Personal Protective Equipment. Personal protective and emergency safety equipment should not be reHed on as the primary protection from aHyl chloride. Prevention of exposure should be considered the preferred precautionary measure. Where the exposure guideline may be gready exceeded, an approved positive-pressure air suppHed or self-contained breathing apparatus with fuH facepiece should be used (51). 

Emergency response On-site communications Emergency shutdown equipment and procedures Site evacuation Safe havens Personal protective equipment Medical treatment On-site emergency plans, procedures, training, aud drills... 

Use personal protective equipment Provide sufficient bottled air/SCBA Develop emergency response procedures Develop appropriate evacuation plans... 

Ensure CTU doors are properly secured Learn emergency procedures Ensure availability of appropriate personal protective equipment as advised in transport documentation, and suitable fire extinguisher Check sides and ends of CTU are placarded appropriately... 

What precautions (e.g., domiing personal protective equipment) are to be taken when responding to an emergency ... 

Adequate personal protective equipment available for handling and use of material specified Antidotes/emergency facilities available ... 

Employers must ensure that their workers know the potential hazards of the chemicals they work with, how to protect themselves against those hazards (e.g., safe practices, personal protection equipment, etc.), and what to do in case of an emergency. Accordingly, OSHA has established basic communication requirements under the Hazard Communication Standard to inform workers about chemicals in use in the workplace. Under this standard, chemical makers must meet the following requirements ... 

Occupational Safety and Health Administration, National Institute for Occupational Safety and Health. Interim Guidance on Personal Protective Equipment Selection for Emergency Responders Nerve Agents, August 30, 2004 (http //www.osha.gov/SLTC/... 

Hold a briefing for entry personnel and support crew. Ensure that all staff on scene understand emergency signals, preplanned escape routes, locations of Hot/Warm/ Cold zones, operational hazards at this site, the evacuation system, the buddy system, the need for appropriate personal protective equipment (PPE) the potential need to decontaminate rescuers and their equipment, and contaminated persons location of rehabilitation area, possible air space closure over incident site, etc. 

Field First Aid Remove victim(s) to an area of safety (away from the Hot Zone). Remember patients may contaminate you and/or other emergency responders if you fail to don proper personal protective equipment. Provide victims with emergency medical care as soon as possible. Unless otherwise recommended, remove victim(s) clothing, shoes, and personnel belongings for later return. If the victim was obviously in contact with infectious substance(s), flush skin and eyes for fifteen to twenty minutes. Route victim(s) to hospital for a physician s professional opinion. Ensure that hospital staff is fully aware of the medical situation and the poison or infectious substance that may be involved. An enzyme-linked immunosorbent assay test (ELISA) is now approved for anthrax use in hospital laboratories. 

Any procedures they may need to follow to respond to or otherwise protect themselves in response to an emergency such training should include the use of any personal protective equipment, special tools, or equipment required for these actions. 

For this reason, NCRP recommends that emergency response personnel and first response vehicles should be equipped with radiation detection equipment to alert them for a radiologically compromised environment. Furthermore, this equipment should be designed to alert the responders when unacceptable ambient dose rates or dose limits are reached. Responders should wear appropriate personal protective equipment (e.g., chemical safety suits, respirators). 

When an explosive device is used to disperse radioactive, chemical, or biological materials, the treatment of casualties is more difficult because of the presence of contamination. In this situation, emergency responders could face a life-threatening situation unless appropriate precautions are taken. These precautions include using screening instruments (see Section 6.12) to assess hazard conditions before responding, then selecting the appropriate level of personal protective equipment (see Section 6.7) to provide protection from the hazard. 

This should provide direction as to how operations staff, emergency responders, and the public should respond to a potential toxic release (e.g., chemical plumes released), including facility evacuation, personnel accountability, proper personal protective equipment (PPE) as dictated by the Risk Management Program and Process Safety Management Plan, and whether the nearby public should be in-place sheltered or evacuated. 

Personal protective equipment (PPE) is the term used for a variety of physical devices used to protect the body from hazards. Industrial hazards include impact, excess noise, heat, cold, and noxious chemicals of many different kinds and actions. The type of PPE we are concerned with here, of course, is equipment that can provide protection against hazardous chemicals. Protection may be required specifically for the face and eyes, skin, and the respiratory system, and each may need a different kind of safeguard. However, as previously stated, except in emergencies and special circumstances, PPE should not be relied on as the primary or sole approach to protection. Primary attack at the source by administrative and engineering means must always be considered paramount. 

A written safety program that includes the following topics new employee safety orientation, safety training, hazard communication, emergency action plan, fall protection, scaffolding, heat stress, personal protective equipment, electrical, first aid, and bloodborne pathogens. 

If trained to do so and confident that you are capable, activate any fire monitors and/or fixed fire water systems in the immediate area and attempt to cool the tank and surrounding equipment. If the tank is receiving material or product, close a valve on the inlet line at a safe location. Stand by to direct the Emergency Response Team (ERT) to scene Use appropriate Personal Protective Equipment (PPE) First Responder... 

The Safety Data Sheet contains information, such as the identity of the dye, possible hazardous components and physicochemical, toxicological, and ecological data, first aid and emergency measures, occupational exposure limits, and information on personal protective equipment [45],... 

In all aspects of site investigations, health and safety considerations should take priority. Staff should be suitably trained and adequately supervised. Particular care should be taken with monitoring locations that pose particular difficulties for access or that are unsafe in any other way. Risk assessments should be prepared in advance and reviewed at regular intervals. Suitable personal protective equipment and emergency equipment and protocols should be available. 

---