Electrolytes proton-exchange membrane

The only deviation from this pattern is the DMFC (direct methanol fuel cell) which uses methanol as a fuel without intermediate reforming and microbial fuel cells that use sugar as a fuel and derive current from the metabolic activity of yeast. Both types use a solid ion exchange membrane type electrolyte (proton exchange membrane). 

Fig. 14.2 Main transport processes in a polymer electrolyte (proton exchange) membrane fuel...

The electrons are drawn to an external circuit through conductive backing layers to generate electricity, and the protons migrate through a humidified solid electrolyte (proton exchange membrane, PEM) and react with oxygen at the cathode ... 

Abstract This review is intended to provide the recent status in the development of polymeric-electrolyte (proton-exchange) membranes for the improvement of fuel cell performance based primarily on the preceding chapters of this book. Special attention is paid to the modification of present membranes, recent novel strategies for preparation of membranes, conceptual design of new membrane materials, and also promising approaches to overcome issues that severely restrict commercialization. The critical role of the materials and membranes and also relevant infrastructure of electrode is addressed. The new possibihties to improve technologies for implementation, and future trends are briefly examined. 

The most promising fuel cell for transportation purposes was initially developed in the 1960s and is called the proton-exchange membrane fuel cell (PEMFC). Compared with the PAFC, it has much greater power density state-of-the-art PEMFC stacks can produce in excess of 1 kWA. It is also potentially less expensive and, because it uses a thin solid polymer electrolyte sheet, it has relatively few sealing and corrosion issues and no problems associated tvith electrolyte dilution by the product water. 

As with batteries, differences in electrolytes create several types of fuel cells. The automobile s demanding requirements for compactness and fast start-up have led to the Proton Exchange Membrane (PEM) fuel cell being the preferred type. This fuel cell has an electrolyte made of a solid polymer. 

The electrocatalytic oxidation of methanol has been widely investigated for exploitation in the so-called direct methanol fuel cell (DMFC). The most likely type of DMFC to be commercialized in the near future seems to be the polymer electrolyte membrane DMFC using proton exchange membrane, a special form of low-temperature fuel cell based on PEM technology. In this cell, methanol (a liquid fuel available at low cost, easily handled, stored, and transported) is dissolved in an acid electrolyte and burned directly by air to carbon dioxide. The prominence of the DMFCs with respect to safety, simple device fabrication, and low cost has rendered them promising candidates for applications ranging from portable power sources to secondary cells for prospective electric vehicles. Notwithstanding, DMFCs were... 

Membrane-type fuel cells. The electrolyte is a polymeric ion-exchange membrane the working temperatures are 60 to 100°C. Such systems were first used in Gemini spaceships. These fuel cells subsequently saw a rather broad development and are known as (solid) polymer electrolyte or proton-exchange membrane fuel cells (PEMFCs). 

Ambient temperature catalysis of O2 reduction at low overpotentials is a challenge in development of conventional proton exchange membrane fuel cells (pol5mer electrolyte membrane fuel cells, PEMFCs) [Ralph and Hogarth, 2002]. In this chapter, we discuss two classes of enz5mes that catalyze the complete reduction of O2 to H2O multi-copper oxidases and heme iron-containing quinol oxidases. 

Proton Exchange Membrane Fuel Cells (PEMFCs) are being considered as a potential alternative energy conversion device for mobile power applications. Since the electrolyte of a PEM fuel cell can function at low temperatures (typically at 80 °C), PEMFCs are unique from the other commercially viable types of fuel cells. Moreover, the electrolyte membrane and other cell components can be manufactured very thin, allowing for high power production to be achieved within a small volume of space. Thus, the combination of small size and fast start-up makes PEMFCs an excellent candidate for use in mobile power applications, such as laptop computers, cell phones, and automobiles. 

This survey focuses on recent developments in catalysts for phosphoric acid fuel cells (PAFC), proton-exchange membrane fuel cells (PEMFC), and the direct methanol fuel cell (DMFC). In PAFC, operating at 160-220°C, orthophosphoric acid is used as the electrolyte, the anode catalyst is Pt and the cathode can be a bimetallic system like Pt/Cr/Co. For this purpose, a bimetallic colloidal precursor of the composition Pt50Co30Cr20 (size 3.8 nm) was prepared by the co-reduction of the corresponding metal salts [184-186], From XRD analysis, the bimetallic particles were found alloyed in an ordered fct-structure. The elecbocatalytic performance in a standard half-cell was compared with an industrial standard catalyst (bimetallic crystallites of 5.7 nm size) manufactured by co-precipitation and subsequent annealing to 900°C. The advantage of the bimetallic colloid catalysts lies in its improved durability, which is essential for PAFC applicabons. After 22 h it was found that the potential had decayed by less than 10 mV [187],... 

Most automotive fuel cells use a thin, fluorocarbon-based polymer to separate the electrodes. This is the proton exchange membrane (PEM) that gives this type of fuel cell its name. The polymer provides the electrolyte for charge transport as well as the physical barrier to block the mixing... 

PEM Proton-exchange-membrane fuel cell (Polymer-electrolyte-membrane fuel cell) Proton- conducting polymer membrane (e.g., Nafion ) H+ (proton) 50-80 mW (Laptop) 50 kW (Ballard) modular up to 200 kW 25-=45% Immediate Road vehicles, stationary electricity generation, heat and electricity co-generation, submarines, space travel... 

PAFC PEMFC PFC PGM PHEV PISI PM POX ppm PPP Phosphoric-acid fuel cell Proton-exchange-membrane fuel cell Polymer-electrolyte membrane Perfluorocarbons Platinum-group metals Plug-in hybrid-electric vehicle Port-injection spark ignition Particulate matter Partial oxidation Parts per million Purchasing power parity... 

The PEMFC (Proton Exchange Membrane Fuel Cell) is a fuel cell with a protonconducting fluorinated polymer as electrolyte. Figure 14.12 gives a schematic drawing of the PEMFC. At the anode, hydrogen is oxidized to protons. At the cathode, oxygen from air is reduced to water. The PEMFC is in development for various applications. 

Buchi, F. N., Gupta, B., Haas, O. and Scherer, G. G. 1995. Performance of differently cross-linked, partially fluorinated proton-exchange membranes in polymer electrolyte fuel cells. Journal of the Electrochemical Society 142 3044—3048. 

Figure 4.1 shows a schematic of a typical polymer electrolyte membrane fuel cell (PEMFC). A typical membrane electrode assembly (MEA) consists of a proton exchange membrane that is in contact with a cathode catalyst layer (CL) on one side and an anode CL on the other side they are sandwiched together between two diffusion layers (DLs). These layers are usually treated (coated) with a hydrophobic agent such as polytetrafluoroethylene (PTFE) in order to improve the water removal within the DL and the fuel cell. It is also common to have a catalyst-backing layer or microporous layer (MPL) between the CL and DL. Usually, bipolar plates with flow field (FF) channels are located on each side of the MFA in order to transport reactants to the... 

Because of its lower temperature and special polymer electrolyte membrane, the proton exchange membrane fuel cell (PEMFC) is well-suited for transportation, portable, and micro fuel cell applications. But the performance of these fuel cells critically depends on the materials used for the various cell components. Durability, water management, and reducing catalyst poisoning are important factors when selecting PEMFC materials. 

Various types of fuel cells have been developed to generate power according to the applications and load requirements (Chaurasia, 2000). There are several types of electrolyte, which plays a key role in the different types of fuel cells. It must permit only the appropriate ions to pass between the anode and cathode. The main electrolyte types are alkali, molten carbonate, phosphoric acid, proton exchange membrane (PEM), and solid oxide. The first three are liquid electrolytes, the last two are solids. 

Proton exchange membrane fuel cells (PEMFCs) work with a polymer electrolyte in the form of a thin, permeable sheet. The PEMFCs, otherwise known as polymer electrolyte fuel cells (PEFC), are of particular importance for the use in mobile and small/medium-sized stationary applications (Pehnt, 2001). The PEM fuel cells are considered to be the most promising fuel cell for power generation (Kazim, 2000). 

Polyphosphazene-based PEMs are potentially attractive materials for both hydrogen/air and direct methanol fuel cells because of their reported chemical and thermal stability and due to the ease of chemically attaching various side chains for ion exchange sites and polymer cross-linking onto the — P=N— polymer backbone. Polyphosphazenes were explored originally for use as elastomers and later as solvent-free solid polymer electrolytes in lithium batteries, and subsequently for proton exchange membranes. 

Figure 29. Conductivity of some intermediate-temperature proton conductors, compared to the conductivity of Nafion and the oxide ion conductivity of YSZ (yttria-stabilized zirconia), the standard electrolyte materials for low- and high-temperature fuel cells, proton exchange membrane fuel cells (PEMFCs), and solid oxide fuel cells (SOFCs).

The principles of the fuel cell are illustrated in Figure 1.1. The electrochemical cell consists of two electrodes, an anode and a cathode, which are electron conductors, separated by an electrolyte [e.g. a proton exchange membrane (PEM) in a PEMFC or in a DAFC], which is an ion conductor (as the result of proton migration and diffusion inside the PEM). An elementary electrochemical cell converts directly the chemical... 

---