Displacement alcohol

Higher alkoxides, such as tetra(2-ethylhexyl) titanate, TYZOR TOT [1070-10-6], can be prepared by alcohol interchange (transestenfication) in a solvent, such as benzene or cyclohexane, to form a volatile a2eotrope with the displaced alcohol, or by a solvent-free process involving vacuum removal of the more volatile displaced alcohol. The affinity of an alcohol for titanium decreases in the order primary > secondary > tertiary, and... 

An interesting variation of this reaction that made use of a three-component, one-pot solventless procedure with the corresponding trialkyl phosphites gave dramatically improved yields of many heterosubstituted glyphosate phosphonate diesters (37). When exactly one equivalent of water, 25, and tris-p-chloroethyl phosphite were mixed and heated under neat conditions for a few hours, nearly quantitative yields of displaced p-chloroethanol and the desired triester product 27 were obtained. If desired, the displaced alcohol was first removed by vacuum distillation, or the mixture could be hydrolyzed directly to GLYH3. Various oxygen, sulfur, nitrogen, cyano, and carboxylate functionalities were similarly accommodated in the trialkyl phosphite. 

In this reaction, the ether oxygen is first protonated, turning the potential leaving group in an Sn2 reaction from alkoxide, OR, into the much more easily displaced alcohol, HOR. The displacement itself is accomplished by the halide ion formed when the ether is protonated. This reaction is quite analogous to the reaction of alcohols with haloacids.The halide must be a nucleophile strong enough to do the displacement, and the reaction is subject to the limitations of any Sn2 reaction (Fig. 7.40). 

The reactants are boiled under reflux in equimolar amounts, with or without solvent, and the displaced alcohol is then removed by distillation. Some acidic catalysts such as p-toluenesulphonic acid have been employed successfully. The following reaction (Eq. 3.133) is given as an example ... 

Ethylamine, monoethylamine, CH3CH2NH2-B.p. 19 C. Prepared by reduction of acetonitrile or by heating ethyl chloride with alcoholic ammonia under pressure. It is a strong base and will displace ammonia from ammonium salts. Forms a crystalline hydrochloride and also crystalline compounds with various metallic chlorides. 

Place a solution of 10 -4 g. of benzalacetophenone, m.p. 57° (Section IV,130) in 75 ml. of pure ethyl acetate (Section 11,47,15) in the reaction bottle of the catalytic hydrogenation apparatus and add 0 2 g. of Adams platinum oxide catalyst (for full experimental details, see Section 111,150). Displace the air with hydrogen, and shake the mixture with hydrogen until 0 05 mol is absorbed (10-25 minutes). Filter oflF the platinum, and remove the ethyl acetate by distillation. RecrystaUise the residual benzylacetophenone from about 12 ml. of alcohol. The yield of pure product, m.p. 73°, is 9 g. 

In the reaction of aryl and alkenyl halides with 1,3-pentadiene (248), amine and alcohol capture the 7r-allylpalladium intermediate to form 249. In the reactions of o-iodoaniline (250) and o-iodobenzyl alcohol (253) with 1,3-dienes, the amine and benzyl alcohol capture the Tr-allylpalladium intermediates 251 and 254 to give 252 and 255[173-175]. The reaction of o-iodoaniline (250) with 1,4-pen tadiene (256) affords the cyclized product 260 via arylpalladiuni formation, addition to the diene 256 to form 257. palladium migration (elimination of Pd—H and readdition to give 258) to form the Tr-allylpalladium 259, and intramolecular displacement of Tr-allylpalladium with the amine to form 260[176], o-Iodophenol reacts similarly. 

The rather unreactive chlorine of vinyl chloride can be displaced with nucleophiles by the catalytic action of PdCb. The conversion of vinyl chloride to vinyl acetate (797) has been studied extensively from an industrial standpoint[665 671]. DMF is a good solvent. 1,2-Diacetoxyethylene (798) is obtained from dichloroethylene[672]. The exchange reaction suffers steric hindrance. The alkenyl chloride 799 is displaced with an acetoxy group whereas 800 and 801 cannot be displaccd[673,674]. Similarly, exchange reactions of vinyl chloride with alcohols and amines have been carried out[668]. 

Simple ketones and esters are inert. On the other hand, nitroalkanes react smoothly in r-butyl alcohol as a solvent with butadiene, and their acidic hydrogens are displaced with the octadienyl group. From nitromethane, three products, 64, 65, and 66, are formed, accompanied by 3-substituted 1,7-octadiene as a minor product. Hydrogenation of 65 affords a fatty amine 67 which has a primary amino function at the center of the long linear chain[46,61]. 

With primary alcohols Ihe nexl slage is an 8 2 reaclion m which Ihe halide ion bro mide for example displaces a molecule of water from Ihe alkyloxonium ion... 

The reactions of alcohols with hydrogen halides to give alkyl halides (Chapter 4) are nucleophilic substitution reactions of alkyloxonium ions m which water is the leaving group Primary alcohols react by an 8 2 like displacement of water from the alkyloxonium ion by halide Sec ondary and tertiary alcohols give alkyloxonium ions which form carbo cations m an S l like process Rearrangements are possible with secondary alcohols and substitution takes place with predominant but not complete inversion of configuration... 

The reaction of alcohols with acyl chlorides is analogous to their reaction with p toluenesulfonyl chloride described earlier (Section 8 14 and Table 15 2) In those reactions a p toluene sulfonate ester was formed by displacement of chloride from the sulfonyl group by the oxygen of the alcohol Carboxylic esters arise by displacement of chlonde from a carbonyl group by the alcohol oxygen... 

Until World War 1 acetone was manufactured commercially by the dry distillation of calcium acetate from lime and pyroligneous acid (wood distillate) (9). During the war processes for acetic acid from acetylene and by fermentation supplanted the pyroligneous acid (10). In turn these methods were displaced by the process developed for the bacterial fermentation of carbohydrates (cornstarch and molasses) to acetone and alcohols (11). At one time Pubhcker Industries, Commercial Solvents, and National Distillers had combined biofermentation capacity of 22,700 metric tons of acetone per year. Biofermentation became noncompetitive around 1960 because of the economics of scale of the isopropyl alcohol dehydrogenation and cumene hydroperoxide processes. 

Lubricants, Fuels, and Petroleum. The adipate and azelate diesters of through alcohols, as weU as those of tridecyl alcohol, are used as synthetic lubricants, hydrauHc fluids, and brake fluids. Phosphate esters are utilized as industrial and aviation functional fluids and to a smaH extent as additives in other lubricants. A number of alcohols, particularly the Cg materials, are employed to produce zinc dialkyldithiophosphates as lubricant antiwear additives. A smaH amount is used to make viscosity index improvers for lubricating oils. 2-Ethylhexyl nitrate [24247-96-7] serves as a cetane improver for diesel fuels and hexanol is used as an additive to fuel oil or other fuels (57). Various enhanced oil recovery processes utilize formulations containing hexanol or heptanol to displace oil from underground reservoirs (58) the alcohols and derivatives are also used as defoamers in oil production. 

Alkyl esters of trifluoromethanesulfonic acid, commonly called triflates, have been prepared from the silver salt and an alkyl iodide, or by reaction of the anhydride with an alcohol (18,20,21). Triflates of the 1,1-dihydroperfluoroalkanols, CF2S020CH2R can be prepared by the reaction of perfluoromethanesulfonyl fluoride with the dihydroalcohol in the presence of triethylamine (22,23). Triflates are important intermediates in synthetic chemistry. They are among the best leaving groups known, so they are commonly employed in anionic displacement reactions. 

Capacity Limitations and Biofuels Markets. Large biofuels markets exist (130—133), eg, production of fermentation ethanol for use as a gasoline extender (see Alcohol fuels). Even with existing (1987) and planned additions to ethanol plant capacities, less than 10% of gasoline sales could be satisfied with ethanol—gasoline blends of 10 vol % ethanol the maximum volumetric displacement of gasoline possible is about 1%. The same condition apphes to methanol and alcohol derivatives, ie, methyl-/-butyl ether [1634-04-4] and ethyl-/-butyl ether. 

Displacement of activated chlorine atoms also proceeds with certain types of organic compounds, but only in the presence of Lewis acid catalysts. Particular examples include epoxides, polyhydric alcohols, trialkylphosphites (12), and P-aminocrotonates (13). These additives are commonly used in conjunction with metallic stabilizers to provide complete, high performance, commercial stabilizer packages. 

Phosphites. Tertiary phosphites are also commonly used and are particularly effective ia most mixed metal stabilizers at a use level of 0.25—1.0 phr. They can take part ia a number of different reactions duting PVC processing they can react with HCl, displace activated chlorine atoms on the polymer, provide antioxidant functionaHty, and coordinate with the metals to alter the Lewis acidity of the chloride salts. Typical examples of phosphites are triphenyl phosphite [101 -02-0], diphenyl decyl phosphite [3287-06-7], tridecyl phosphite [2929-86-4], and polyphosphites made by reaction of PCl with polyols and capping alcohols. The phosphites are often included in commercial stabilizer packages. 

Alcohol ethoxysulfates have been used in field tests as nitrogen (177) and carbon dioxide (178) foaming agents. Field use of alcohol ethoxysulfates is restricted to low temperature formations owing to its limited hydrolytic stabihty at low pH and elevated temperature (179). It has been reported that some foams can reduce residual oil saturation, not by oil displacement, but by emulsification and imbibition of the oil into the foam (180). 

Microbial-enhanced oil recovery involves injection of carefully chosen microbes. Subsequent injection of a nutrient is sometimes employed to promote bacterial growth. Molasses is the nutrient of choice owing to its low (ca 100/t) cost. The main nutrient source for the microbes is often the cmde oil in the reservoir. A rapidly growing microbe population can reduce the permeabiHty of thief zones improving volumetric sweep efficiency. Microbes, particularly species of Clostridium and Bacillus, have also been used to produce surfactants, alcohols, solvents, and gases in situ (270). These chemicals improve waterflood oil displacement efficiency (see also Bioremediation (Supplement)). 

Displacement of a volatile with a nonvolatile alcohol is an important reaction for curing paint films with amino cross-linkers and amino resias on textile fabrics or paper. FoUowiag is an example of a methoxymethyl group on an amino resia reacting with a hydroxyl group of a polymer chain. 

Etherification. Ethers of amyl alcohols have been prepared by reaction with ben2hydrol (63), activated aromatic haUdes (64), dehydration-addition reactions (65), addition to olefins (66—71), alkoxylation with olefin oxides (72,73) and displacement reactions involving thek alkah metal salts (74—76). 

Displacement of the hydroxyl group is exemplified by the production of isopropyl haUdes, eg, isopropyl bromide [75-26-3] by refluxing isopropyl alcohol with a halogen acid, eg, hydrobromic acid [10035-10-6] (12). 

Solvent for Displacement Reactions. As the most polar of the common aprotic solvents, DMSO is a favored solvent for displacement reactions because of its high dielectric constant and because anions are less solvated in it (87). Rates for these reactions are sometimes a thousand times faster in DMSO than in alcohols. Suitable nucleophiles include acetyUde ion, alkoxide ion, hydroxide ion, azide ion, carbanions, carboxylate ions, cyanide ion, hahde ions, mercaptide ions, phenoxide ions, nitrite ions, and thiocyanate ions (31). Rates of displacement by amides or amines are also greater in DMSO than in alcohol or aqueous solutions. Dimethyl sulfoxide is used as the reaction solvent in the manufacture of high performance, polyaryl ether polymers by reaction of bis(4,4 -chlorophenyl) sulfone with the disodium salts of dihydroxyphenols, eg, bisphenol A or 4,4 -sulfonylbisphenol (88). These and related reactions are made more economical by efficient recycling of DMSO (89). Nucleophilic displacement of activated aromatic nitro groups with aryloxy anion in DMSO is a versatile and useful reaction for the synthesis of aromatic ethers and polyethers (90). 

The standard manufacturing method for tetraalkyl titanates, such as TYZOR TPT, or tetra- -butyi titanate, TYZOR TBT [5593-70 ] involves the addition of TiCl to an alcohol. In a series of reversible displacement reactions, the alkoxy substitution products and hydrochloric acid form as follows ... 

---