Aromatic nitro groups

Aromatic and aliphatic nitro groups Aromatic azo groups (reduction to amine)... 

Reduction of Nitro- to Amino-groups. - Sulphide catalysts continue to find application in selective hydrogenation of nitro-groups. Aromatic nitro-groups in the presence of acetylenes were selectively hydrogenated (373 K, 25-70 atm, in isopropanol) to amino-groups over cobalt polysulphide and RUS2 catalysts, for example (3-nitrophenyl)acetylene to (3-aminophenyl)acetylene in 75-85% yield. ... 

Aromatic nitro groups Aromatic rings N-oxides Alkyl hydrazines Alkyl aldehydes N-methyl derivatives Monoalkenes p-Haloethyl mustards N-Chloroamines Alkyl N-nitrosoamines Alkyl esters of either phosphoric or sulfonic adds Aromatic mono- and dialkylamino groups Aromatic azo groups (because of possible reduction to aromatic amines) Aromatic and aliphatic aziridinyl derivatives Aromatic and aliphatic substituted primary alkyl halides Aromatic amines (including their N-hydroxy derivatives and the derived esters Propriolactones and propriosultones Derivatives of urethane (carbamates) Aliphatic and aromatic epoxides... 

A number of selected aromatic nitro compounds are collected in Table IV,16A, It will be noted that a few nitro aromatic esters have been included in the Table. These are given here because the nitro group may be the first functional group to be identified aromatic nitro esters should be treated as other esters and hydrolysed for final identification. 

It is convenient to include under Aromatic Amines the preparation of m-nitroaniline as an example of the selective reduction of one group in a polynitro compound. When wt-dinitrobenzene is allowed to react with sodium polysulphide (or ammonium sulphide) solution, only one of the nitro groups is reduced and m-nitroanUine results. Some sulphur separates, but the main reaction is represented by ... 

It looks as though we can get B from A (which is used in frame 247) and so the nitro group is the obvious source of the amino group. It will also allow us to hydrolyse one ether specifically by nucleophilic aromatic substitution. 

Investigations of the solubilities of aromatic compounds in concentrated and aqueous sulphuric acids showed the activity coefficients of nitrocompounds to behave unusually when the nitro-compound was dissolved in acid much more dilute than required to effect protonation. This behaviour is thought to arise from changes in the hydrogenbonding of the nitro group with the solvent. 

The diazonium salts 145 are another source of arylpalladium com-plexes[114]. They are the most reactive source of arylpalladium species and the reaction can be carried out at room temperature. In addition, they can be used for alkene insertion in the absence of a phosphine ligand using Pd2(dba)3 as a catalyst. This reaction consists of the indirect substitution reaction of an aromatic nitro group with an alkene. The use of diazonium salts is more convenient and synthetically useful than the use of aryl halides, because many aryl halides are prepared from diazonium salts. Diazotization of the aniline derivative 146 in aqueous solution and subsequent insertion of acrylate catalyzed by Pd(OAc)2 by the addition of MeOH are carried out as a one-pot reaction, affording the cinnamate 147 in good yield[115]. The A-nitroso-jV-arylacetamide 148 is prepared from acetanilides and used as another precursor of arylpalladium intermediate. It is more reactive than aryl iodides and bromides and reacts with alkenes at 40 °C without addition of a phosphine ligandfl 16]. 

Formic acid is a good reducing agent in the presence of Pd on carbon as a catalyst. Aromatic nitro compounds are reduced to aniline with formic acid[100]. Selective reduction of one nitro group in 2,4-dinitrotoluene (112) with triethylammonium formate is possible[101]. o-Nitroacetophenone (113) is first reduced to o-aminoacetophenone, then to o-ethylaniline when an excess of formate is used[102]. Ammonium and potassium formate are also used for the reduction of aliphatic and aromatic nitro compounds. Pd on carbon is a good catalyst[103,104]. NaBH4 is also used for the Pd-catalyzed reduction of nitro compounds 105]. However, the ,/)-unsaturated nitroalkene 114 is partially reduced to the oxime 115 with ammonium formate[106]... 

Neither Friedel-Crafts acylation nor alkylation reactions can be earned out on mtroben zene The presence of a strongly deactivating substituent such as a nitro group on an aromatic ring so depresses its reactivity that Friedel-Crafts reactions do not take place Nitrobenzene is so unreactive that it is sometimes used as a solvent m Friedel-Crafts reactions The practical limit for Friedel-Crafts alkylation and acylation reactions is effectively a monohalobenzene An aromatic ring more deactivated than a mono halobenzene cannot be alkylated or acylated under Friedel-Crafts conditions... 

Reduction of aryl nitro compounds (Sec tion 22 9) The standard method for the preparation of an arylamine is by nitra tion of an aromatic ring followed by reduction of the nitro group Typical re ducing agents include iron or tin in hydro chloric acid or catalytic hydro genation... 

A nitro group is a strongly activating substituent in nucleophilic aromatic substitution where it stabilizes the key cyclohexadienyl anion intermediate... 

A nitro group behaves the same way m both reactions it attracts electrons Reaction is retarded when electrons flow from the aromatic ring to the attacking species (electrophilic aromatic substitution) Reaction is facilitated when electrons flow from the attacking species to the aromatic ring (nucleophilic aromatic substitution) By being aware of the connection between reactivity and substituent effects you will sharpen your appreciation of how chemical reactions occur... 

Nitro substituted aromatic compounds that do not bear halide leaving groups react with nucleophiles according to the equation... 

Chloromethylation of the aromatic nucleus occurs readily with alkyl and alkoxy substituents accelerating the reaction and halo, chloromethyl, carboxyl, and nitro groups retarding it. 

Substituted aromatics, eg, aLkylbenzenes, sometimes experience attack at the substituent position by NO/ (7). A cyclohexadienyl cation is formed it is unstable and the nitro group migrates on the ring to a carbon atom that is attached to a hydrogen. Loss of the proton results in a stable nitroaromatic. 

Analytical and Test Methods. o-Nitrotoluene can be analyzed for purity and isomer content by infrared spectroscopy with an accuracy of about 1%. -Nitrotoluene content can be estimated by the decomposition of the isomeric toluene diazonium chlorides because the ortho and meta isomers decompose more readily than the para isomer. A colorimetric method for determining the content of the various isomers is based on the color which forms when the mononitrotoluenes are dissolved in sulfuric acid (45). From the absorption of the sulfuric acid solution at 436 and 305 nm, the ortho and para isomer content can be deterrnined, and the meta isomer can be obtained by difference. However, this and other colorimetric methods are subject to possible interferences from other aromatic nitro compounds. A titrimetric method, based on the reduction of the nitro group with titanium(III) sulfate or chloride, can be used to determine mononitrotoluenes (32). Chromatographic methods, eg, gas chromatography or high pressure Hquid chromatography, are well suited for the deterrnination of mononitrotoluenes as well as its individual isomers. Freezing points are used commonly as indicators of purity of the various isomers. 

I itro-DisplacementPolymerization. The facile nucleophilic displacement of a nitro group on a phthalimide by an oxyanion has been used to prepare polyetherimides by heating bisphenoxides with bisnitrophthalimides (91). For example with 4,4 -dinitro monomers, a polymer with the Ultem backbone is prepared as follows (92). Because of the high reactivity of the nitro phthalimides, the polymerkation can be carried out at temperatures below 75°C. Relative reactivities are nitro compounds over halogens, Ai-aryl imides over A/-alkyl imides, and 3-substituents over 4-substituents. Solvents are usually dipolar aprotic Hquids such as dimethyl sulfoxide, and sometimes an aromatic Hquid is used, in addition. 

---