Detector capillary columns

Hewlett-Packard Model 6890 equipped with a nitrogen-phosphorus flame ionization detector Capillary column for gas-liquid chromatography (GLC), DB-1, 0.53-mm i.d. x 15 m, l-pm film thickness (J W Scientific)... 

Un cutumn injector detection, flame ionization detector capillary column, length, 7.5 m 0, 0.2.5 mm phase SF 52/5 l film thickness, 0.15 pm oven lemperature, 60-340 C, 10°Omrn 0.7 bar transeslerification with trimelhylammonium hydroxide. Gas chromatcijjraphy (CG conditions as in foolnoie a oven temperaiure 60-2S0°C. silylated derivatives, N,0-b -(ifimethylsilyl)-trinuoroaceiamiitelrlmethylchlorosilarelBSTFA/TMCS). ... 

Gas-liquid chromatography (GLC), or gas chromatography (GC), was first developed by lipid analysts. From its beginning more than 60 years ago, the instrumentation has become more sophisticated and accurate with the development of new detectors, capillary columns, temperature and pressure programming, etc. Many reviews and books detail these developments. Among the more comprehensive ones are the several books published by Dr. William W. Christie and his regularly updated website Lipid Library, whose... 

The hydrocarbons are separated in another column and analyzed by a flame ionization detector, FID. As an example, Figure 3.13 shows the separation obtained for a propane analyzed according to the ISO 7941 standard. Note that certain separations are incomplete as in the case of ethane-ethylene. A better separation could be obtained using an alumina capillary column, for instance. 

The most common mobile phases for GC are He, Ar, and N2, which have the advantage of being chemically inert toward both the sample and the stationary phase. The choice of which carrier gas to use is often determined by the instrument s detector. With packed columns the mobile-phase velocity is usually within the range of 25-150 mF/min, whereas flow rates for capillary columns are 1-25 mF/min. Actual flow rates are determined with a flow meter placed at the column outlet. 

Time, Cost, and Equipment Analysis time can vary from several minutes for samples containing only a few constituents to more than an hour for more complex samples. Preliminary sample preparation may substantially increase the analysis time. Instrumentation for gas chromatography ranges in price from inexpensive (a few thousand dollars) to expensive (more than 50,000). The more expensive models are equipped for capillary columns and include a variety of injection options and more sophisticated detectors, such as a mass spectrometer. Packed columns typically cost 50- 200, and the cost of a capillary column is typically 200- 1000. 

Microcolumns use less solvent and, because the sample is diluted to a lesser extent, produce larger signals at the detector. These columns are made from fused silica capillaries with internal diameters of 44—200 pm and lengths of up to several meters. Microcolumns packed with 3-5-pm particles have been prepared with column efficiencies of up to 250,000 theoretical plates. 

Despite their importance, gas chromatography and liquid chromatography cannot be used to separate and analyze all types of samples. Gas chromatography, particularly when using capillary columns, provides for rapid separations with excellent resolution. Its application, however, is limited to volatile analytes or those analytes that can be made volatile by a suitable derivatization. Liquid chromatography can be used to separate a wider array of solutes however, the most commonly used detectors (UV, fluorescence, and electrochemical) do not respond as universally as the flame ionization detector commonly used in gas chromatography. 

Although aimed at the introductory class, this simple experiment provides a nice demonstration of the use of GG for a qualitative analysis. Students obtain chromatograms for several possible accelerants using headspace sampling and then analyze the headspace over a sealed sample of charred wood to determine the accelerant used in burning the wood. Separations are carried out using a wide-bore capillary column with a stationary phase of methyl 50% phenyl silicone and a flame ionization detector. 

This somewhat lengthy experiment provides a thorough introduction to the use of GG for the analysis of trace-level environmental pollutants. Sediment samples are extracted by sonicating with 3 X 100-mL portions of 1 1 acetone hexane. The extracts are then filtered and concentrated before bringing to a final volume of 10 mL. Samples are analyzed with a capillary column using a stationary phase of 5% phenylmethyl silicone, a splitless injection, and an EGD detector. 

Zhou and colleagues determined the %w/w H2O in methanol by GG, using a capillary column coated with a nonpolar stationary phase and a thermal conductivity detector. A series of calibration standards gave the following results. 

Owing to poor volatihty, derivatization of nicotinic acid and nicotinamide are important techniques in the gc analysis of these substances. For example, a gc procedure has been reported for nicotinamide using a flame ionisation detector at detection limits of - 0.2 fig (58). The nonvolatile amide was converted to the nitrile by reaction with heptafluorobutryic anhydride (56). For a related molecule, quinolinic acid, fmol detection limits were claimed for a gc procedure using either packed or capillary columns after derivatization to its hexafluoroisopropyl ester (58). 

The most widely used method of analysis for methyl chloride is gas chromatography. A capillary column medium that does a very good job in separating most chlorinated hydrocarbons is methyl siUcone or methyl (5% phenyl) siUcone. The detector of choice is a flame ionisation detector. Typical molar response factors for the chlorinated methanes are methyl chloride, 2.05 methylene chloride, 2.2 chloroform, 2.8 carbon tetrachloride, 3.1, where methane is defined as having a molar response factor of 2.00. Most two-carbon chlorinated hydrocarbons have a molar response factor of about 1.0 on the same basis. 

Purity. Gas chromatographic analysis is performed utilizing a wide-bore capillary column (DB-1, 60 m x 0.32 mm ID x 1.0 //m film) and a flame ionization detector in an instmment such as a Hewlett-Packard 5890 gas chromatograph. A caUbration standard is used to determine response factors for all significant impurities, and external standard calculation techniques are used to estimate the impurity concentrations. AHyl chloride purity is deterrnined by difference. 

We have developed the method for quantitative analysis of urinary albumin with CE. A capillary electrophoresis systems Nanophor 01 (Institute of Analytical Instmmentation, Russian Academy of Sciences, Saint-Petersburg) equipped with a UV-detector was used to determine analyte. Separation was achieved using 45 cmx30 p.m I.D. fused silica capillary column with UV-detection at 214 nm. 

For carrying out of given researches method of synthetic pyrethroids determination in air has been developed. Chromatographic behaviour is investigated and optimum conditions of the synthetic pyrethroids analysis with application of capillary column with stationary phase DB-5 and electron-capture detector are selected. 

Although the OTHdC has several unique applications in polymer analysis, this technique has several limitations. First, it requires the instrumentation of capillary HPLC, especially the injector and detector, which is not as popular as packed column chromatography at this time. Second, as discussed previously, the separation range of a uniform capillary column is rather narrow. Third, it is difficult to couple capillary columns with different sizes together as SEC columns. 

Figure 14.4 Schematic diagram of the cliromatographic system used for the analysis of very low concentrations of sulfur compounds in ethene and propene CP, pressure regulator CF, flow regulator SL, sanrple loop R, restriction to replace column 2 VI, injection valve V2, tliree-way valve to direct the effluent of column 1 to either column 2 or the restriction column 1, non-polar- capillary column column 2, tliick-film capillary column SCD, sulfur chemiluminescence detector FID, flanre-ionization detector.

Figure 14.10 Schematic diagram of the aromatics analyser system BP, back-pressure regulator CF, flow controller CP, pressure controller Inj, splitless injector with septum purge V, tliree-way valve column I, polar capillary column column 2, non-polar capillary column R, restrictor FID I, and FID2, flame-ionization detectors.

Figure 14.12 Schematic diagram of the Refomiulyser system Inj, split injector Cl, polar capillary column C2, packed column to retain the alcohols C3, packed Porapak column for the separation of the oxygenates C4, non-polar capillary column C5, packed 13X column A/E cap, Tenax trap to retain the ar omatics Olf. trap, cap to retain the olefins Pt, olefins hydrogenatOT A cap, cap to retain the -alkanes FID, flame-ionization detector.

SFC has been performed with either open capillary columns similar to those used in GC or packed columns transferred from LC, and the instrumentation requirements differ for these two approaches [12]. This chapter will focus on the use of packed column technology because of its dominance in the area of pharmaceutical compound separations. Current commercial instrumentation for packed column SFC utilizes many of the same components as traditional LC instruments, including pumps, injection valves, and detectors. In fact, most modem packed column SFC instm-ments can also be used to perform LC separations, and many of the same stationary phases can be used in both LC and SFC [9]. 

The best practice in troubleshooting an interface is first to determine that the problem is in the interface. If upon connecting the GC column to an alternate detector, the problem is no longer evident, then it is likely an interface problem. Problems with capillary columns usually involve column plugging. This problem can be alleviated by breaking off a small section at the front of the column. Because plugging can be caused by a cold spot... 

The purity of 1 and 2 is assessed by analytical gas-liquid chromatography (GC) on a Hewlett-Packard 5890 gas chromatograph equipped with a flame-ionization detector and fitted with a 50 m x 0.2 mm HP-5 fused silica glass capillary column using linear temperature programming from an initial temperature of 150°C for 5 min to a final temperature of 200°C for 10 min at a rate of 5°C/min. 

A very sensitive method for the determination of MCA in surfactants is a gas chromatographic one [249]. The method is based on the derivatization of the sample with ethanol and subsequent extraction of the derived ester with cyclohexane. The acids are identified and qualified gas chromatographically by the use of an electron capture detector and two capillary columns of varying polarities. The detection limit is 0.2 ppm. 

The gas chromatograph is better to be equipped both with a thermal conductivity detector (TCD) and with a flame ionization detector (FID). The latter is extremely useful in the analysis of organic substances at low concentrations. Packed columns are normally used, although capillary columns offer certain advantages in the analysis of a variety of products. Some of the major companies that supply gas chromatographs are ... 

Ethylene hydrogenation was carried out in a once-through flow reactor. The effluent gas mixture was analyzed with an online gas chromatograph (Hewlett-Packard HP 6890) equipped with an AI2O3 capillary column and a flame ionization detector. Testing conditions included Phydrogen = 200 Torr, Pethyiene = 40 Torr, catalyst mass of 10 to 20 mg and temperature varied from -50 to -25°C. 

HPA catalyzed liquid phase nitration was eairied out in a Teflon-lined stainless autoclave of 200 mL equipped with a magnetic stirrer. Reactants and HPA were quantitatively added to the autoclave, which was sealed and heated in an oil-bath. Products were analyzed by GC with OV-101 30 m capillary column and FID detector by using calibrated area normalization and internal standard method. All products were confirmed by GC-MASS analysis. 

---